Packard bell easynote you 11hc on custom windows 7 activate WiFi even after pressing f3

Similar Questions

• Packard Bell Easynote laptop computer CD Rom problem in Vista

  I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?

  Russ

  Hello

  Close all programs and then put in a DVD - RW blank = what happens?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Packard Bell EasyNote SJ51 coprocessor driver is missing

  Hello world

  I've updated this laptop Packard Bell EasyNote SJ51, with native Windows Vista Basic, Windows 7 Ultimate.
  After installation clean smooth found WU driver VGA that apparently has not been incorporated in the W7U so that I had to download synaptic drivers on mine.
  So great that I decided to glorify it with a memory upgrade buying little extra RAM.
  I've used Speccy to search for details and then realized that the temperature is too high. (70/80 ° C)
  Once activated the materiel management tool, I discovered that the coprocessor driver is missing... so I ran windows research pilot of this Panel, the OS invites you to visit the Web site of the manufacturer I did but I couldn't really find anything related to this laptop.
  Even on the site Web of NVIDIA.
  No idea where should I look for him safely?
  Thanks in advance for your help.
  Information on the mobo:
  Motherboard

  Manufacturer PACKARD BELL BV

  Model EasyNote_SJ51 (Socket A)

  Version PB96F104A7

  NVIDIA Chipset provider

  Model of chipset nForce 560

  Chipset revision A2

  Southbridge NVIDIA provider

  Model of Southbridge nForce 560

  Southbridge revision A2

  System of temperature 70 ° c.

  BIOS

  Brand Phoenix Technologies Ltd.

  Version 1.0 H-3221-0010

  Day 12/03/2008

  ICP data

  PCI slot

  Type of PCI slot

  Use of the available slot

  Bus width 32-bit

  PCI Slot 1 slot designation

  Slot number 0

  PCI slot

  Type of PCI slot

  Use of the available slot

  Bus width 32-bit

  PCI Slot 2 slot designation

  Slot number 1
  Details of the CPU
  CENTRAL PROCESSING UNIT

  AMD Turion 64 Mobile TK-57

  Carrots 2

  NET 2

  Name AMD Turion 64 Mobile TK-57

  Codename Tyler

  Package of Socket S1 (638)

  65nm technology

  Specification of the AMD Athlon (TM) 64 X 2 Dual - Core TK-57 processor

  Family F

  Extended family F

  Model 8

  Model expanded to 68

  Stepping 2

  Instructions (+) MMX, 3DNow! (+), SSE, SSE2, SSE3, AMD 64

  Virtualization Supportato, disabled

  Hyperthreading unsupported

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Stock of basic speed 1900 MHz

  Stock of 200 MHz Bus speed

  Average temperature of 74 ° C

  Caches

  L1 Data Cache Size 2 x 64 KB

  L1 Instructions Cache Size 2 x 64 KB

  L2 unified Cache Size 2 x 256 KB

  Core 0

  Basic speed 1903,0 MHz

  Multiplier x 9.5

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Temperature of 73 ° c.

  Thread 1

  APIC ID 0

  Base 1

  Basic speed 1903,0 MHz

  Multiplier x 9.5

  200.3 MHz bus speed

  801,4 MHz rated Bus speed

  Temperature of 75 ° c.

  Thread 1

  APIC ID 1
  IlConteMascetti

  Hello

  I installed the

  15.23_nforce_winvista32_international_whql

  found on NVidia U.S. and looks that the coprocessor driver was finally installed.

  Greetings

  IlConteMascetti

• Packard Bell EasyNote ENTG71BM Ram Upgrade

  Hello.

  I got a new packard bell easyNote laptop computer ENTG71BM. This one has 2 GB of ram and windows 8.1 so ram is not enough. Can I remove the backcase and install another 2 GB of ram? Is an empty slot available?

  First remove your image (full S/N and SNID said).

  PB ENTG71BM (8.1 - 64 bit Windows) has the same mothers like the Acer Aspire ES1-512.

  Your laptop supports up to 8 GB - DDR3L - 1600 MHz (1x8Gb).

  1 - the bars of origin are:

• FIX: "no mountable boot Volume' on Packard - Bell EasyNote A8

  Hello:

  I want that my recent experience would be helpful to my fellow users.

  My Packard - Bell EasyNote A8, running Windows XP Home, was to have a "Blue screen of death" problem very frustrating showing "One-Mountable boot Volume," at the start of the system, just after loading Windows XP logo, after a recent system total restore factory & all subsequent updates have been made. An extensive internet search was not much help. Physical damage to several sectors on the hard disk are likely, after all, there @ and 10,000 POH

  Solution:

  1. let regenerator HD program work for about 6 weeks continuously. I don't know how this has helped, it detected 100 many bad/damaged areas and repaired only 3. Had to manually stop because he was taking forever. He got stuck on 47118Mb, with @ 3Gb more to go.

  2 restart the computer. Press the magic F11 button.

  3. system restore started. It is automatically detected and repaired the damaged partition. Everything is automatic. Just sit back & relax & follow the prompts on the screen.

  4. my Packard - Bell EasyNote A8 now return works perfectly as it was before the problem started. All updates completed. No "blue screen of death" until now.

  E-mail address is removed from the privacy *.

  Hi M_Rafi,

  Follow the steps in this document to resolve your problem with unmountable boot volume.

• I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  Hi jcyho,

  Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• Packard Bell Easynote TK81 compatible motherboards

  Hi, I need compatible motherboard for Easynote TK81 - PEW96. I burned by the way the videochip and now we cannot find compatible motherboard. CPU is MAD Athlon II P360. Can you tell me MB compatible for this model of videochip? Thank you.

  Here are a few:

  http://www.eBay.com/Sch/i.html?_odkw=&_osacat=1244&_FROM=R40&_trksid=p2045573.M570.L1313&_nkw=Easyno...

• 4 SIMS will work on my PACKARD BELL EasyNote TM

  Hello

  Wondering if anyone could shed some light on this for me please...

  The sticker on my lap top says:

  4 GB of DDR3 memory

  AMD Athlon II X 2 P340 processor

  ATI Mobility Radeon HD 4250 graphics card

  HARD DRIVE 320 GB

  16.9 15.6 "HD LED LCD

  DVD-Super Multi DL Drive

  Windows 7

  AMD vision

  If you need any other information please let me know :)

  Thanks in advance!

  Hayley

  It looks like, if your processor is 2 GHz

  http://www.GameSpot.com/articles/the-Sims-4-PC-system-requirements-revealed/1100-6421318/

  PROCESSOR: 1.8 GHz Intel Core 2 Duo, AMD Athlon 64 Dual - Core 4000 + or equivalent (for computers using chipsets graphics integrated, the game requires 2.0 GHz Intel Core 2 Duo 2.0 GHz AMD Turion 64 X 2 TL-62 or equivalent)

• HP laptop - 15-ay013nr: after you have not installed Windows 7 no wifi

  Hello

  After I installed Windows 7 (I can't bear Windows 10) I han get wifi to work. I downloaded driver lasted for windows 10, but Im not even get to be shoq wireless hardware. Help, please. Cable internet connection works fine

  Hello:

  You need this card driver for the Intel Dual Band Wireless-AC 3165 802.11 wireless 1 x 1 WiFi adapter has your laptop.

  The 2nd driver down on the left side of the page is 64-bit.

  https://Downloadcenter.Intel.com/download/25835/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-?product=89450

• Windows security updates fail even after Fix It

  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)

  Update of security for Microsoft Office PowerPoint 2007 (KB982158)

  Updates has no error codes 663 and 8007066F

  Running MS Fix It regular and aggressive, restarting after each race.  Microsoft Security Essentials also disabled all to nothing does not.  Any suggestions are appreciated

  If still no joy and assuming that these are the ONLY updates do not install...

  See the section "How to get help", for example, http://support.microsoft.com/kb/2416447

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Save as window on the screen even after closing the program

  Original title: desktop problem
  How can I get rid of a file command such as save as that rest on my screen, if I still use when I get out the program that is on the desk

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. This is come up with a particular program?

  Check if the problem persists in the clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Corel Painter Essentials 4 will not open on my 64-bit Windows 7 Ultimate PC, even after trying all the previous versions of MS install modes. Any ideas?

  Don't know what else to add at this stage.   Does anyone know of a workaround or a fix?

  Hello, Lance Colvin.

  According to the Windows 7 Compatibility Center, Corel Painter Essentials 4 is compatible with 32-bit and 64-bit computers.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=painter&v=Corel&UID=4&l=en&pf=0&PI=0&s=Corel%27s%20Painter%20Essentials%204&OS=64-bit

  Do not have Adobe® Acrobat® Reader installed >

  I suggest you post in the discussion of Corel Corel painters Essentials 4 group.
  http://Essentialscafe.com/forums/49.aspx

  They would be more apt to help with their software.

  Sincerely,.

  Marilyn

• Update of Windows KB2810048 loops continuously even after success

  I get the Golden Shield which means an update over and over again for KB2810048 - an update of security for Excel 2003. Whenever the update is successful and yet I get it again and again. Here is a screenshot of the update history:

  Help, please.

  There is already a lengthy discussion on the problem of update of repetition in this topic. You should read and keep it looking for information. It is easier for the Mods to handle if there is a central topic with the latest news being posted there.

  No official fix has yet been made public but the recommended solutions are to hide the updates or delete the.

  Thank you

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich