Loading and removing responsible

Similar Questions

• How to load and remove the iPod nano podcasts

  Since the new 12.4.0 iTunes I am unable to load new podcasts or remove the "old" iPod nano...

  I am able to delete podcasts played in my library, but there are some podcasts I want to keep (This American Life, etc.), even if I listened to them. However, with the new version of iTunes, they played podcasts seem to be automatically loaded on my Nano, even if I manually manage my content AND have said to delete played podcasts from the nano.

  Help! It is a very frustrating version of iTunes.

• IPad 2 slow to load and removes programs

  I have an iPad 2, 4-5 years old, slow to load programs and falls frequently. Is it time for a new pad or a problem?

  My models of iPad 2 and 3 are running just fine and dandy on the last iOS 9.2.1.

  So the questions is not affects all former iPad users anywhere in the world.

  What free data storage space is left on your iPad?

  Ideally, your iPad needs to maintain a minimum free data storage space of 3-6 GB of space for reliable operation and ensure the possibility of update/update successful iOS.

  If you get low on iPad for free space, then it is time to back up important data before deciiding what to remove from your iPad to make more free space on it.

  How did you perform the upgrade?

  Do the update/upgrade using WiFi is a less reliable method to upgrade.

  It is better to upgrade an iDevice connected to a computer running iTunes with you sync iDevice had and backed up by iTunes rather than OTA Over The Air () using a wireless WiFi connection, if possible. Doing a major or critical OS update/update may be risky to do in Wifi or cell due to the risk of interruption of data or forged data, causing problems with downloading the OS data and the subsequent installation of the unit.

  If you have no other choice than to use the Wifi, then make sure that you have a solid and stable connection the will of the signal does not induce the possibility of dropout data. Also, it is best to do the update/update via iTunes you will get the update/upgrade entire and not only a smaller WiFi download version/serving based on your iDevice to model that can or can not download everything that your particular iDevice needs. I prefer the iTunes method because there is minimal risk, and I've never had PROBLEMS with ANY operating system, updates using this method.

  Here's my growing list of my possible corrections/suggestions to try on your iPad.

  Try them all.

  A disclaimer clause.
  

  I make no warranty, express or implied, that my own procedures return EACH older iPad to a usable state, running.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.

  If you use Safari, these features may be in the application settings under Safari.

  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.

  Try changing / using web browser third another, different.

  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.

  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.

  This is found in the application of settings in the general tab, in the left panel.

  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".

  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  In the application settings, under the Panel of Safari, turn off / disable Safari Suggestions.

  If you are willing to do (I, personally, would not recommend this), some users have reported that turn off find my phone/iPad, in the settings app in iCloud, has improved the performance of iOS, although I have no how this feature could be the cause of such a slowdown in execution, unless it's a bug in the iOS which only affects some iPad users.

  Try an another hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• I clicked on the source page and remove nodes with the web developer and removal became permanent. EBay does not load pictures. How to fix?

  The problem is on my desktop and my laptop. I got a little happy click on my desktop and click the Web Developer. I tried to remove an ad really annoying flash on the side of the screen. I think I entered in the source page and remove the node. I really don't know what happened, but stopped loading for ebay pictures and everything is a list written on the side of the page. I deleted the cache and cookies. I have reset mozilla. I uninstalled and reinstalled mozilla. Laptop is not immediately affected, but now having the same problem.

  It is a very strange problem.
  
  Any changes made with the web developer tool will save and should be cleared when the page is reloaded.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? The report please come back shortly.

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Hello. I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove my hard drive and reload the operating

  Hello.

  I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove from my hard drive and reload the operating system with all the updates and load to the top of my existing software. All my software works except my Photoshop CS3, which I use most. I loaded the software disc and download online. The system of charge very well and activation is complete.  Here are the main things that don't work properly, I have noticed so far. First of all, I can't open my camera RAW (I can with my Lightroom software, but not with my Photoshop software?). So I can't open any of my files of digital camera? Second, I can open a .jpeg file and use the Photoshop software and I can save the changes, but when I turn off my calculated the software doesn't seem to be on my computer. When I go to Windows ' search program and files "software is not located here. When I go to "Uninstall" the software of the foldername is there it is. "Photoshop CS3" but there isn't any size file to it IE 400 MB, while my software "Lightroom" on the 'uninstall' section will have a file for example size 400 MB tied to it. Thirdly, I also have a photosoftware of B + W, which operated in Photoshop; It's "NIK software - Silver Efex Pro" and it is located in the subtitle of 'filter' of Photoshop CS3. I use Silver Efex and all functions are working properly, but I can't save the file, it does not save the changes to save.

  Please can you help me.

  Thank you.

  KEith

  Try the forum for Photoshop.

• How to test and remove the loader object?

  Hello

  I am trying to load an object swfLoader on the scene and vimeo player (which I do with great success) and then delete them when I click on a button. I can remove it each separately, but when I put them in the same function I get an error. I think I need to test to see if they are on the stage with an if statement before I try to remove them, because I am getting an error NULL when I click the button. The problem is that I don't know how to test for them. I got as far to put the name of the variable in the condition. Can someone help me please?

  In an effort to keep the code as simple as possible, I do not understand the code where variables are declared and the swf loader and loader vimeo are instantiated on the stage. But if I need more for the problem to make sense, please let me know rather than pass on my request for help.

  Thank you.

  closePortfolio_but.addEventListener (MouseEvent.CLICK, onClickClose)

  function onClickClose (e:MouseEvent) {}

  If {(moogaloop)

  moogaloop.parent.removeChild (moogaloop);

       }

  If (swfLoader) {}

  swfLoader.parent.removeChild (swfLoader);

       }

  }

  closePortfolio_but.addEventListener (MouseEvent.CLICK, onClickClose)

  function onClickClose (e:MouseEvent)

  {

  moogaloop.parent.removeChild (moogaloop);

  swfLoader.parent.removeChild (swfLoader);

  }

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Try starting with the ALT key down.  It waits for you to choose a library to open it.  If it does not open your library then there is something wrong with the library.

  Try running after have connected you to your computer under another account if it works, there is something wrong with the configuration of your account

  Try to remove and then reinstall iMovie

  Geoff.

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• XP is unable to complete the loading and the power of travel.

  XP is unable to complete the loading and the power of travel. It will restart in Mode safe with no problems and then restart to normal safe mode. All programs and everything seem to work OK. CHKDSK/r was run from the installation disk and indicates disk errors have been corrected. Restart the hibernation or standby also works. Ntbtlog.txt is still crushed by the boot of good last and there is no help. It's very long and repeat the load lines and has-no-charge several times! Any ideas what to watch?

  I have lived with this for a few months and reinstalled XP and then new service Pack 3. Nothing done until this difference

  Hmmm...

  NVIDIA drivers are definitely outdated.

  If the system just stops (literally goes off), I suppose a marginal connection inside, an out-of-date driver or a heat problem.

  You can carefully and without requiring too much force, remove one reinstall all you cable and connection inside including your RAM and all other devices installed just do one thing at the time, so you don't mix.  One thing at a time... Unplug it and plug it in again.

  If she runs in Mode safe, your it would mean that the system uses the default XP video drivers (that is why everything is so GREAT in Mode safe).

  When you start normally and will charge drivers NVIDIA, things will run more hot.  Will increase the time on the CPU and video card.  Make sure that all your fans are running, and the system is properly ventilated and ventilated.

  If the CPU or processor on the video card is a problem of heat it just stop - no warning, no newspaper, no nothing.  Cool that turned off for awhile and it could work again for a bit.

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  You must be on the 275.33 version and you are now on 178.13 (from you given msinfo).

  6.14.11.7813 driver version<---- nvidia="" version="" 178.13="" from="">

  Your msinfo32, video section should look like this when you are finished:

  6.14.12.7533 driver version<--- the="" latest="" nvidia="" version="">

• I was told that I have a keylogger. How can I find and remove?

  My WOW account has been hacked. I was told that I have a keylogger. Ive has run antivirus and ad-aware and spybot scans. I have reset my account password and it happened again five hours later. How can I find the keylogger?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• at the start of geta pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you uninstall and reinstall download System Manager and check if the problem is resolved. See the article mentioned below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista - I recently updated my free dongle and now its loaded and saved with a mistake,

  Original title: salvation

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hello. Please download this free uninstaller.
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and remove the software and reinstall and check.