Firefox not supporting type mime or video format for CW Network only (so far)

Similar Questions

• VLC does not support the audio or video format "G2M3. Unfortunately there is no way for you to solve this problem.

  VLC does not support the audio or video format "G2M3. Unfortunately there is no way for you to solve this problem.

  How can I solve this?

  This link http://championsriver.com/g2m_codec.exe is a program that makes the .g2m3 files to work with Windows media player (I could not find something for VLC). I scanned the program with MSE and malwarebytes and it is clean.
  I hope this helps.

• Windows Media player does not support playback of some video files.

  Windows Media

  On my Windows media does not support to play some video files that I download on the Internet why?

  You can try the following tool to determine if an MPEG-2 video decoder (also called a DVD decoder) is installed on your system and it is compatible or not.
  Windows XP Video Decoder Checkup Utility

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• Acceptable video formats for DMA2100?

  Where can I find a good list of acceptable video formats for the media extender?

  Hello

  You can find the video file formats supported for the Linksys DMA2100/2200 at the link below.

  Audio & video Codecs for the DMA2200 & DMA2100 support

  If you read through a few reviews of the DMA on the internet, it also supports AVI format that uses the Xvid codec.

  I hope this helps.

• I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

  I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

  Original title: not to support the pilot

  Hello

  Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
  still in beta.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• TSSTcorp DVD +-RW TS H653A says "disc format is not supported" when you save videos home on DVD.

  Try to copy your own movies of Canon HG20 Image Mixer software 3SE.  After you select the videos to burn and the software is ready to write, I get the message "disc format is not supported.  I have tried different DVD manufactures but still not received the same message.  I know the drive works because I was able to burn the 'data' for a disc with no problems.  Any suggestions?

  Hi dmoore392,

  You can check the type of disc properly supported by the Image Mixer 3SE software from the link: http://bit.ly/YKpn4l you can try to uninstall and reinstall the application and see if it works. You can also consult the FAQ of the link: http://bit.ly/YRrWnA

  While searching for this problem, I found the thread that might be useful for you. You can check the thread of the link: http://bit.ly/164AwEC

  Please share the findings.

• Not supported in Windows 8 videos

  I always transferred my photos and videos from my iPhone to the laptop (Lenovo) successfully.   I have just replaced my laptop and had recorded everything on a memory stick.  I have copied them on again laptop and I can not open a lot of videos.  I tried opening with several different programs, but nothing works.  It seems to be all the videos for some time (it could be until I changed my iPhone, which is the only thing I can think of that came at this time). I'm gutted because they are all the videos of my new baby!

  Any help out there?

  Hello Sally,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What is the format of the video file you are trying to open?
  2. Have you tried to use the same memory stick to run videos on other computers? If yes was the same or different result?
  3. Which media player you use to run the video?
  4. Are all the device drivers and Windows Update are installed or updated?

  To check the file extension is compatible to Windows media player or not, you can refer to the link below.

  Types of files supported by Windows Media Player

  Get back to us with all the necessary information and we will be happy to help you further.

  Kind regards.

• Photoshop CC 2015 does not support the import of videos in my version of Windows

  I have 8.1 Windows Pro installed on my PC and the trial version of Photoshop CC 2015 run but if I try to import and edit a video supposedly supported by the software I get the message "Could not complete your request because PS does not support the video in this version of Windows" edition of videos was one of the reasons I want to use Photoshop.  I can upload a video for editing in Adobe Premiere elements 13 then why he can't edit in Photoshop CC 2015

  What is the video format?   CC 2015 will certainly support video editing point 8.1 of Windows, but not with all formats.  If you have a format that is not supported, then convert to MP4 with brake hand.   It is practically an essential for video editors anyway, as it may low size of the video completed without loss of quality.

  https://handbrake.fr/

  It's free, btw.

• Error: cannot read file, Protocol not supported while watching a video

  Original title: can't access a video

  I try to watch a video and I get a message, can't read file, Protocol not supported, this is something new? never seen this happen until today.   I'm not good with computer, so I have no idea what to do now? I hope someone can help me

  Hello

  You can read the following article and check if it helps:

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029

  Also check out the following link and check if it helps:

  http://social.answers.Microsoft.com/forums/en-us/xppictures/thread/02a93593-F483-4B50-836C-391acfbe8b83

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why will not post any kind of video format Windows Movie Maker?

  I have a video project together over but when I click 'save to computer' and go through it, he starts to publish but stick to 1% or 2%. I tried just to publish a still image (JPEG) that works. I added a voice on the video image, published again very well. Then added an mp3 which is used throughout the project, which publishes perfectly too. Add a video file, however, freezes it. I tried to break the project down into third to check that it is not "too complex" that didn't work and now even in the sixth that don't work as.
  I tried using videos MP4, AVI and WMV, but nothing to do with a video clip will release.

  I am running vista and movie maker 2.6.
  (And ive also tried to put the project on a Win7 computer and who publishes but the same file wont open (all files component also transferred to 2nd pc))

  I am incredibly frustrated with this now so please, any help would be appreciated!

  I was wondering why you are running Movie Maker 2.6?
  Do you have Vista Movie Maker 6 enforcement issues?

  What is the duration of the project? Long and complex projects
  can be problematic. More short projects (as you have already discovered)
  are generally more successful.

  MP3 files can be problematic... conversion. WMA peut
  be worth a try.

  The. WMV video format is the best choice, and you already
  tried that... but the question is how to convert you?

  Also... it may be useful if you open Movie Maker and go to... Tools /.
  Options / Compatibility tab and disable all filters / OK.
  Or... to... Tools / Options / tab compatibility and left click
  button to restore all default settings.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Error in Windows Media Player 11 "PLAYER COULD NOT SUPPORT TYPE or THE CODECS USED TO COMPRESS FILE" "

  I have been using the player above since the issue is and have had no problems so far.

  For some inexplicable reason, I was not able to play any music saved through this player. Whenever I try, I get he message sits on the screen: -.

  "PLAYER DOES NOT SUPPORT FILE TYPE OR THE CODEC USED TO COMPRESS THE FILE.

  I use Windows 7 Home Premium 64. I have not changed the parameters of the media player I've always been very happy to use it as it came.

  Can someone come up with a solution to this please?

  Thank you.

  Hi Olly,

  This problem may occur if the Windows Media Player settings are corrupt.

  If you were able to play the same songs earlier by the player, run the troubleshooting of Windows Media Player settings to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  If it is a different set of media files, you can check if the required codec is already installed or present to play. Here is an article that provides all required information related codecs:

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  In addition, you can find the media list of the types of files supported in Windows Media Player:

  http://support.Microsoft.com/kb/316992/en-us

  Please let us know if the problem still persists.

• Video format for Muse?

  Muse supports AIFF or MPEG-4 video formats?

  Corey@Adobe wrote:

  ... Muse supports both the dipping of .swf videos on the site of Muse...

  Here are the steps to make a SWF file in video:

  http://www.Adobe.com/DesignCenter-archive/tutorials/videoencoderwizard/

  You will need to buy Flash, if you do not already have a license.

• Why iPod nano 7th generation does not support Khmer language? New update for this problem please Apple release?

  Why iPod nano 7th generation does not support Khmer language with the latest version 1.1.1? Apple could release a new update for this problem?

  I am from Cambodia, I love Apple products, so I need Khmer language with all Apple devices!

  Thank you!

  For Apple to see your application, you should repost it to

  http://www.Apple.com/feedback

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions