Firefox sometimes shows a black screen to minimize/maximize.

Similar Questions

• All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup

  All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup, no problems before

  Try to leave is SafeMode as shown here:

  Try safe mode if your Mac does not end commissioning - Apple Support

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CHKDSK replaced the security id not valid with default security id & showed a black screen with the mouse cursor

  Hi you

  After running CHKDSK, it said replacement of the security id invalid with the default security id in windows 7 64 bit

  After that it's over, he just showed a black screen with the mobile mouse cursor!

  I searched but did not find the answers on Microsoft

  Please help me

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Check the drive run at Windows startup?

  Thank you for details on the issue.

  This message is displayed because the specified file has an invalid security ID. Each file on a NTFS or FAT volume has security what ID assigned. The ID assigned to the data file does not match the ID assigned to the security data stream file ($SDS). There is a mismatch of Ids. CHKDSK replaced the invalid security ID.

  Black screen with cursor may appear due to corrupted display driver.

  I suggest you try using the steps described in this article and check.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Why some pdf files that I try to open just show a black screen?

  Why some pdf files that I try to open just show a black screen?

  Deepak,

  Thank you for your help.  Removal and reinstallation of Google has fixed the problem.

  Concerning

  John

• Firefox shows a black screen suddenly during navigation, or when left idle for a long time (more than 1 hour).

  Firefox becomes suddenly totally black, while I was watching yesterday. I tried to reboot, and it works very well. In this State, no menu or actions items are available. Even by closing the browser, I get the confirmation popup, which is also entirely black.

  Screenshot link: http://prntscr.com/55kggq

  I had to chance, click on the button "close tabs".

  I use Mozilla Firefox v33.1 in Windows 7, OS 32-bit with processor i3, 4 GB of RAM.

  If you have any problems with the current versions of Shockwave Flash plugin then check this:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• My lenovo g510 shows a black screen on startup

  My lenovo g510 shows black screen when I start sometimes. before that appears the LENOVO it shows black screen and crashes what will be the problem and what is the solution please tell.

  Please help me I am very worried for my laptop...

  

  Thank you vry much! Lenovo community is the best option to recover your problem laptop.

  Thank you!

• HP Pavilion 15 t-n200: sometimes not found black screen boot device

  Computer during the race will go sometimes to black screen and say "boot device not found", I am able to

  correct the problem by power off, wait a few seconds back, computer power will start

  Save as normal and work very well.  This happens maybe once a week. My fear is of course to some

  time not to come back to the top. Are there corrective measures, should I try now? I have a hybrid

  static hard drive (ST500LM000-1EJ162)...

  .

  Hello @jla11,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the laptop to a black screen and tried to help you!  I see that you will get the error on the hard disk.

  You might try to test the hard drive for the failure.  In this way, you can check if there are problems.  You can use the following to help:

  Laptops HP - device not found Boot error or hard drive not detected

  You should be able to skip to step 2.  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• New Hp pavilion touchsmart shows a black screen after login

  I just bought a new Hp pavilion computer printer portable all-in-one laptop / tablet that runs windows 8. It worked perfectly well until now.

  The laptop starts fine, the hp displayed logo and the login screen is displayed. After that I entered the password, it begins to load but then becomes just a black screen. My cursor is visible, but nothing else happens.

  I restarted the laptop several times. Help, please. Thank you.

  Hi all

  Please use F11, press it all right after the startup of the device. Press several times to ensure that you access the Recovery Manager.

  Then, when you're there, select the language in the first screen and then "troubleshooting." Then select advanced options. In this menu, select System Restore, to restore your system to a date before the show began.

  In case you have no restore points, in the section "Troubleshooting" menu, select "System Refresh", it reinstalls the system without erasing your data.

  In which case you can start in safe mode, try to search for a program called "SearchProtect" and if you find it, try to uninstall it.

  Let me know the results of the above suggestions.

  Thank you

• Windows 8 will not start, shows a black screen with cursor

  I tried to turn on my hybrid 3 cell / tab lenovo black this morning. After starting, it shows only a black screen with the cursor mouse mobile, but it stays like that for hours, until now. I can't turn it off, nor can I force turn it off by unplugging the battery it has unified the design of the body. What can I do?

  Hello Mel.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  How to solve a problem of black screen crash
  https://support.Lenovo.com/in/Hi/documents/ht079944
  (Also valid for Windows 8)

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• View4 with PcoIP agent shows only black screen

  View4 using customer and agent that I can connect to the virtual desktop via RDP with no problems

  Display protocol using PcoIP results in a black screen for a few seconds and view4 clients stops.

  on virtiual desktop I find the error message in c:\windows\temp\pcoip_server_2009_11_27_00000bfc.txt

  27/11/2009, 16:33:29 & gt; LVL:0 RC: 0 IMG_FRONTEND: call open screen

  27/11/2009, 16:33:29 & gt; LVL:0 RC: IMG_FRONTEND-500: cSW_HOST_FRONTEND::open_display - error attached to the SVGADevTap, error 4000: EscapeFailed

  27/11/2009, 16:33:29 & gt; LVL:0 RC: MGMT_IMG 0: cSW_HOST_IPC::enable_frontend failed. Retry...

  http://www.Google.de/search?hl=de & safe = off & client = firefox-a & rls = org.mozilla: of: official & hs = WGi & ei = cI4TS_8-xe75BtLWqbUB & his = X & oi = spell & resnum = 0 & ct = result & cd = 1 & ved = 0CBgQBSgA & q = Error + attaching + to + SVGA + Dev + Tap + error + 4000 %3 A + Escape + Failed & spell = 1

  view4 customer and agent are run on XPSP2 machines

  What version are you running to ESX? (Support is ESX 3.5 U3/U4, vSphere 4 U1)

  What was the order of installation?  (Must be VMware tools first, then view Agent. Allow reboot twice)

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• After you install an update to Adobe Flash, Firefox opens and remains black screen

  Firefox was working perfectly yesterday. When I started this morning, Adobe Flash Player was asked to run an update. I did it. Now, Firefox opens and stays black. I tried a reset safe mode and reinstall full. None worked

  Problem solved by disabling the hardware acceleration option in the advanced properties

• Monitor shows a black screen and "no sigal.

  My compaq pressario turned slowly, so used fxdisk?, but who is stuck on 74% for more than 1 hour manually off computer. but when that I start now I get a black screen and the message "no signal."

  I tried clicking on F8 nothing helps. any help to get my computer working again will be greatly appreciated.

  the main problem is the signal of monitor at the moment.   without a method to view the data on the screen there is little we can do.

  so the first initiative is: namely a signal.

  first of all, double check your wires between the monitor and the computer and make sure they are securely attached and that they are not frayed or folded.   If you have a video card on the motherboard, then disconnect the monitor to it and connect it directly to the motherboard.

  Secondly, after pressing the power button computers on the State on, try to access the bios of the computer.   wait about 3 seconds after you press the button and hold down the DELETE key, or press f10 to open the bios screen.

  If bios opens then it looks like you have a video signal from the motherboard.  You can then exit without saving the changes.

  But if you can not access the bios, then it's a problem.   Perhaps, there is a problem with the motherboard.

  so check your computer manual or online manual your computer to verify that you have taken the right steps in trying to open up the bios screen.

  second initiative: If the video signal is finally resolved, the next step will be to start with a xp installation cd.    This will bypass the faulty files on the hard drive system and allow you to run some commands in order to fix it.

• my screen shows a black screen and says to enter the system password, how do I reinstall windows if the pc is back to factory settings and wonder a system password

  Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password

  It looks like your BIOS password "may" be set.

  What brand of computer do you have?

  If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password.   If you choose to do so, please be careful because you do so at your own risk.

  WARNING:

  This response comes with absolutely no warranty express or implied.  The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.

• Computer blocks showed a BLACK screen

  The next problem is on my brother in laws machine, Vista running. Start the computer OK but after using the mouse a few times the computer hangs and also displays a black screen, resulting in a reboot. I tried a system restore, and later a defrag, but freezes before any diagnosis unit can be completed.   I use my computer to ask this question because my brother in laws unit does not work.  I hope you can help please.  Thank you, Nicholas Cooper

  Hi, Bach3g,

  Computer brand and model?

  Start the computer

  Open Device Manager

  Check the graphics card driver and the mouse driver that should perhaps be updated

  Right click on the driver, and then select properties - you see codes listed on the general tab

  You see exclamation yellow exclamation or question marks?

  If so, right click on drivers and select update

  If the system continues to freeze, go back and uninstall the drivers in question.

  Reboot and Windows will reload drivers.

  Go to the site of the manufacturer of the computer and look for the driver updates.

  Try the solution listed here: