Firmware for UCS C200 M2

Similar Questions

• UCS C200 RAID solution

  Hello

  I hope for your help about the technical question about the RAID.

  We bought a server in a rack of Cisco UCS C200. Now I looking for information on the best RAID solution in our case.

  The question:

  As I understand it, there is an integrated RAID solution: Intel ICH10R in UCS C200 server. We use this RAID configuration now and it works OK. However, we wonder if it is worth installing the PCIe controller (we have HP Smart Array P410 (ATA/dis2) card). We use currently 4 SATA and RAID drives works as expected, but we are interested in, if there are all the advantages of the separate RAID controller card. Above all, we are interested of performance benefits as we plan to have a lot of disk writes (records call - about 10-20 calls per hour, lasting 2 minutes on average). We would be happy to stay with RAID integrated if it works stable. On the other hand, we will install the above mentioned Intel RAID card if you say that it would be the best solution about the reliability and wear of the disc.

  I would be grateful for any comments.

  Kind regards

  Vytas

  Vytas,

  Your question is probably down to RAID levels supported for each card.  The performance of each should be relavitley the same, so I would not concentrate on that.

  The only supported RAID controllers are listed here and must be purchased from Cisco:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C200M1/install/RAID.html#wp1015625

  "Others' work, but you'd be yourself if you encountered problems with TAC.

  The integrated Intel ICH10R card supports up to four SATA using RAID0 (striped) or RAID1 (mirror) drives.

  If you need one RAID5, 10 or more, then you must a MegaRAID controller to do.

  All RAID controllers provided by Cisco are heavily on trial and could be your best option for reliability and performance.

  Kind regards

  Robert

• UCS C200 and NIC Teaming/FailOver

  As UCS C200 with management of a 10/100 and 10/100/two interface 1000 interfaces and PCIe with 4NIC

  I want to install CUCM 8.5 is the NIC Teaming/failover supported by UCS C200 and how to set up the NIC Managment interface with failover?

  Thank you.

  Hello

  As you install apps from the CPU on the server of the UCS, speech application team listed their recommendations here.

  http://docwiki.Cisco.com/wiki/QoS_Design_Considerations_for_Virtual_UC_with_UCS#Guidelines_for_Physical_LAN_Links.2C_Trunking_and_Traffic_Sizing

  You can create a NIC teaming in the ESXi via vSphere client software for traffic from from / destined for virtual machines.

  For C200, we have only one management port and if you use the management for MMIC traffic port, switch option is not available.

  However, if you choose to use host for MMIC traffic NETWORK ports, you can set up CIMC NIC mode for 'LOM shared' which provides the NIC teaming options.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/GUI/config/Guide/1.4.1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01000.html#concept_AC4EC4E9FA3F4536A26BAD49734F23D0

  HTH

  Padma

• CISCO UCS C200 M2 amber display clear on mem and warning

  Hello

  My company bought 5 units of CISCO UCS C200 M2. The servers are equipped with 2 x 6 core 2.67 GHz. The server was also equipped with 32 GB of ram. One of the shows Server alert light yellow on mem and warning on the front panel. Can someone tell what could possibly cause this problem?

  Thank you

  Logan

  Hi Steve,.

  There could be a faulty MEMORY Strip on the system, in the MMIC, you can check the logs SALT (System event log) that will provide you with more details.

  I give advice you open a TAC case for this, we can take a look at the tech show and understand why accurate and if necessary replace the defective DIMM module / part (if defective).

  Thank you!

  . / Afonso

• UCS C200 M2 could not start

  Hi all

  My Cisco UCS C200 could not start. Once checked, I found that the problem is the raid controller, the card may not work properly.

  the type of raid used controller is LSI MegaRAID 9260-4i

  can I replace this controller card with different types such as LSI MegaRAID 9260-8i

  If can, what should I do? are there concerns?

  Thank you for your kindness

  That should be fine.  See the documentation of the TA on the exact process of swapping the controller, but since they are of the same generation, just different port internal account (4 vs 8) and all RAID information is stored on the discs themselves, you should have no problem exchange controllers and imports of table on the new controller.  Once swap you controllers, host of startup, enter the optional ROM of LSI and check if the table is waiting for import (if she is not the automatic import).

  Kind regards

  Robert

• MMIC UCS C200 M2 blade - cannot access

  Hi all

  I was hoping someone in this forum could help with a problem I have on a customer site. We have therefore two blades UCS C200 M2 we cannot access MMIC of. When I try to reach the IP address, the browser just sits there, but the IP address is an echo request ICMP who responded. I rebooted a systems press F2 and tried to launch the utility BIOS Setup MMIC but received a message "no attention not found" and the only option was to hit very well.

  What would cause this? And should I update the firmware? If I need to update the firmware how can I go about this...?

  In addition, these systems are running ESXi 4.1, but I believe that the version of VMware is not compatible. Could someone help me confirm this?

  Any help is greatly appreciated!

  -Bobby

  Hello

  It worked before?

  If this is not the case, try resetting the MMIC or it could be a browser/java problem too. The problem exists across the browser and several pc user.

  See doc below to configure the Mmic

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/SW/CLI/CONF...

  -
  Siva

• Replacing hard drive RAID 10 (UCS-C200-M2)

  Guys,

  I'm running RAID10 on UCS C200 M2 and exchanged one of the defective drive.

  Currently, there is beep for more than 12 hours and I guess that the new drive is under reconstruction at the moment.

  In addition, physical drive status is currently on "not well configured" on CIMC. The status changes to "online" after

  the reconstruction end? Will be required reboot when the rebuild is complete?

  Please advice.

  Hello

  If the State of the reader to not configured well. You will need access to the Webbios to change online status and allow reconstruction to be undertaken.

  You will find here all the information required to set the drive to the State once again

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/SW/RAID/con...

  If by chance you encounter any problem do such thing. Call the TAC and they will help out you with it.

  Please note ALL useful answers

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• Firmware for the SSD THNSNJ128G8NU

  Hello

  I can't download the firmware for my SDS: THNSNJ128G8NU
  My laptop is a msi Ge72.
  Can you help me.

  Thank you

  I think that this firmware update is not yet available...
  Where new firmware is available, you should find it on this page:
  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Need firmware for Toshiba 40TL968 services

  Hi guys,.

  any chance someone could help me to provide the service (bin, mfc, mboot file) firmware for 40tl968?

  Im a little apart, and there is no repair of Toshiba close store.

  Thank you!

  What is the problem with your TV?

• New firmware for Toshiba 39L4333DG

  Hello

  I'm new here. Could you tell me please when I can exepect new firmware on th TV?
  It's almost a year since the last update at the same time all of my local vod applications stopped work correctlly.
  A vod owner told me that you do not support DRM features that cause the app does not work properly
  (local names of applications are ELPI, player, vod onet)
  Rafal

  Hello

  I had a question for one of Toshiba TV games firmware, you'll make new firmware for either of the sets of TV from Toshiba?
  Or you just stoped doing this.

• Where can I find Firmware for my Toshiba 40TL938G?

  Hello
  where can I find a new firmware for the Toshiba 40TL938G? I can only find on the new site software updated firmware for the 40TL933G and the 40TL936G. The 933G software is compatible with the 938G?
  The function of automatic update does not work with my TV.

  Thank you

  Dennis

  Hello

  Have a look here:
  http://www.Toshiba-OM.NET/firmware.php

  If your TV isn't listed, it means that this firmware is not yet available!

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs