First time user needs help

Similar Questions

• can trial Photoshop CS6 - I access it as a first time user?

  I downloaded the Photoshop CS6 trial on my iMac as a first time user, knowing that my serial number for CS1 was outdated (I am retired and have not used Photoshop for years). But I can't activate it. It is not available for novice users and if not, how can I safely uninstall? I really want to try before you buy the full version and did not know that I need a serial number to install.

  You don't need a serial number for trielas. If it has expired, something was wrong.

  Adobe trial software has expired at the beginning

  Uninstall using the uninstall program supplied with the program.

  Mylenium

• Former Nikon user needs help w / AF on a 5 d MK I

  I bought a used 5 d MK I and new EF 24-105mm f / 4L and I'm having problems with the autofocus. I shot a test subject to 16 feet of focal plane (used a tape measure), but moved Center AF point focal beyond the mark of 20 ft on the lens. I was shooting 50mm at f5.6 so sharpness was ok, but really sweet because the subject was on the near end of the focal length range. When I shoot wide open at distances more close photos are unusable. Any ideas on that? What I need to send to Canon for repair, or is this a known problem with this model of body? I shot Nikon for 20 years, so I'm totally out of my element here; I could not yet understand how to use the self-timer for family vacation photos. Any help for a beginner user of Canon is appreciated!

  Thanks for the reply! I pulled the manual on the web when I got the camera and think I have everything set up correctly.

  What I really need help, is if there is a known issue with AF on the 1 5 or if I use the wrong settings. I'm really just trying to determine if I need to send the body of the camera, lens or two to Canon for repair, or if I would be wasting my money doing so.

  My test subject was 16 feet more distance, but the camera and lens determined she was 20 feet away. The camera was tripod mounted with IS off, Av mode, ISO 800 set at f5.6, 50mm, I Focus mode AF and the central focus point square on the nose of subjects. I used flash ettl and unfortunately I can't remember what was the shutter speed, but I can remove it from the EXIF if it's important. Development was strong at about 5 feet behind the subject.

  The questions remain the same with or without UV filter on the lens. AF seems pretty good for macro up to about 10 feet away, then it seems to be far away. Is this a limitation of the AF system on this unit or could be improved spend the money to have the Canon watch? Or I'm better this unloading at KEH and get another camera?

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

• First time user: how to open the disk drive?

  I tried to open the disk drive and I need help on howq to open it?

  Based on the specifications of your laptop HP 15-f009wm, this model is a CD/DVD drive. The reason for which you cannot find or open the disc drive, is because it is not a. You can buy an external USB CD/DVD drive if you require the use of a CD/DVD drive.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• What is the best product for a first time user of WORD PRESS to design a web page of writing-blogging?

  What is the best Acrobat product for a first time web page or blog page - very technical designer - to design a place to show the writing and blogging information?

  You can use these options for WP blog in Muse:

  http://musewidgets.com/search?q=WordPress

  Thank you

  Sanjit

• Airplane mode button does not. Any help, please? First time user dell.

  Hello

  I recently bought a dell inspiron 15 laptop computer series 7000. Its only for a month that I used it. Everything was fine, but my mode button (the button beside F12 and PrtScr well-functioning) plane has stopped working. Any help? All other buttons on the touch line is fully functional, so I'm afraid this isn't a problem of matrix keyboard?

  Please help me.

  Hi I got your issue, there is a button on your keyboard that resembles a wifi Tower press this button and it will allow you to disable flight mode, good luck my friend

• High power user, need help!

  Hello

  I'm a long-time mac user, so even though I know how to use pc and windows OS am nowhere near as competent as you guys.

  I am looking to buy a new laptop, but have high power requirements. I'm going to do a lot of 3d modeling & made as well as the use of photoshop files.

  Can help guys point me in the direction of a computer good dell laptop. I'm not the biggest fan of the envelope of xps and would rather something of the dell precision range Sylvie that this is certainly not a decisive factor.

  As mentioned that it will be used a lot so I need something that can really take what I throw at it.

  An important factor will be what windows operating system to run with. I was not too impressed by what I've seen of Vista but do not know much. Should I try and run Windows xp or vista uped has it's game?

  Screen size wise I don't mind past for 15.4 "instead of 17" as could always get an external monitor to sit with him.

  Help, please

  Stephen

  
  

• new user needing help

  Hello world.

  IM new to this so please be gentle. I have a motorola milestone (1 week) on orange. I had to get orange to set the phone so I can get on the internet.since this is a screen of motorcycle car always comes when I press the home button. Any ideas that it is and how to stop the it.also I can't disconnect from the internet, unless I turn off the phone. I also have a htc phone and it simple to turn off the internet but cant seem to find anyway to do this on the milestone.

  any help that anyone can provide will be much appreciated

  The Milestone is intended to be a 'cloud' device and therefore will be always connected to the internet (if you have the settings configured properly) unless you use an application that disables voluntarily for you. In general, it just means that any application that needs to connect can, without asking, and e-mail can be collected - again without notice to you. If you are on a package data unlimited so this isn't usually a problem.

  If you really want to "disable internet" then something like APNDroidworks by activating / disabling your internet settings between known States, good and bad. For the user what that means is that you have a button that you can put on a home screen that will switch your internet enabled or disabled.

  I don't know what OrangeWorld is or is - that you just want to say that when you start your browser you end up on a page called OrangeWorld? If so, is it as simple Orange to configure your browser so that the homepage is OrangeWorld?

  As for your home main problem is weird. I assume you mean the key 'home' of material and not a button on one of your home screens? As someone has said, the only ways, you should see the car home are either by the presence of a magnet near the rear of the case or by running the application of the "motorola car home."

  If you use a carrying case for your phone, make sure it does not use a magnet for keeping it closed, and if it is use a magnet to take the phone out of the case and try again by pressing the home button.

• Failed to open a session for the first time user. Already put in wifi before logon.

  Hello

  I have a problem on windows 7 wifi before logon. Am currently using windows 7 Enterprise, whenever I boot up to windows on the bottom screen there is a status wifi say "windows tries to connect wifi (my wifi profile).  While I am able to connect to my school network.

  When the new user try to connect it is able to identify and prepare the new Office BUT when 2nd user login or 3rd I'm having a problem. Windows will not be able to connect and it showed the error "'no connection servers available at the service ofthe logon" "

  Know any solution for that?

  Rgds,
  Dan

  Hi Dan,.

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• My USB 3.0 internal card reader SD and bus have both work to quit at the same time. Need help in restoring

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. Buses from USB 3.0 and player appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the USB 3.0 Bus and drive? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  
  

  OS X Yosemite: If a USB device does not work

• Windows 7 service pack 1 for 64 home basic system refuses to download. Never went from 0% installed. Tried more than 10 times. Need help.

  See tittle for the description of the problem.  Why can you give us a service pack that some many people have trouble installing?  Its stupid.  Wasted my time and yours.  Please help with this and post the fix so that others don't have to go through this same process.

  Thank you
  Jeff

  Hello Wookie312,

  Thanks for your post.  Please follow the troubleshooting steps below and let us know the results of each utility.

  1. download / install and run the tool update system - CheckSur.  You can download the tool from the link below.

  Download the tool update system (64-bit)

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  We can't wait to hear back on your part.

  See you soon

• A2107A new user needs help with a new media player

  Hi please can anyone suggest a good player to install on my Ideapad A2107A as a built-in custom plays several popular formats such as MKV and some others.i have installed free VLC Player, but I use potplayer on my PC which is excellent and will play all formats, I need... only it is not listed in the application listed , but only "DAUM" is (responsible for the coding of potplayer) I need to use the player in the Portugal where access to broadband is not very good... I'm going on vacation that's why I bought my Lenovo... Thanks a lot for all the help on this topic

  Hi, adrian631330

  Welcome to Lenovo community Fourms!

  I think you can see this Post.

  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/A1-the-best-video-players/m-p/648187/highl...

  You might just find the right App for you!

  Hope this helps,

• Using two buttons market timer / stop, need help please.

  Hey everybody.

  I am stil working on my project, and now I'm trying to implement a timer using two buttons market / stop. Everything I do now is when you press start the stopwatch starts and when you press stop I want the timer to stop and display the time.

  Whats happening is when I press start, the timer starts, but when stop is pressed the timer displays a value of say 12 seconds, a second more later I press stop again a value of 14secs arise and it stops at 14.  Now, whenever I press on start it will start at 14 and repeat this process.

  So I think that somewhere, I did not put my right timer.

  Could someone say somethings that I should change in my code.

  They are declared at the top:

  static public boolean status=false;
  static public int count=0;
  static public Timer timer;
  

  Here is my code:

  ButtonField start = new ButtonField("Start",ButtonField.USE_ALL_WIDTH|                          ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                          start.setChangeListener(new Listener1());add(start);
  
  ButtonField stop = new ButtonField("Stop",ButtonField.USE_ALL_WIDTH|                            ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                            stop.setChangeListener(new Listener2());                          add(stop);          
  
              public class Listener2 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer is at" + Integer.toString(count));            status = false;            timer.cancel();            }            }
  
              public class Listener1 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer started");            status = true;                try                {                                                timer = new Timer();                                        timer.scheduleAtFixedRate(new StartEvent(),1,1000);                }                catch(Exception e)                {                //do nothing                }            }
  
      private class StartEvent extends TimerTask    {    public void run()       {        if(status = true)              {              count++;                        }        else            timer.cancel();//        count=0;    }    }    }
  

  any help is appreciated

  Thank you guys

  

  Probably best to follow just a matter of a Thread.  So next time, you can start a new Thread with a new question.  However, you should also search the forum before asking questions, that your two supplementary questions have been answered in other posts on this forum.

  Concerning your problem to press the stop and get another moment, I think that you must have application logic that disables the stop button once pressed, until you press the Start button.  For example, you could do by assigning to the time of departure - 1 in the Stop button, and then, when you press the Stop button, he can check the start time and displays a message saying "Timer not started" If the start time is - 1.  There are a number of other ways to do this, I described this method because it is easy to explain.  It is not really how I'd do.

  The best way to set the buttons next, is to add then to a HorizontalFieldManager, then add the HorizontalFieldManager to your screen.

  To stop the button displays the menu, you must set it with the style CONSUME_CLICK, for example:

  ButtonField stopButton = new ButtonField ("Stop", ButtonField.CONSUME_CLICK);

• First time user does not get created in ODSEE while commissioning, OIM11gr2

  Hi Experts,

  I use OIM 11 g 2 and available to the user in ODSEE. Even if the values are getting updated in the form of process (ContainerDN is also correct) the user is not created themselves in ODSEE. What may be the error. I followed following steps:

  Update map Factory(Compiled the code that is creating baseDN)

  Update the form of courses (added UDF, set the properties for the UDF, pre fill)

  Definition of process of update (update UDF_Name)

  Update lookup (Lookup.LDAP.UM.ProvAttrMap) with the UDF.

  Did I miss something?

  Help, please.

  Thank you.

  Yes your create user task is rejected. check again the mappings of attributes and configurations. like you said control of violation earlier object class configuration research.