First pro CC 'Replace with after effect Composition' DNG AKA ACCOUNT number cinema

Similar Questions

• using first pro and replace with after effects composition

  Hi I am using pro CS4 first.

  I created a sequence of camera multi 2 cameras, on a separate strain. When I'm going to replace the images of timeline with an effect after composition, after effects starts, but what I get is the film in after effects is the exact duration camera.

  What can I do to prevent the exact footage of each of the cameras on the time line

  Thank you

  Rodney

  I don't think it's at all possible. It may be a limitation on multicam works. Because it does not really separating clips, there is no way for AE determine who is actually used currently. I guess, you would insert the relevant extract as a separate sequence to get this working...

  Mylenium

• "replace with after effects composition" option not available on the menu: adobe first cc

  Hello

  I use adobe first CC and CC aftermath

  I also have adobe first 2014 CC and after effects CC 2014

  on versions of 2014 I can open a clip as a composition of sequels and it will work simultaneously in both programs

  However, I stopped using the 2014 version when I had a problem with flickering on render (another thread)

  IM happy with the other version (No-2014), but I don't seem to have the same option to replace the clip with a comp consequences in this version

  anyone can shed some light on this?  Thank you

  Hi Matt,

  Ann is right in saying that Replace with Clip is not the same as the dynamic link. This option is Replace with After Effects Composition...

  Since no cutting is selected in the Project Bin, the Replace with Clip option is not highlighted. Select any item in the project Panel to enable the option.

  Replace with After Effects Composition is available in first Pro CC at the bottom of this Menu, which is in your screenshot.

  Thank you

  Regalo

• Replace with After Effects composition

  I am trying to move a clip in Premiere Pro to after sets by using Dynamic Link 'Replace with After Effects composition', when I do so it begins to After Effects and creates a new composition but does not move no matter what media Premiere Pro to After Effects at all. There is just a blank publication.

  Teodor salvation,

  Most of the time that this happens when versions of Premiere Pro and After Effects corresponding bad (works of dynamic link between the same two versions of applications). Make sure that Premiere Pro and After Effects have the same versions, for example, first Pro CC 2014.2 (8.2) and after effects CC 2014.2 (13.2)

  What versions of Premiere Pro and After Effects are installed on your computer? You can check this information under 'On first Pro', and ' After Effects'

  Thank you

  Regalo

• PP CS6 AE CC 2014 (replace with After Effects Composition)?

  Hey guys, been a user of CS6 for a little while now and do not require the full subscription of CC but really like working with AE. So I subscribed for membership of the single App CC AE 2014. I launch PP CS6 chop a few clips and send them to AE via replace after effects composition, and in turn, this dialog box appears saying 'the importer reported a generic error' and them's the brakes. I uninstalled AE CS6 because when to replace a clip with an AE Comp AE CS6 launches. These two programs are not talking to each other? As paralyzed.

  These two programs are not talking to each other? > Correct. As expected. Only the applications in the suite even talk to each other.

• "Replace with After Effects Composition" and cinema DNG

  This does not work - After Effects brings in only one frame.  Are there plans to fix this bug?

  This has been classified as a bug and is discussed in.

• Replace with After Effects Composition does not work in the first

  I get the message "the importer reported a generic error.  I tried it on clips without effects and normal rate 23.98, and it still does not work.  I installed CC cloud and it's a brand new IMac, so I am at a loss as to why it does not work.    For any help or suggestion would be greatly appreciated!  Thank you very much

  Don't use tracing with AE CC 2014.  It doesn't help.  It is preferable to use C4D Lite, which now comes with AE and is much better... and it does more.

• Replace the layer source footage with After Effects Composition

  Hello!

  I have a question about the workflow of dynamic linking between Premiere Pro and After Effects. As common for most editing workflows, I started by import and organize my source footage. I then cut the entire project using the original footage. Now, as he comes to effects and final optimizations, I noticed that there are several items that I need to work in After Effects.

  I know (and use) the function 'Replace with After Effects Composition', but this only works for an item in the Assembly. I have dozens of clips from same source footage and would simply replace the master-clip with a composition. In this way, I can do the AE-job once that overall the clip and the whole project remains perfectly organized.

  As I read elsewhere, there is no characteristic that makes this replacement directly. Trying to "Replace Footage" with one generates an AE-project error. After Effects render and replace the images with the rendered results (as advised in a similar topic) is no option, given that I'd lose dynamic links in this way. My question is: Y at - it another way or the workaround to replace my source footage of the layer with an After Effects composition?

  Thanks in advance for the help and advice!
  Best regards

  What you can get in the way you want.  Your best option is to export a new clip of the AE and use it to a replace operation in the tray.

  In the future, as a Pseudo-solution you can put the 'AE' in their own, dedicated footage clips and change using these sequences, as if they were real clips.  This would allow you to keep the dynamic link in place.

• Rough Cut created as a prelude with transitions, sent to first Pro works then, using 'replace with After Effects comp', loses the transitions. Why?

  With the help of Creative Cloud 2015 apps exclusively on a 64-bit win 8.1 Pro Gigabyte MB 8 core AMD pcu with 16 GB of ram and nVidia GeForce 8800 GTX graphics card. I deleted all the cache and restarted.

  Created a simple Rough Cut in prelude routinely using H.264 in mp4 video and still photos from format of (via Media Encoder) components ingested in prelude ~

  Rough Cut, composed of a sequence of 1 always followed by 4 x 3 second mp4 followed by another still followed by 4 more 3 second MP4, total length of 30 seconds.

  Together, then the default prelude "Cross dissolve" transition between each item in the first edit.

  Successfully sent this first edit in Premiere Pro using the menu option integrated prelude - send to first.

  Works like a charm in Premiere Pro, including cross-fade transitions.

  HOWEVER, now, in Premiere Pro, have not been able to use then 'Replace with After Effects' option under ' Dynamic Link ~ option is grayed out, regardless of how I select the element/sequence to replace. "

  The only way I have found to use all the options 'Replace with After Effects' is the one that appears when you right-click on a sequence in the timeline window, but when open in After Effects, crossfade effect has disappeared; Only the elements of the scene still show when parsing through the sequence in the timeline.

  After investigation, it turns out that the order of the individual elements that contribute, in the after effects project Panel, has been auto-réarrangés as assets to dissolve cross is now distributed among the other elements of the sequence and therefore cannot perform the intended function. It also destroys the fade in Premiere Pro effect that worked very well before attempting this 'Replace with After Effects' option.

  I need to find a way to keep this intact sequence in Premiere Pro and after Effecys and be able to use After Effects to add additional effects to this rough cut sequence...

  I have run the available tutorials in Adobe and Lynda.com and searched the forum for an explanation, but so far, nothing, I found has solved this problem. :

  1. How can I get the Adobe Dynamic Link to function when it is grayed out in the choice of Menu file?
  2. How to make the right click option 'replace with After Effects' to send the sequence in After Effects without changing its infrastructure, as described above?

  I await with confidence to find someone here who knows what I'm doing well wrung out! and who can show me the error of my ways. TIA. /PSB

  First transitions don't come in After Effects. They never have. Your workflow is not compatible with dynamic link. You should use AE to create shots and then change these shots in Premiere Pro. Trying to bring in a sequence which was finalized with effects and transitions is a losing proposition and not recommended.

• Is there an equivalent of Premiere Pro option - replace in After Effects?

  I just edited 30 second commercial using the direct link between After Effects and Premiere Pro to replace screenshots green thought with shots entirely composed of After Effects. Most of the time, I loved, and he saved a ton of time.

  But it would have been SO useful if I could have changed between versions of a particular move while now a direct link to the two versions. In other words, if they both could have lived in my sandbox first and I might have one option-dragged in the sequence to replace the other, which would have been great.

  I found that the current functionality of makes it very difficult to respond to the comments of customers. I like to keep several versions of the sequence I cut. But with the live links in place, any changes I make in the AE comp waving back, for my sequence three days ago is not my AE comps three days ago. He has rather my current versions of AE comps, with no way to keep a direct link to the old versions.

