Fitted with a different output device for different programs. TV HDMI (iplayer), Laptop speakers for a game (counterstrike) speakers?

Similar Questions

• my computer recently returned endlessly with no audio output device installed, I loose sound and can only get that back when coming back to a restore point, just went again without reason.

  My computer guard lost its audio, no device installed usual message, only started doing it in the last 6 weeks, can only get back using a previous restore point, went again this afternoon.

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Half of the programs begin with a different program

  Original title: Windows 7, half of my programs ONLY open in the photo gallery, BUT the WORK didn't.      WHY  ???????????

  Most of my programs open with their default value. But half of my programs open with Photo Galley, HALF of them?  But the Gallery said: could not OPEN this file. I counted only 21 cases, or of icons on my desktop when I try to change the default to open these files. Then the 21 icons change, but STILL open with the PHOTO GALLERY. This here all I can do to make all files and Office Open?   Any help would be great!   Thank you, swimnut2003

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that some of the programs are open with Photo Gallery. I'll be happy to help you with your query.

  To resolve this issue, reset the registry subkey for the file association to the .exe on the default file.

  See the section: Windows Vista and Windows 7 (let me fix it myself)

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope the information is useful. Let us know the State of the question, we will be happy to help you further.

  Thank you.

• How to select the output device HDMI as audio playback for Windows Media Center device

  Output audio media center units

  Hello

  I'm trying to set up my media center from windows to windows media center of output through a separate audio device audio device by default.

  In this case, I have hdmi output that I want to be the output for windows media center and my realtek analog to be the default for all the rest.

  So my overall question is how I make windows media center requires is not the default audio device.

  Thank you

  Andrew

  Method 1 is useless. Does that change the audio device by default in the system, what the user seeks specifically not to do.

  Method 2 has no effect at all on Media Center.
  The answer seems to be no, Media Center only works with the audio output device by default.

• PC says no audio output device is installed

  original title: my pc is unable to play music, realtek is installed, it says no audio output device is installed

  my pc does not play music, realtek is installed, it says no audio output device is installed

  Hi taibie,

  Follow the troubleshooting steps in this thread to solve the problem with no audio output device installed.

  Let us know if that helps.

• My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

  Original title: Audio output device

  My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• HP dv6736nr no audio output device

  To make a long story short, my laptop is a hp dv6736nr and he says he has no audio output device installed and when I go into my speakers (Conexant High Definition SmartAudio 221) Device Manager is not under the sound, video and game controllers section and when I try to download the driver from hp , at it says cannot find the device to install the driver

  Try this:

  Go to control panel, sounds. On the Read tab, select your speakers on and click on the "Set as default" button below, click on the buttons apply then OK to exit. If it is already set as default, disable and re-enable it (right click). If you do not see your speakers, do a right click on a space empty on the box, clilck on "Show disabled devices" and "Show disconnected devices".

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Suggestion of a USB device for synchronization of a short Digital pulse with analogue output or periodic

  I hope someone can point me in the right direction and also to clarify some concepts!

  Background: I am currently using the box USB-6009 and labview on a laptop to output 2 analog waves. It acts as a waveform(0.5-2Hz) of speed (periodic) for an engine step by step (with a driver) to execute a loop of traffic, and the other waveform acts as a signal short 5V to trigger some imaging equipment. The ability to move or to delay the start time of the wave of 'trigger' compared to the waveform of speed in steps of hail (ms) became a requirement for my experiments. Given the time where the USB-6009 case, software based accuracy was not good enough because I need, and the way I wrote the VI limits my delay/travel at the speed of wave deltaT(30-40ms). I started to look at the USB - M series (portability is an obligation) since some have calendar based on the material, and I could send the signal to a buffer rather than iteratively having read every value of the wave in. It also seems that a digital short "pulse" works better than an analog wave form creating any. Where I ran into some confusion is to determine the requirements of a deterministic way sync the two. I am looking for new hardware. I started by looking at the box USB-6211. However, I ran across a few posts talking about the digital I/o correlated being required to perform vaguely similar configurations, which would require something more like the USB-6221. Since I have probably to the digital output to be on a time scale different analog output, is i/o digital correlated required? If not, would the 6211 work?

  Just to be clear, I need the periodic waveform and relaxation to be constantly in phase (anywhere, 10 minutes to several hours). Then be able to move the pulse +/-1ms (minimum) and repeat.  I can justify the most expensive device if necessary, but I don't want to get something I don't need.

  I have attached a figure (not not to scale) of what I am after, in the likely event that my explanation was not too clear.

  Thank you

  Gabe

  Hi Gabe,

  The 6211 did not buffer IO digital as some of our other devices.  However, there are two complete meters on the 6211 which can be used to perform a generation of pulses (pulse or continuous pulse train - you can output a pulse train using two counters finished).  You can take a look at the section Applications of meter output x 621 manual for more information.

  What it sounds like, the 6211 will do what you need for the following reasons:

  1. the AO of the 6211 lines are buffered and can be clocked up to 250 kHz per channel (in contrast to the 6009 using AO NI by SW).

  2 the 6211 counters can be used to generate two pulse based on a basis of time of 80 MHz (12.5 ns pulse width and resolution time).  The 6009 does not output meter.

  (a) if the two pulses must be on the same line, you must configure a task of generation of pulses finished' (this example uses two meters behind the scenes).

  (b) if both impulses are on separate lines, then you can use a task to counter separated for each line with a different initial delay.

  The 6211 does not supported clocked generation of digital signals (e.g. 100010101110100) but if you just need to generate impulses so that's precisely what the counters can be used to.  I think that's where all the confusion, but seems like the generation of digital signals should not be necessary for your application.  Trigger the counter outputs out of the trigger to start AO and adjusting the parameter 'Initial period' should give you what you are looking for.  Don't forget to start the tasks of meter in the software before the tasks of the AO (if they are armed and ready to go before the start AO is sent).

  I hope this helps, don't forget to post if you have any questions!

  Best regards

• How to acquire of various AI channels simultaneously with a different range for each of them?

  How to acquire of various AI channels simultaneously with a different range for each of them?

  In LabView, I found some examples but in C it is not seem to be any.

  Or you can add channels one by one with individual instructions: the follwing code compilation and runs without error on vitual DAQ hardware:

  ERR = DAQmxCreateTask ("", &taskH); ")
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai0', 'AI0', DAQmx_Val_Cfg_Default,-5,0, 5.0, DAQmx_Val_Volts, "");
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai1', 'AI1', DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, "");
  
  DAQmxStartTask (taskH);
  
  ERR = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, & read, 0);
  
  DAQmxClearTask (taskH);
  
  

• Account Hotmail receives emails intended for another (not MSN) account with a different name.

  Original title: receive emails to another account.

  My hotmail account receives emails to another account (not MSN) with a different (but similar) name.

  Hi RalphieE,

  In dealing with the problem with the Hotmail account, I recommend you ask your question in the support forum for Windows Live Hotmail to help.

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  
  Reference: Windows Live Hotmail Top issues and Support information

  Hope the helps of information.

• Why do I get emails intended for person with completely different e-mail address?

  Why do I get emails intended for person with completely different e-mail address? some of the Emails are addressed to names nowhere near the same spelling to my address and I always get them

  You CAN receive email if your email is added to the BCC list [1].

  Most spammers use this medium to spam others.

  [1] http://en.wikipedia.org/wiki/Blind_carbon_copy

  See you soon!

• Urgent: account with a different name for the wire transfer of payment portathon?

  Please help me. I did three apps in last out portathon that is approved and review of the other two is underway.

  Today, I got a Blackberry e-mail form that includes a link to enter data for transfer of my reward. The name on my bank account is slightly different the name with which I am registered as a supplier.

  Can I enter this slightly different name on this page with my bank details wire transfer and get my payment?

  Use the bank details of others to get the payment?

  Please answer quickly. It is urgent that there is no detail on the date deadline for submitting the details.

  Yes, you can use the bank account with a different name.

• Download photoshop for free twice on the same computer with a different account?

  Download photoshop for free twice on the same computer with a different account?

  No, you can use the trial only once on a single computer.

  Concerning

  Hervé Khare

• Hi, I just bought Photoshop. My main use is going to be where I have the color a series of Articles with the same colors. For example, I have 10 pictures of stamps, which are in different shades of orange and turquoise. I want to choose a shade of orange

  Hi, I have a specific use for Photoship. I have 10 pictures of stamps, each with a different shade of orange and turquoise. I chose 1 pair of glasses and I want other photos in 9 stamp with these shades of color. How do I do that?

  Simon

  Take a look to replace and match colors

  Using Photoshop | Match, replace, and mix colors

• How can I create a new master page with a different set of pages for the menu bar?

  I want to create a new Master Page that could be used for a different set of pages with a different menu pointing to other pages...

  For example:

  Master A to include a menu for pages:

  Page 1, Page 2, Page 3,

  Master B to the guests for the pages menu:

  Page 1, Page 4, Page 5...

  Maybe I would also do Master C and D with a bar of menus different total...

  But how can I isolate the menu bar from the rest of the pages that I don't want it?

  Right click on this page that you want to isolate > menu goto option > exclude from the menu.

  Hope It could help.