Firmware SG300

Similar Questions

• Boot & Firmware SG300-28

  I received a new SG300-28 with 1.2.9.44 FW and Boot version 1.1.0.6.  A couple of weeks, I got a SG500-28 and I udated on Sx500_FW_1.3.0.62 ros and Sx500_BOOT_1.3.0.03 rfb.  I checked for the current version for the SG300-28 and I downloaded Sx300_FW_1.3.0.62.ros but found nothing to START, but they do not have a zip of MIBs_Sx300_v1.3.0.59 which is a folder full of mib and my file, any file of rfb.

  1, what is this MIB file for

  2nd, why no update BOOT file

  3rd, given that the number of revisions of the file is the same for both the SG300 and SG500 are indeed the same file or are they really adapted to the model where the name prefaced to the number.

  4th, if the files are the same then could, should I use the SG500 for the SG300 STARTUP file.  As a general rule, I would never do that with knowing so nobody knows?  I find it odd that the SG500 had new files for both and the SG300 does not work or maybe I just don't yet found.

  Hello Vini, traditionally start codes have been integrated in the firmware. On the old switches starting and firmware were 2 separate but which proved to be quite a problem.

  If you try to load the Sx500 trunk to the Sx300 switch it will probably give error of unknown or incorrect file type.

  -Tom
  Please mark replied messages useful

• Convert software SRW2048 SG300

  In my view, the SRW series is the same as basic material the SG300 series.

  Is there a way to update the firmware on the series SRW using firmware SG300?

  The SG300 firmware is much more usable. Also I'd rather have consistency we have the old SRW2024/48 and new switches SG300.

  Bob

  David,

  You are on point.

  the 300 series is an Update replacement and hardware and software of the oldest product SRW.

  If you have purchased order p/n SRW2008 the updated version here in the United States that's so order p/n SRW2008-K9-NA

  We made the change in order p/n for reasons of consistency so that if you ordered SRW2008 in the past you order now SRW2008-K9-xx

  where xx is a code region for regulatory requirements and power.

  SRW2008 was a linksys product while replacing, SRW2008-K9-NA, is for example a Cisco product that now takes care of switching L3, IPv6 and a bearable CLI and a whole bunch of new features.

  SRW2008-K9-NA has a cisco SG300-10 p/n internal.

  Refer to the following table a wide for some clarity on this subject.

  This table has been copied and pasted from the public announcement of the EOL, to October 2010 referenced in the URL that follows;

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps9967/end_of_life_notice_c51-632243.html

  Part number of end of sale product	Product description	Replacement product reference number	Replacement product description	More information
  SRW2008-EU	8-port 10/100/1000 Gigabit Switch with WebView	SRW2008-K9-G5	Managed switch of SG 300 - 10 10 Gigabit ports	-
  SRW2008MP-EU	8-port 10/100/1000 Gigabit Switch WebView Maximum Power PoE	SRW2008MP-K9-EU	Switch managed, SG 300-10MP, 10-port Gigabit PoE Max	-
  SRW2008P-EU	8-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2008P-K9-EU	Switch managed SG 300 - 10 p 10-port Gigabit PoE	-
  SRW2008P-UK	8-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2008P-K9-UK	Switch managed SG 300 - 10 p 10-port Gigabit PoE	-
  SRW2016-EU	16-port 10/100/1000 Gigabit Switch with WebView	SRW2016-K9-EU	Managed switch of SG 300 - 20 20-port Gigabit	-
  SRW2024-CN	24-port 10/100/1000 Gigabit Switch with WebView	SRW2024-K9-CN	Managed switch of SG 300 - 28 28-port Gigabit	-
  SRW2024P - TO THE	24-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2024P-K9 - TO THE	Managed switch of SG 300 - 28 p 28-port Gigabit PoE	-
  SRW2024P-EU	24-port 10/100/1000 Gigabit Switch with WebView and PoE	SRW2024P-K9-EU	Managed switch of SG 300 - 28 p 28-port Gigabit PoE	-
  SRW2048	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-NA	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-AR	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-AR	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048 - TO THE	48-Port 10/100/1000 Gigabit with 4 Combo SFP switch WebView	SRW2048-K9 - TO THE	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-CN	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-CN	Managed switch of SG 300 - 52 52-port Gigabit	-
  SRW2048-EU	48-Port 10/100/1000 Gigabit Switch with WebView	SRW2048-K9-EU

  Managed switch of SG 300 - 52 52-port Gigabit

  -

  SRW2048-UK

  48-Port 10/100/1000 Gigabit Switch with WebView

  SRW2048-K9-UK

  Managed switch of SG 300 - 52 52-port Gigabit

  -

  SRW208 - TO THE

  8-port 10/100 Ethernet Switch with WebView

  SRW208-K9 - TO THE

  SF 300 - 08 8-port 10/100 managed switch

  -

  SRW208-CN

  8-port 10/100 Ethernet Switch with WebView

  SRW208-K9-CN

  SF 300 - 08 8-port 10/100 managed switch

  -

  SRW208G-EU

  8-port 10/100 Ethernet Switch with WebView, expansion Slots

  SRW208G-K9-G5

  SF 302-08 8-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW208MP

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-NA

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208MP-EU

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-EU

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208MP-UK

  8-port 10/100 Ethernet Switch WebView, Maximum power PoE

  SRW208MP-K9-UK

  SF 302-08MP 8-port 10/100 PoE Managed Switch w/Gig Links Max

  -

  SRW208P

  8-port 10/100 with WebView and PoE

  SRW208P-K9-NA

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  SRW208P - TO THE

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9 - TO THE

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW208P-EU

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9-EU

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW208P-UK

  8-port 10/100 Ethernet Switch with WebView and PoE

  SRW208P-K9-UK

  SF 302 - 08 p 8-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW224G4-CN

  24-port 10/100 + 4 Gigabit ports, 2 Combo SFP switch WebView

  SRW224G4-K9-CN

  SF 300-24 24-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4 - TO THE

  48-Port 10/100 + 4 switch with WebView Gigabit ports

  SRW248G4-K9 - TO THE

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4-EU

  48-Port 10/100 + 4-port Gigabit, 2 Combo SFP switch WebView

  SRW248G4-K9-EU

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4-UK

  48-Port 10/100 + 4-port Gigabit, 2 Combo SFP switch WebView

  SRW248G4-K9-UK

  SF 300-48 48-port 10/100 Switch managed with Gigabit Uplinks

  -

  SRW248G4P

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9-NA

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW248G4P - TO THE

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9 - TO THE

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  SRW248G4P-UK

  48-Port 10/100 + 4 switch with WebView and PoE Gigabit ports

  SRW248G4P-K9-UK

  SF 300 - 48P 48-port 10/100 PoE Managed Switch w/Gig rising

  -

  Order details on the 300 series check the following URL;

  http://www.Cisco.com/Cisco/Web/solutions/Small_Business/products/routers_switches/300_series_switches/index.HTML-tab-models

  Bob, please do not order the older SKU, but order the replacement SKU with a K9 in the p/n. These parts new or updated numbers also come with a substantial warranty, in order to check the datasheet for this information on the warranty.

  Best regards, Dave

• Firmware 1.4.0.88 for SG300-52 seems to break DHCP relay

  My VLAN to end my switches, so I use a DHCP relay with Option82 to distribute addresses for the subnet of the VIRTUAL LAN. After the transition from 1.3.7.18 to 1.4.0.88, DHCP isn't being delivered on my VLAN. Does anyone else have this problem?

  I'm just creating DHCP relay for the first time with my SG 300-28, 1.4.0.88 firmware and noticed that the DHCPDISCOVER promulgated by the relay had the same source and destination (67) port, while the original DHCPDISCOVER used 67 & 68. In addition the 1.3.7.18 firmware is not exchange these autour:

  Excerpts from Wireshark:

  1.4.088-

  Original DHCPDISCOVER to the customer:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  Relayed SG300 DHCPDISCOVER:

  User Datagram Protocol, Src Port: bootps (67), Dst Port: bootps (67)

  This seems a bit suspect to me

  1.3.7.18

  Original DHCPDISCOVER to the customer:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  Relayed SG300 DHCPDISCOVER:

  User Datagram Protocol, Src Port: bootpc (68), Dst Port: bootps (67)

  I am not sure that this is your problem (it does not solve my problem), but I want to underline the thought

• The SG300 1.3.5.58 firmware upgrade problem

  Hello

  We have two new switches SG300 managed. I updated the firmware of the stock to 1.3.5.58 without problem, but when I upgrade to the new firmware - 1.4.x I get the following error on the two switches:

  The files transferred: 7011840
  Status: Failed to copy
  Error message: copy: the code SW file size is more

  No idea what is the problem? I can't find any option to delete old images. Thank you

  Hello

  you do the upgrade via the web interface? I did the upgrade of 1.3.7.18 without any problem.

