5.5 Flash is going very slowly. Tips to speed up?

Similar Questions

• Download Thunderbird is going very slowly then freezes before completing.

  I try to download Thunderbird and won't have a chance. The download starts, but it is going very slowly. After several minutes, he seems stuck around 2%. Then it slowly moves to 4%. I left it for an hour and he did not move from there. Any other download this same volume (28 MB) coming almost instantly. I have tried different browsers, different PCs, disabled antivirus (Windows Defender), empty the browser cache, and checked my specifications. The same thing happens again. A computer I tried is a Compaq Windows 8 with 2 GB of RAM and 1 GHz processor. The other is a Dell Windows 7 with 4 GB of RAM and 2.6 GHz processor. Both are x 64. Anyone else having this problem or knows how to solve? Is this a server problem or something wrong on my end? Thank you.

  https://drive.Google.com/file/d/0Bw-5UnM2oAFTWnVlMnNOX2tPT3M/view?USP=sharing
  I suppose you want the version en_US

• My Windows 7 computer is going very slowly and I downgrade to Windows XP.

  Sir, I have a problem in my system. in fact my system does support windows 7, but I can install them. Now my system is going very slowly, and I want to install windows xp on my system. my main problem is the windows xp installation is going very slowly. After that the copy of windows cannot run the next installation. Please tel me what I can do in this State.

  I can install windows 7 cracked version

  original title: windows xp Setup error

  and my system is

  865 Board

  Intel pentium 3.0 CPU

  1 GB of ram

  hard disk of 80

  VGA 96 MB

  superdriver

  I m waiting 4 u & your response Mr

  If you have devices non-essential attached to the system, unplug them. Windows XP Setup may attempt to detect them.

  If you have more than one hard drive installed, disconnect all except the drive that you plan to install Windows XP on.

• Portege A100 suddenly started going very slowly

  Hello

  I have a Portege A100, which suddenly began to go very slowly. It takes 5 minutes to load completely upward when it was much faster. I tried to reload Windows on it several times, but as soon as you start loading other pieces of software on the speed significantly deteriorates.

  I also tried to use software to completely clean the hard drive before Windows on it but this does not solve the problem either.

  Any help would be much appreciated.

  Hello David

  I had a similar behavior on my old satellite 1900. At the end I checked the HARD drive and there are lots of bad sectors. At the beginning everything was OK, but after the installation of a few different satellite applications was slower and slower.

  In the end, I switched HDD and everything was OK again. I recommend you to check the HARD drive to see if there are some bad sectors. If so buy new HARD drive. Repair of sector help much.

• After being off for ten days, MBP is going very slowly

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  stylianous wrote:

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  It may be that really need the new battery - or the battery that keeps the date and time.

• LR is going very slowly with metadata

  After working with a few photos, change of name, address, etc... I closed LR and the next opening of LR will extremely slow. Goes image anotxer metadata one, change a few minutes after. Can someone help me?

  Please upgrade to the latest version of Lightroom 6.6.1

  See maintaining Lightroom to update to Lightroom.

  ~ Assani

• First 10 items goes very slowly on a PROJECT

  I'm about at the end of my rope here, so I hope someone can help. I've been running first Elements 10 on my laptop for several years now and the project that I'm getting is so mired, I can't do anything, but there is nothing in this that I can suss out which explains why.

  My laptop is a Dell XPS, processor i7-2630QM, Windows 7 (64-bit), 6 GB of RAM, NVIDIA GeForce GT 550 M.

  I've never had a problem in the past. And, in fact, if I open the old projects, I don't have a problem now. It's just the project that I'm working on. If I move a clip, resize a clip, add a cache to a clip, whatever it is, the system failed for anywhere from 30 seconds to several minutes. If I play the timeline, it will go for a minute, then the preview stops with the audio continues, and I won't be able to stop it or to do anything else.

  At first, I thought it was because a clip in the tray was an element of gameplay 1080 p for four hours, I went in my capture card software and broken up into four clips of long hours, which is in line with what I had in the past projects. Not fix her. I saw some people saying that images (png, jpg, etc.) can cause problems, so I removed most of the fixed frames. Did not help. Something about this project does not run, but I'm running out of ideas on where to look. Previous projects that are still working fine when I load them upward have roughly the same amount of images, but they are not bogged down like that. Does anyone have an idea what I'm looking for? Some things about some clips or the files in the location of project? No matter what? Settings?

  Thanks in advance.

  I'm surprised to hear that the first items 10 gave you problems with previous projects with excerpts of gameplay and MP4s as your video shakewell, source. As I said, version 10 is relatively primitive, as far as working with various video sources goes. Since version 11, the program is much more versatile. I don't even know if version 10 can change MP4s natively. You'd better turn your Canon AVCHD video - or one considering a move to a new version of the program.

• USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

  Hello

  It is brand new USB STORE 1, 5 t 3.5 "disk.

  Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

  ... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

  After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

  1 is this normal behavior?
  2. What is the meaning of red light when the drive is working?

  Thank you in advance.

  Hello

  I m no owner of this HARD but I have a theory.
  According to your information, I think that the red light only appears if data would be written to the HARD disk.
  The blue light appears during the reading of data from the HARD drive.

  Welcome them

• MacBook Pro (3-inches, mid-2012) suddenly started running very slowly; Beach balls very common

  About a week and a half, it started running very slowly with the spinning beach balls popping up all the time.  This reminds me of how when I have too many tabs of the browser as in the past, but now, even with browsers had closed, open Word or Skype is really slow.  (I'm sorry for any confusing formulation; I'm not very computer customer connected, unfortunately!)

  Some of the things I've tried so far and EtreCheck below):

  -safe mode

  -detection of hardware problems (control + D)

  -reset the PRAM

  -using the utility disc for repair/first care; also check

  -wipe the hard drive and reinstalling original OS X Lion (was still slow with beach balls; I tried to install OS X El Capitan to see if that would help, but installation could not finish)

  -wipe the hard drive and restarting from a backup previous (one month before the problems started)

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-11 17:51:16

  Download https://etrecheck.com EtreCheck

  Duration 34: 39

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: Beachballing

  Description:

  also very slow in general

  Hardware information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 1054

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  System software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disk information: ⓘ

  TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 go-go (349,39 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS31N)

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 6 tasks Apple

  [loading] 164 tasks Apple

  [operation] 68 tasks Apple

  Demons of launch system: ⓘ

  [loaded] 43 tasks Apple

  [loading] 161 tasks Apple

  [operation] 85 tasks Apple

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-29)

  [loading]	com.google.Keystone.daemon.plist (2016-09-11) [Support]
  	[loading]	com Microsoft.Office.Licensing.Helper.plist (2011-03-10) [Support]

  Launch User Agents: ⓘ

  [loading]

  com.valvesoftware.SteamClean.plist (2016-05-14) [Support]

  Internet Plug-ins: ⓘ

  	FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
  	QuickTime Plugin: 7.7.3 (2016-04-05)
  	Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
  	Default browser: 601 - SDK 10.11 (2016-04-05)
  	o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-21) [Support]
  	SharePointBrowserPlugin: 14.2.4 - SDK 10.6 (2012-10-03) [Support]
  	googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]
  	Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-29) [Support]

  The internet user Plug-ins: ⓘ

  Web of Google Earth plugin: unknown (2013-01-24)

  The Safari Extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-10-14)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-29) [Support]

  Time Machine: ⓘ

  	Mobile backups: WE
  	Automatic backup: YES
  	Volumes to back up:
  	Macintosh HD: Disc size: 499,25 GB disc used: 149,86 GB
  	Destinations:
  	X. backup [Local]
  	Total size: 999,86 GB
  	Total number of backups: 7
  	An older backup: 05/01/16 17:26
  	Last backup: 28/08/16 23:43
  	Size of backup drive: adequate
  	Backup size 999,86 GB > (disc 149,86 GB X 3)

  Top of page process CPU: ⓘ

  	11%	Firefox
  	4%	kernel_task
  	3%	hidd
  	2%	sandboxd
  	2%	WindowServer

  Top of the process of memory: ⓘ

  	1.00 GB	Firefox
  	457 MB	kernel_task
  	291 MB	mdworker (15)
  	143 MB	mds_stores
  	90 MB	Microsoft Word

  Information about virtual memory: ⓘ

  	36 MB	Free RAM
  	3.96 GB	Used RAM (657 MB cache)
  	0 B	Swap used

  Diagnostic information: ⓘ

  	Sep 11, 2016, 16:37:21	Self test - passed
  	Sep 11, 2016, 09:20:57	~/Library/logs/DiagnosticReports/suggestd_2016-09-11-092057_[redacted]. Crash
  	/System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/s uggestd Thank you in advance for your answers - I'm just at a loss for what could be the real problem!

  You Mbps HARD drive is suspect.  Start the recovery (COMMAND-R) partition and select in menu 4 disk utility.  Run disk utility > first aid > repair.

  Unrelated, but your battery has seen a lot of use.  I suggest to replace.

  Ciao.

• Responds very slowly. I get an error no longer - unresponsive Script / Message CAUSE: McAfee

  In the last week or so, my Thunderbird account began to go very slowly and displays a message at the top - is unresponsive.
  The program then hangs or I have to stop him going out.
  It worked well for the first two months, but for some reason that it started his.
  I'm not very computer and to my knowledge have not changed the settings on the computer.
  I used Mozilla since Netscape has been abandoned and did not have this kind of problem before. Firefox seems to work very well.
  Any help will be greatly appreciated.

