Firepower 6.0

Similar Questions

• Registration Module software firepower to the CMF. Need a key "Reg"?

  Community,.

  I'm extremely new to the product of the power of fire and was assigned to the online in my new job. We have the power module of heat load on the x 5545 and CME loaded as a virtual machine on a server. IM at the stage now where Im trying to record the firepower to the CSP module using the Configure Manager add x.x.x.x   command in the CLI of Module of firepower. My question is, where can I get the registration key of? All the documentation says it's a key to register the module in the CSP. Unfortunately this deployment was already partially in place before I was here so I don't know what this alphanumeric key is or where to find it. Any ideas?

  Thank you!

  Hello Craddockc,

  You can use any combination of alphanumeric characters as key such as abc123.  Make sure that you add the same key when registering of firepower on CMF too.

  Note and mark the messages useful.

  Concerning

  Jetsy

• Cisco ASA 5508 with firepower of speeds VPN

  Nice day

  Can someone tell me which is better performance Anyconnect VPN or Cisco VPN?, I intend to use a VPN for my users to connect and transfer files to a shared folder speed does.

  Also, I don't want my clients to access a Web page or portal to get the client I can install the VPN client on the client labtop.

  Is it possible to do this as well?

  Hello

  The shared screenshot has the correct option is selected.

  Yes anyconnect supports IPSEC thus:

  https://supportforums.Cisco.com/discussion/11501221/Cisco-AnyConnect-DOE...

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Please visit this link for the plug ASA 5508-firepower:

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Cisco Firepower 4110 Clustering with ASA and DFT

  Hi all

  We have a pair of Cisco 4110 firepower devices and have them clustered for the ASA Security Module.

  There seems to be no option to add an additional logical device for the threat of fire power defence Module, so can only assume this is not supported in an active/active state.

  More on the SAA Module there is no tab of remote access VPN Configuration.

  So my question is how to incorporate the functionality of defense threat in the ASA, I suppose that this would be by the engine unloading in the advanced settings, but requires the SAA be in Active mode / standby and the power of fire threat defense logical device will be available?

  Second question is it would have been better buy the Cisco ASA 5585 X with the Module of firepower in support of all the regular features of the SAA as well as traffic inspection unloading to the module of firepower?

  I found some documentation on the Cisco site, but tend to lose sight of where the reference to FTD and not be supported of the Clustering or RAS VPN not supported by ASA or FXOS docs, so I was hoping for some insight on here.

  Appreciate any clarity around the support of devices 4110 of the firepower and configuration of the FTD and ASA combines the features supported.

  We run ASA v9.6 (2) and FXOS 2.0.1 (86).

  Thanks in advance.

  Mark

  On a firepower 4100 Series chassis, you can run a single logical unit. Several logical devices are supported only on the 9300 firepower that supports up to 3 modules of security.

  So choosing between types of module ASA and DFT (or technically you can also deploy the RADware vDefense Pro but it is mainly for service providers).

  One or the other and never the two.

  The module of the SAA supports remote access VPN over 4110 of firepower. I put one in place personally nothing this month. Have you recorded the chassis with the smart licence and applied ASA licenses (basic an and 3DES / AES)?

  The ASA modules take supported the HA and inter-chassis clustering on the 4100 series hardware.

  If you run picture FTD, there is currently no support for remote access VPN. It is a high priority position of roadmap for a future version (post - 6.2). FTD does not currently support the chassis inter cluster but that should be in version 6.2.

• Cannot change the access policy (firepower 6.1)

  Hello

  I use the Service Module of firepower on ASA5525 and MC, firepower, the two version 6.1.

  After the upgrade to version 6.1, I can't save any changes on my access policy. I always get a message "error saving data - another operation by another user has prevented this operation. Please try again after some time.
  I am the only on access to the MC, there is no task that is running and I tried to reload the MC, but I got the same error.

  Please, did anyone see that? This could be the cause?

  Thank you.

  I solved the problem by replacing all the objects 'Private network' by 'IPv4-private-All-RFC1918.

• Flow of firepower of ASA

  Hi guys,.

  I noticed of Palo Alto and other sellers specify a much higher rate for their new generation compared to Cisco solution, when they make the full filtering URL, antivirus and anti-spam protection

  I think it's because they treat the package in parallel where ASA he treats one by a single module, is that correct?

  For example, ASA a past traffic to URL filtering, then Spam and then...

  Where as Palo Alto passes to the URL and SPam and... all at once so achieve a significantly higher flow rate.

  on this basis, it is correct to say that Cisco may not be the dealer in this area due to how they manage the firepower?

  I think the best way to address this issue is using NSS Labs reports. They publish an annual report which includes a chart to see how much you pay by protected Mbit/sec. Given that the supplier has published performance data are not always correct that you can watch their conclusions.

  I don't know if you're talking about absolute return (e.g. 7080 PAN vs FP9300), but in case you do I would say looking at the relative numbers and check what bitrate you lose by using for example the IPS.

  Architecture: hardware wise performance will always beat the software. FPGA used for specific loads occur always better than generic processors. Parallel processing is not something that each salesperson makes. Try to not get lost in the marketing of buzz and just analyze the performance counters and see how they compare when it comes to price - at the end of the day an architecture that results in better performance of 10%, but 100% higher price might not be what you're looking for.

• Firepower does not work when using the Active Directory group as a rule filter access control

  I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

  -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

  -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

  -J' created a politics of identity with passive authentication (using the field I created)

  -Can I use the AD account "user" as a filter in access control rule and it work very well.

  However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

  I use

  -User agent firepower for Active Directory v2.3 build 10.

  -ASA 5515 software Version 9.5 (2)

  -Fire version 6.0.0 - 1005 power module

  -Firepower for VMWare Management Center

  Any suggestion would be appreciated. Thanks in advance.

  Hello

  You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

  Thank you

  Yogesh

• ASA 5515 WITH LICENSE OF FIREPOWER

  Hello support team,

  We have configured cisco ASA 5515, firepower module added in it.

  Please give technical support to add L-ASA5515-TAMÁS = (Cisco IPS of firepower ASA5515, AMP, and Licenses of URL).

  @amalmichaelvj ,

  You are welcome.

  You can switch to FMC at any time. That one type of management can be used at a time given.

  FMC is supported by VMware (5.1 and 5.5), KVM and AWS. I would say that 95% or more of the facilities use VMware as the two platforms of the latter were just be presented earlier this year.

  You can find installation guides quick for all platforms supported here: http://www.cisco.com/c/en/us/support/security/defense-center-virtual-app...

  'Control' license free of charge (also known as "Protect + Control" is required for all the firepower of ASA modules.) Without it, you will not be able to deploy and enforce and other features (i.e., IPS, filtering URL or Advance Malware Protection features that are included in your license of TAMAS type).

• CISCO ASA 5515 WITH THE VERSION OF FIREPOWER

  ASA 5515 service with the power of fire. Can be managed with ASDM firepower. ?

  Anyone suggests Versions for firepower, ASDM, ASA?

  Kindly help

  You will find it useful to install the Module of firepower on ASA for the management of the premises:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  Thank you

  Guillaume

  Rate if this can help!

• I do not have "Firepower of ASA Configuration" menu in ASDM

  Hello

  I do not have "Firepower of ASA Configuration" menu in ASDM.

  I already configured IP to the management port 0/0 10.226.24.181 also to the 10.226.24.130 of the SFP Manager.

  I can ping 10.226.24.130 ASA CLI and have tab in ASDM (with https://No DC configured the button).

  You can see in attachment

  Help, please

  You have an ASA 5525 - X and the module of firepower is 5.3.1 - 152. To manage the power light module on that platform via ASDM requires the runtime current software 6.0 or later version (and your ASDM must be 7.5 (1.112) or later version).

  Reference: http://www.cisco.com/c/en/us/td/docs/security/asdm/7_5/release/notes/rn7...

  If you want to upgrade the module of 5.3 to 6.0 and you do not have fire power manager, then the way ahead is to reimage using the 6.0 system images and boot. This procedure is illustrated below:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  You need the images available here:

  https://software.Cisco.com/download/release.html?mdfid=286271172&flowid=...

  Expand the tree on the left and look under all versions 6.0 > 6.0.0. Use the files asasfr-5500 x-boot - 6.0.0 - 1005.img and asasfr-sys - 6.0.0 - 1005.pkg.

  After getting it to work, you should also update further the the latest version (currently 6.0.1).)

• HA for firepower Modules END ASA 5585 x - SSP 40

  Hello

  I have a question.

  With two Cisco 5585 - X PHC-40 in multi-contexte mode. Both the ASA firewalls are already configured for failover for high availability.  What is the configuration of the firepower Modules get high availability if a module of firepower in one of the ASA falls down.

  Thank you

  Ravi

  Failover of the SAA will happen, because with the default service configuration module is monitored as part of the failover condition.

  Which can be changed via "no monitor-service-interface module" SAA - the command turns off service module monitoring and, if the module fails, it will not trigger the failover.

• Firepower - High CPU and latency

  Hey

  IM under firepower with a 5555 X. The FireSIGHT console to manage using.

  When sending one of our internet connected interface through the CPU power of fire leaped up 25-30% on the SAA and the latency rises with 40-150ms.

  I need to know what is the cause, Cisco licenses is expensive and I didn't know HW would pose a problem.

  The problem is worse when traffic increases. When you reach 600-700mpbs the ASA thus removes the packages.

  Thanx.

  You are very lucky if you can push 600-700Mbit/s through the FP module in your X-5555.
  With functionality STROKE and IPS, it is evaluated to 450Mbit/s, yet further with the URL and the amp on.

  If you need the functionality of the ASA, you should go with either:

  5585-X SSP EP 10/40

  SSP 5585-X 40

  5585-X SSP EP 20/60

• How to change the password of firepower

  Hello

  I install just the ASA 5555 - X with the 5.4 firepower.

  However, he doesn't want to change admin passsword during initial setup and I couldn't find what CLI update command.  Could you please tell?

  Thank you!

  ASA:

  session sfr do password-reset

• Backup of firepower of managed devices

  Hello world!

  Please help me understand what I am doing wrong.

  I want to save my power of fire management center management devices.

  I then:

  -Go to the menu: System - Tools - Backup/Restore

  -Press on: Managed Backup Device

  And the problem is that I didn't have my camera in the list of managed devices (see attachment no. name) devices.

  Please explain to me how do I backup my modules of firepower. For more information, my FP modules are added to the center of management of public Service and already configured

  Thnx

  Concerning

  This feature is limited to dedicated appliances fire power (7000 and 8000 series) and therefore does not support modules of firepower in an ASA.

  Reference: http://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration...

• Deployment of firepower of NextGen IPS with support multitenancy

  Dear,

  I have a concern about the deployment and the design of fire power next generation appliances IPS 8250 in deploying multi-tenancy, I need to have the unit of IPS inline running in two different zones (edge and DC), at the same time have a higher bandwidth with the selection of interfaces such as BP or NBP for this configuration to use this high bandwidh IPS about 10 G of a type!

  second question: what are the options of building redundant IPS solution? If no single point of failure!

  Thank you all.

  The NGIPS device support not properly shared. You may have even different policies to different interface of a given sensor, but the sensor can only belong to a single domain.

  You can use the functionality of domain management fire power Manager 6.0 to separate the access of your tenants across different managed devices:

  http://www.Cisco.com/c/en/us/TD/docs/security/firepower/60/configuration...

• Installation of firepower on redundant ASA 5512 x pair

  Hi, I am trying to install the firepower on pair redundant asa5512x that is configured in active / standby. These asas have an IPS module installed. I need to remove the old IPS module and install the module of firepower.

  I know I need to stop existing ips module, uninstall it, then load the image to start fire etc... However, I have no experience working with redundant units so I don't know how to install firepower in a configuration of active / standby.

  I tried instructions guides on how to do this upgrade of ips in a redundant pair of asa, but the only guides I've found so far speak upgrade firepower in unit asa autonomous.

  any suggestions, instructions or links to blog/sites that provide instructions step by step on the upgrade of firepower in active/standby mode would be much appreciated.

  Thanks in advance.

  I understand say you that uninstalling ips module cause failover? This should be ok because ASA 9.2.x and earlier the pair HA monitors the State of default service module and which cannot be disabled.

  9.3 ASA presented

  (no) monitor-interface service-module

  .. what allows to disable this behavior. Even on 9.2.x, however, you should be able to uninstall on the rescue unit. When you say that it didn't work, this error message do you have? Is about, I would say: 1. Uninstall secondary ips - standby. Primary-active should see module go down and score watch is not ready. 2. repeat on active primary. When the primary unit active reload, the secondary-sleep should see no assets to mate and the active role. You should now have this situation of active secondary and primary-secondary 3. Install sfr on primary-secondary. Load the boot image, perform the initial configuration module and load running image. 4. install sfr on secondary assets, including the loading and installation stages. When primary-secondary sees reloading secondary-active, it must assume the active State and be primary active. After charging high school-watch it requires correspondence module type (IE both have installed SFR). 5. Save and check the connection to the management center of FireSIGHT on two modules of sfr. 6. create and deploy strategies to the modules in the two ASAs. 7 change the service policy to redirect traffic to the module of sfr for inspection by the policies deployed on these modules, ASA.