  So when the customer asked me to put something else as I got it, was VERY difficult to comply with this request.

  If I'm missing something and the functionality of the option-make slide exist, I would be very grateful for any suggestions on how to use.

  Thank you!

  I was never a fan of the workflow "replace by...» ». I would like to set up my After Effects project independently and then import them into first. When you do this, it asks you to choose the model to import. This way I can create several versions in AE and import in first as I want.

  When I want to work on a specific item in the first, I reveal in Explorer/Finder and then import it into AE.

  It's a more manual process, but it does really not a lot of time in practice and that gives me more control over the work flow and keeps things organized (I have one AE project contains all the links direct I need in first.)

  Edit: You can also copy a first clip and paste in AE. His first State function, it can stick in an existing model as the video, or it can stick as a precomp (to best preserve its creation parameters). I found stick it a little awkward, so I go full manual with the clip import into AE and paste timecode of first for entry/exit points.

• First Cs5.5 with after effects Composition Anti alaising?

  Hi, I'm editing with first CS5.5 and import a composition effects who possess titles of base in them and it seems not smooth at all. It looks pixelated or uneven. Here are a few screenshots:

  The sequence settings...

  

  Composition settings...

  

  Screenshoit of securities...

  

  Titles of the look fine to me.

  However, your AE comp is HDV (which means interlaced, UFF) and your sequence is progressive.  Ideally, they should match as well between them and your media.

• With the new El Capitan 10.11.1 Adobe first Pro CC 2015 and after effects Pro CC 2015 will run well?

  No problem with El Capitan's story with 10.11.1? I would like to update to Yosemite to 10.11.1

  No problem with El Capitan's story with 10.11.1? I would like to update to Yosemite to 10.11.1

  Hi Christian,

  Please stay on OS X 10.10 for now. We recommend an update for Premiere Pro yet, according to our product manager.

  Thank you

  Kevin

• First Pro Crash when importing After Effects project

  Hello

  Try importing a .aep project at first. The project itself is a simple color gradient to sit behind the text in the lower third of the screen. I tried importing dynamic links, as well as flat methods to import...

  First open rectangle import small file window (the one with the blue bar which usually zips along without delay) then crashes... you can then is no longer click Cancel or the x or anything else, it blocks simply himself.

  I tried this with various projects for AE and first, as well as creation of comps and empty and try again. Whenever this is the same accident.

  Uninstalled and reinstalled several times, still nothing. Erased from the memory cache for both applications.

  Anyone got any ideas or help with this?

  Thank you

  NVIDIA Quadro graphics card

  I7

  32 GB of ram.

  If the problem is solved by pressing the ALT key at startup, it is just an issue with corrupt preferences, and it was just a flip momentarily.

  Now that you have to reset the settings, it won't happen again.

  Kind regards

  Navdeep Pandey

• First Pro CC (but also after effects Photoshop cc, cc) crashes my computer

  Hi everyone, since a week I can't use any of these products. Simply, my computer crashes whenever I try to start a program.

  I get a BSOD with security check failure message from the kernel and it restarts automatically. When it starts, it takes a fairly long time, and it starts with a black screen.

  Check the virus, system, with nothing errors does not. All my drivers are up to date.
  

  I have Windows 8.1, Intel (r) Core i7-4510U @ 2 GHz

  NVIDIA GeForceExperience GTX 850M

  Someone has the same problem?
  

  OK, maybe I found the solution. The issue seems related to the latest version of the Geforce driver. Just installed the patch and everything seems to work fine now

  Driver GeForce HotFix 361,60

  I'll do some tests more

• How to export files video first Pro CC 2015 according to Effects CS6?

  The choice of dynamic link in the file menu is grayed and I can't replace with After Effects Composition when I right click on the video file in the time line.

  Dynamic Link only excist between applications of the same version.

  You need to export with a mid-range codec if you want to use CS6, otherwise install AE2015.