After being off for ten days, MBP is going very slowly

Similar Questions

• My HP HDX 18 1200 has a cooling fan make noise at startup after being off for the night.

  I don't have any document that shows how to open the unit and change the fan.  If the folder is available please either post the pdf or send them to me please.

  Can I change the fan, that I built PC for 20 years.

  Hello

  You can try to look at this document.  It's maintenance and repair for the HDX 18 series, it is not listed under manuals for your model, so it is perhaps not entirely accurate, but it should be close, since this one is listed for earlier versions of the HDX 18 series.

  R

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 4620: Network printer shows unable to communicate after being unused for 4 hours.

  Printer prints as it should after being turned on.  After being unused for about 4 hours but always enabled, when ordered to print the printer does not print and the computer displays the error "unable to communicate with printer."  However, if the printer is then turned off and then turned back on, it prints without error.

  There are a few possible solutions.

  1. Firstly - check if your firmware is up to date. (Firmware update instructions)

  2. make sure that your point of Wi - Fi networks firmware is up-to-date.

  ? -Is this wireless light (little blue light by the wireless button) stay on all four hours?

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once get to 99% with 1 s t

  I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once getting to 99% with 1 sec each time of seven or eight tests, it had frozen.  I bought this product in good faith.  I had a very expensive (bought only three months ago) PC Windows 7 with water and huge hard drives cooling system with more RAM than anyone I know not.  It is not good enough.  When I read your solutions for my problem, I read on the things written in the words I don't understand.  All I want is Lightroom 5 I won't learn all this from gobble *... I'm nearly seventy eight years... I don't have three days to mess around with your exhaust system to provide me with a product I want to use today.

  Installation errors can have all sorts of causes that should not necessarily be attributed to the material. Have you followed the standard procedures turn off security tools that may interfere? If not find newspapers install could clarify things.

  The problems with the Setup logs. CS5, CS5.5, CS6, CC

  Mylenium

• My PC starts immediately after stopping off for a considerable time

  My new PC will not start immediately after the power supply is cut off for several hours. However, it starts up after several minutes of trying. Is this a problem related to the power supply or other materials? I assembled just this new pc, and before that, it never happened. Here are the specs of my pc:

  GX650 Bronze PSU CoolerMaster; Processor Intel i5 2320; Intel DH67CL mobo. 6750 2 GB DDR3 graphics card Sapphire; 2 x 4 GB Corsair RAM; Kingston 64 GB SSD; WD 1 TB HARD drive; ASUS DVDRW
  My PC is connected to the mains through an inverter 600w APC.
  Is it possible that it could also because of the connection of power supply of the pc case itself? For the record, the case is an old one that has experienced a recent surge that destroyed my previous mobo and basically almost everything in it.

  Hi wannmann

  These forums focus on Microsoft software.

  Your best resource for the problem you describe would be the motherboard support forums. Here is a link for your convenience.

  Support of Intel communities:
  http://communities.Intel.com/Community/Tech

  Concerning

• Computer freezes constantly after being inactive for some time (windows vista, 32-bit)

  After 5-10 minutes of inactivity, the PC crashes, not alt + f4, not ctrl + alt + delete and no more choice, JUST! He can turn off my laptop! I'm going to be psychotic...

  The problem occurs in safe mode?

  Method 1 : put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: clean boot

  If the problem is not repeated in safe mode then it is likely that a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not open apps or to stop after being used for a short period (semi freezes)

  When I start the computer, everything loads normally and works very well for a while, usually an hour or two. But after being in use or left alone, I'm more able to open applications, including Notepad, Microsoft Excel, Firefox or even windows Explorer Windows. In addition, the stop menu will not be displayed. I can open the start menu, but nothing else inside, so I have to do a cold reboot every time.

  Excel is the only program that gave me any kind of error message, but it says there is not enough memory to run.

  I am running vista Home premium 32-bit with 4 GB of RAM.

  I also made sure to update all my drivers, most of my programs and even to reinstall service pack 2, but the problem persists.

  You've done a repair system/upgrade and the problem persists?  If this is the case, I sincerely doubt a clean install will do better (but he can and may be worth a try if it comes to that).  I'm now tempted to think of material.  We will check your hard drive and RAM:

  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  You can also test your RAM to http://www.memtest.org/.  If it fails, test each piece individually to find those who are bad and replace.  If it passes, the RAM is probably OK.

  Is the computer that runs particularly hot - y at - it part of it which causes the pain from too much heat so that you have to pull your hand?  The fan blows and he is blocked in any way (perhaps by a piece of paper or lint or something)?  You may need to open the case to check for this (unless it's a laptop, then just check to see if the fan is working and you can feel air blowing from the vent.

  After that, it of time for the computer repair technician to check the system hardware (NOT Geek Squad or one of these centers of department store, but a true professional) - but try following this section first to see if this is useful (and maybe try a pure install as a last resort).  The problem (if it exists) can be any number of things that you can't check yourself without special equipment spare parts (the motherboard, processor, power supply,...). Check around to find someone reputable.  Alternatively, you can return it for repair to the manufacturer (they have all the spare parts that may be required).  Find out the costs and quality of options and guarantees with the repairs and then to make your best choice.  Don't forget to backup your important data before send you it or bring it in - there is a pretty good chance that they will do something that will ask you to do a clean install even if it is probably not really necessary (but they are more interested in fixing the problem than the preservation of your data, programs and settings).  If you have a version of Vista that is capable of a complelte image backup that would be the best choice – you could just restore when they return from the machine and you will be right back where you were.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  If they test OK, then let's see what you have running on your system at startup.  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download and install Autoruns (which is a FAR superior to Vista msconfig program) and see what to load at startup.  I bet there are a lot of things, you really don't need but installed by the manufacturer when you installed programs (sometimes just so they will begin more quickly when / if requested).  Some are inportant as Windows Defender and your software AV - but I bet that most of them aren't and they use valuable resources running in the background without valid reason.  When I checked my own system I ended up remove about 90% of the items in the start menu - and the system showed an improvement notice in reactivity.  Don't worry, you can always start almost all of the programs in the menu all programs (or you can add controls to the items or create new programs that you actually launched at startup with Autoruns.

  The advice that Michael Murphy gave you already should have cleaned most of all what could be slowing down your system - and the repair/upgrade system took care of all the corruption in files on your system. I'm honestly not Kow nothing else to try (with the exception of the material option described above).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After Reinstalling windows 7, Thunderbird (now 38.2) runs very slowly

  As a result of a relocation complete Windows 7 and Thunderbird (now 38.2) runs very slowly, except for Mode without failure.

  Hardware acceleration disabled by defining gfx.direct2d.disabled true and true layers.acceleration.disabled using the configuration editor has not helped. Or upgrade to the latest display driver (Nvidea GeForce 8500 GT 9.18.13.4181 17 August 2015))

  I have very few messages in the Thunderbird folder.

  I run Avast a / v.

  Is it possible to run in permanent safe mode?

  Thank you in anticipation

  Simonides

  Solved... Although I thought I had no addons, I got Cloudmark need the update and now it works well.

  Detective Conan!

  S

• NEED HELP FOR MY ACER E1-570 GOING VERY SLOW

  CAN YOU PLEASE HELP ME I HAVE AN ACER ASPIRE LAPTOP E1-570 SOUND TURNS VERY SLOWLY I HAVE A LOT OF FILES THAT I DON, T WANT TO LOSE I THOUGHT AGAIN THE SETTINGS BACK TO THE FACTORY SETTING WOULD BE HELPING TO SPEED UP MY LAPTOP AND I'LL LOSE EVERYTHING I PUT ON IT FOR EXAMPLE FILES

  Thank you

  In my opinion, your first course of action should be to protect your files. Use what you have - maybe the stick USB memory or network to NAS etc. If your data is valuable to you, take as long as it takes to get saved.

  I've never needed to use restore but I think that you will lose your data if you use it. I could be wrong, but you should not assume that it will be secure. At this point, I would use only there as a last resort.

  Try:

  Check your HARD drive. What is full or almost full? If so, this could well be the cause of your problem and you will need to reclaim space.

  Restart, and then check your event logs - problems can appear there.

  Update and run your anti-virus program and check the results. Ensure, as far as you can, you are virus-free.

  Check your device manager for devices with problems which may affect the operation.

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• My apple ID seemed missing or deleted after being unused for awhile

  Hi, I do not know if I'm in the right place, but please correct me if I'm wrong and please direct me to the right place if I'm wrong. I'm here for my apple ID.

  I created my first Apple ID in 2012 when I got my new iPod Touch 4th generation and I got it from the end of 2014. I bought an iPad Mini 2 when I'm at College and tried to log in to my first Apple ID but he says he is not recognized and there is no such ID so I had to create a new. I was wondering if there is any way to get him back and why was it deleted? Recently, I wanted to use use this old Apple ID on my ipad, but there is no chance. I'm not really an irritable person so I don't know how to start the same and I'm not too sure about contact Apple Support, because it does not give me the option send personally.

  Thank you!

  You can click on this link and see if you can find the ID listed after providing the info, you are prompted to enter: APPLE Forgot ID.

  Enter the email address that you think that the old Apple ID used to see if it appears to you.

  See you soon,.

  GB