  What is your bootloader version? 'show Version' on the command line.

  Kind regards

  Lukasz

• The SG300 - 28 p - Firmware upgrade error

  Greeting is I downloaded Sx300_FW_Boot_1.4.0.88 update of firmware for switch SG300 - 28 p. The MD5 of the file signature match as listed on Cisco, but when I'm the download of the firmware (file .ros) to the switch I get the error message:

  Bytes transferred: 7011840

  Status: Failed to copy
  Error message: copy: the code SW file size is more

  Anyone else having the same problem? No work around?

  Thank you!

  Parth.

  Hello

  I like to think to upgrade the bootloader file(sx300_boot-13506.rfb) first, before trying the firmware. Boot loader are on the same zip folder as the firmware.you can use TFTP server to upgrade the bootstrapper.

  Interface WEB SG300 Cisco > Administration > file management > TFTP... When you select TFTP option for the fw 'BOOT' button is now available. Just type the name of the file and it should load the boot firmware.

  concerning

  Deborah

• The SG300 1.3.0.59 firmware bug

  Hi all, I am having trouble with this firmware in a SG300-28 switch. In fact the DHCP server, a new feature in this version of firmware, does not work properly. DHCP static public reservations do not work: customer ID and MAC address are not recognized properly, and the DHCP server assigns the first free IP address in the pool, rather than reserved.

  If Cisco engineers reading this, plese fix.

  The issue is well documented in this thread, and it is present in the 500 series too:

  https://supportforums.Cisco.com/message/3941468#3941468

  Any help is appreciated.

  Thanks, Andrea

  Hello Andrea, the command is available on the global config

  Configure the terminal

  The dhcp server IP

  If the command is not available, it is because you do not use 1.3.0.59 at least. I'm under 1.3.0.59 and 1.3.0.62 and two software images have the command available.

  -Tom
  Please mark replied messages useful

• Firmware series SG300 SRW?

  Is it possible to Flash the firmware on a SRW2008 SG300-10?

  Hello Gerald,

  My name is Nico Muselle and I work for Cisco Small Business Support Center. Please use the support forum.

  Your question, it's indeed impossible to use the Sx300 firmware on SRW switches that have no K9 in their model name. The reason is that the new range of switches use a different hardware platform.

  For previous models of SRW, indeed the 'Web' mode is supported only in Internet Explorer, this issue was raised, but so far no solution has been provided.

  Best regards

  Nico glacier

  Cisco Small Business Support Center.

• Interface VLAN SG300-28 Firmware 1.3.7.18

  Hello

  I just my SG300 to update the last firrmware 1.3.7.1.8 and I met this problem:

  -By default, the interface VLAN has been activated, but the display is always disabled

  -I can not change and I can not ping to the VLAN IP interface as well (I gave an IP 192.168.10.1)

  Is this a bug? Does anyone know how to fix this? Please help me!

  Appreciate your help

  Minh

  minh06,

  You upgrade the startup code for Sx300_FW_Boot_1.3.5.58 ?

  -Marty

• SG300-28 - Firmware 1.2.7.76 with the MAC: how to use the VLAN? (Bugs00131469)

  Hallo,

  can you please explain to me this problem more in detail, please:

  ##################################################################

  Problem: When a port Transceiver allowed tent of to re-authenticate and RADIUS

  attributes no longer target attributes VLAN, re-authentication breaks down and the

  port must become unauthorized. This is not the case, and the port is not.

  (Bugs00131469)

  Solution: Do not delete attributes of VLANS on a RADIUS server or unplug

  network cable and plug it in again to force the failure.

  ##################################################################

  I use an assignment VLAN dynamic for my known hosts of the network (authentication MAC) based only. But there are people from other companies who use their own computer and this computer does not know on my RADIUS server. These people should use the VLAN comments. In general they disconnect the LAN cable from a host that is known on my SHELF and put the LAN cable into their laptop (which is not known by the RADIUS server).

  Does this mean that this port will remain in the VLAN old or the switch will change the port the the guest VLAN?

  And what happens if I reconnect the computer to know about this port?

  This feature is very important to me, but I need the functionality of the new firmware RADIUS accounting. So please give me some advice!

  Thank you very much!

  Alexander Wilke

  Hello, Alexander.

  When connecting to an unknown host to the switch, it should go to a VLAN authenticated or if you use the VLAN comments, it must be created statically a VLAN on the switch. With the comments-VLAN-Enable, the switch automatically assigns a port as a member not marked. When the port is allowed, the switch will have to move the port to VLAN comments when the first applicant authorizes.

  Basically, this bug listed above says not to make changes to your information RADIUS server of VLAN and if you do, unplug the network and reconnect it.

  -Tom

• SG300-10 on 1.3.7.18 Firmware has Double-Login over SSH

  Hello

  I have a big problem with switch SG300-10.

  In fact, to connect to the switch, I have to write my login and after my user name.

  It is possible to connect with my login?

  The version of the switch is 1.3.7.18.

  Thank you in advance.

  Kevin M

  Hey Kevin,

  You should be bale to overcome the problem with the logon page automatic 470:

  http://www.Cisco.com/c/dam/en/us/TD/docs/switches/LAN/CSBMs/sf30x_sg30x/...

  Kind regards

  Aleksandra

• The support of SG300 - 10 TEAR?

  Hello!

  In the documentation for the CLI of the SG 300 series, it shows sh ip rip road as a command. I installed the latest firmware and this command is no longer available. Support of the SG300 series TEAR?

  Thank you!

  Richard S.

  Hello Richard,.

  My name is David Aguilar, and I am an engineer with Cisco Small Business Center. Thanks for writing.

  The SG300 series can't RIP. Only static routes (up to 32) are supported. However, models of SG500X support the dynamic routing RIP version 2 Protocol.

  Regarding the new firmware Sx300, he added a number of security features impressive including inspection IP ARP, DHCP snooping and encryption of SSD.

  All the best,

  -David Aguilar

  Cisco Small Business Support Center

• SG200 to VLAN SG300

  Hi all

  I have a client with of several SG300 for VLAN1 for data and voice VLAN10. PCs are piggy is interrupting the phones and showing in the fine SG300:

  

  A Department has recently employed more people, so we have a SG200 switch to connect the computers and phones. I don't seem to be able to get all the connectivity between the new switch and the SG300 it should connect. I have installation VLAN1 and 10 according to the images below:

  

  

  (Most likely) I'm missing something obvious here?

  Thanks in advance.

  If all ports are 1u, 10 t between the two switches, there is a different problem.

  I guess it's possible that the new switch SX200 can act only wobbly. Pass you any firmware prior to installation?

  I probably load the latest software and the switch to make sure it isn't being weird with you.

  -Tom
  Please mark replied messages useful

• Connecting two SG300 PVLAN context.

  We own two SG300-28, set at level to 1.4.0.88 firmware.

  We want to use in a configuration PVLAN/communities, connected to a router.

  On the first switch, I can verify that I have independent communities, who have the right external connection via the promiscuous port.

  Now, I have to connect the second switch (which has the same PVLAN and communities IDs) to the first, to share communities and the promiscuous port.

  But what should be the configuration on each port of the link between the switches?

  I tried a lot of things (even a simple trunk without VLAN, as said somewhere...)  but can't a working configuration...

  Please come back to this day.  It seems to me that you don't need private VLAN for anything good.  Maybe I don't understand the private VLAN correctly, but I do not understand why they are necessary for your specified requirements that seem to describe VLAN "regular":

  All theses stations looking for these constraints:

  • All stations can access the stations of their Department, but can not see the other resorts scalable.
  • All the station can access the Internet.

• SG300-20 with the hardware V03 version?

  Hello

  I am looking for information on a SMB SG300-20 switch with hardware version V03 because I can't find any information on this subject on Cisco's Web site.

  Even the release notes of the firmwares for this family of switches indicate clearly that there are two review of material V01 and V02's mine howevever V03 thus written on the back of the unit PIN VID.

  What are the: number Total of MAC address, total number of assets of VLAN, total number of multicast for this revision of the material groups?

  And the firmware 1.4.0 is also compatible with this revision of the material?

  Can someone gently help me find an answer?

  Thank you very much

  Hello

  Response from the product team: -.

  	Total number Mac Addresses	Total number assets VLANs	Total number multicast Groups
  Sx300 in Firmware 1.4.0 HW VID = 03	46.	4 094	1 K

  Thank you.

  Kay Lee Yiu

  Concentrix at Cisco

  .:|:.:|:. CISCO | Kay Lee Yiu | Pre-sales SMB | [email protected] / * / | Phone + 1 (855) 354-7776