  Sounds like a lot of McAfee antivirus

  See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #Solutions_for_Antivirus_Software

• Satellite Pro A10 with XP SP2 works very slowly

  I have a Satellite Pro A10; 256 RAM with 18 GB of HARD drive. (In think it was sold as a nominal 20GB).
  It's not particularly loaded with the software, even if the HD is about 90% full and is used primarily for surfing the Internet and word processing. It runs very slowly and has been making slower and slower.

  Click on an item oin the Start Menu, for example to open IE and takes literally 10 to 20 minutes to open the window under construction very slowly... really!

  I have Norton Internet Security and Norton System Works and the different uses do not find anything wrong, they report. Speed disk to run after a month, but also the system scans for viruses.

  I'm going back to the top upgrade RAM 1024 and also believe that a BIOS update is available but do not know how this will change the performance, or not at all.

  I know there must be other things I need to do to improve the speed. It is virtually unusable at the moment.

  What tests can I do to pin point problems and then how can I fix?

  Hello

  In recent years, I've used the Norton Internet Security and I was not satisfied. The point is that it is a good security tool, but it significantly slows down the performance of the computer laptop or computer. Now, I m using the freeware antivirus software called AntiVir.

  I see your computer laptop support only 256 MB of RAM. It is certainly not sufficient to use the Win XP smoothly.
  Other reasons could be overloaded HDD.

  Due to the low value of RAM, the laptop uses the area on the HARD disk for paging. Paging is an important part of virtual memory. It allows to use the HARD drive for data that does not fit in physical RAM.

  All of these are responsible by the performance of your laptop.

  By the way; It is perhaps also a time for a new installation of the OS.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• iOS 9 runs very slowly

  Hello

  I have a problem with my iPhone 5 since I have updated to iOS 9 and later versions.
  The software runs very slowly unlike iOS 8.4.1. What can I do?

  Is it possible to recover the 8.4.1 iOS?
  And if not, how can I do to run faster?

  Thanks for your help!

  -Frezzo1

  Sorry decommissioning is not supported by Apple.

  Basic troubleshooting tips are:

  Reboot, reset, restore from a backup and restore as a new.

• VI runs very slowly

  Hello world

  I hope you all have a good week.  I know that it's so suddenly in the water at my zip code and ask for help, but the truth is that I am a novice LabViewer and as community, this forum might be able to help me or point me in the right direction, way less time it would have taken me my own.  So enough of this and down to the fun stuff:

  Goal: 1. in a broad sense, I want to read in about 10-20 minutes of data sampled at 30 kHz to the PDM format.  There are 5 channels in total.

  1. filtering data with high and low filters not of all 5 channels channels.

  1B. take the standard deviation of the first segment of each of the five channels of data and divide each piece read in by gap to normalize.

  1 C add the first three channels together to increase the signal to noise & find places of pic

  1 d. use these places of pic and enter the amplitudes of tip on five channels and write to a text file

  1E. Finally, when data now stored as a text file for current and future use, track and analyze information of peak amplitude.

  The attempt:
  

  As you can see, I have attached two files, Calibration_Routine, which calls find_peaks.  The idea is that the Calibration routine, opens the DDHN file, reads in a data block at a time (750 000 lines both before of errors), forwards the data to search for peaks, which as its name suggests, detects peaks and delivers them to Calibration_Routine so that they can be written to a text file.

  The problem:

  So far the code seems to work fine but get up to about 4.5 million lines will read and then goes incredibly slowly but without producing errors.

  I ask on your part:

  As a newbie to LabView, I understand that there are probably plenty of room for my code optimization.  My suspicion is that there are some hidden buffer which is filled and clutter up the whole routine.

  1. How can I go to investigate memory problems?

  2. in a general sense, is there a better way to re - write my code?

  3. If, and I know it's a stretch, but if you see any obvious problems with my code, what are these and could you pointing me to some resources so that I can fix it?

  As I post this, my goal is to work my way through this document:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/vi_execution_speed/

  I hope that between the graceful help from members here, and my own slow but steady reading, I can get this thing to work.

  I really appreciate your time to even look at my post.  All the best,

  -Joe

  Update:

  I understand the reason why it was cluttering.  I tried to convert my dynamic data (blue wire) in a table inside a loop.  Once I put it inside outside of a loop of the VI can get through 20 minutes of data in a few minutes.  Not too bad IMO.

  The downside, it is write data in a way that I didn't expect, but at least this part can be tested now if there is interest I can re-post the fixed code.

• HP 15 laptop: running very slowly

  Laptop is running very slowly since the day I bought it. Crash games, flash player crashes several times per day.

  I called HP support before and they took over my computer by remote access. They scanned with Malwarebytes and CCcleaner. It does not yet compare with the speed of my old Toshiba with Windows 7, as I earn 8.1 installed on my HP. It takes six or seven seconds to get to a new site when you surf, my videos are constantly trolling and slow reading.  I do not have a lot of game and especially surfing.

  Any other suggestions?