Packard Bell EasyNote SJ51 coprocessor driver is missing

Similar Questions

• Packard Bell Easynote laptop computer CD Rom problem in Vista

  I have a Packard Bell Easynote laptop computer and the CD rom does not recognize my DVD - RW drive, it recognizes and plays all other formats, any ideas how to solve this problem?

  Russ

  Hello

  Close all programs and then put in a DVD - RW blank = what happens?

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD/DVDs have a tolerance + - and may your reading/reading on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Packard Bell EasyNote ENTG71BM Ram Upgrade

  Hello.

  I got a new packard bell easyNote laptop computer ENTG71BM. This one has 2 GB of ram and windows 8.1 so ram is not enough. Can I remove the backcase and install another 2 GB of ram? Is an empty slot available?

  First remove your image (full S/N and SNID said).

  PB ENTG71BM (8.1 - 64 bit Windows) has the same mothers like the Acer Aspire ES1-512.

  Your laptop supports up to 8 GB - DDR3L - 1600 MHz (1x8Gb).

  1 - the bars of origin are:

• FIX: "no mountable boot Volume' on Packard - Bell EasyNote A8

  Hello:

  I want that my recent experience would be helpful to my fellow users.

  My Packard - Bell EasyNote A8, running Windows XP Home, was to have a "Blue screen of death" problem very frustrating showing "One-Mountable boot Volume," at the start of the system, just after loading Windows XP logo, after a recent system total restore factory & all subsequent updates have been made. An extensive internet search was not much help. Physical damage to several sectors on the hard disk are likely, after all, there @ and 10,000 POH

  Solution:

  1. let regenerator HD program work for about 6 weeks continuously. I don't know how this has helped, it detected 100 many bad/damaged areas and repaired only 3. Had to manually stop because he was taking forever. He got stuck on 47118Mb, with @ 3Gb more to go.

  2 restart the computer. Press the magic F11 button.

  3. system restore started. It is automatically detected and repaired the damaged partition. Everything is automatic. Just sit back & relax & follow the prompts on the screen.

  4. my Packard - Bell EasyNote A8 now return works perfectly as it was before the problem started. All updates completed. No "blue screen of death" until now.

  E-mail address is removed from the privacy *.

  Hi M_Rafi,

  Follow the steps in this document to resolve your problem with unmountable boot volume.

• Packard Bell Easynote TK81 compatible motherboards

  Hi, I need compatible motherboard for Easynote TK81 - PEW96. I burned by the way the videochip and now we cannot find compatible motherboard. CPU is MAD Athlon II P360. Can you tell me MB compatible for this model of videochip? Thank you.

  Here are a few:

  http://www.eBay.com/Sch/i.html?_odkw=&_osacat=1244&_FROM=R40&_trksid=p2045573.M570.L1313&_nkw=Easyno...

• 4 SIMS will work on my PACKARD BELL EasyNote TM

  Hello

  Wondering if anyone could shed some light on this for me please...

  The sticker on my lap top says:

  4 GB of DDR3 memory

  AMD Athlon II X 2 P340 processor

  ATI Mobility Radeon HD 4250 graphics card

  HARD DRIVE 320 GB

  16.9 15.6 "HD LED LCD

  DVD-Super Multi DL Drive

  Windows 7

  AMD vision

  If you need any other information please let me know :)

  Thanks in advance!

  Hayley

  It looks like, if your processor is 2 GHz

  http://www.GameSpot.com/articles/the-Sims-4-PC-system-requirements-revealed/1100-6421318/

  PROCESSOR: 1.8 GHz Intel Core 2 Duo, AMD Athlon 64 Dual - Core 4000 + or equivalent (for computers using chipsets graphics integrated, the game requires 2.0 GHz Intel Core 2 Duo 2.0 GHz AMD Turion 64 X 2 TL-62 or equivalent)

• Packard bell easynote you 11hc on custom windows 7 activate WiFi even after pressing f3

  Well, it's bad for me because I do a lot on the internet and it started today. And are not sitting well you should try pressing Fn + F3 because that's what I do when I need to use it because my laptop has a weird keyboard and I reinstalled my drivers and still nothing nothing has helped even from support.

  If you haven't already done so, try to run the network troubleshooters (esp "network and Internet" - "Internet connection" and "Network card") to see if they find and fix any problems.

  Have you looked into "Device Manager" (from ) under network adapters, in order to check that the wireless adapter is listed, working correctly and enabled? Right click on the adapter, and then click Properties.

• missing DVDs Packard bell driver

  Can't get my dvd top packard bell lap to work suspect pilot missing someone says there's a patch that of microsoft, I'm on w7

  The problem occurred after an update or an installed program?

  Tried the fixit of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• The WLAN Driver problem with Packard Bell igo laptop

  I have an old laptop Packard Bell IGO which I did a reinstall with XP Pro all what went well had no problem but now I am unable to find WLAN driverfor this model

  I tried to Packard Bell, but they seem not to have my model.  I hope someone can help me please with this please.
  Here are the details of the laptop
  Packard Bell igo
  Model: MIT - WEA01
  Mobile AMD Athelon (tm)
  1900 + processor
  clocked at 1.6 ghz
  352 RAM
  Thank you understand helps
  Gerry

  Oddly enough, the site I linked to more early does not include a driver for a wireless adapter.

  Although it is usually better to get the drivers from the manufacturer of the computer (especially for laptops) from other sources, if you cannot obtain a driver from the manufacturer of the computer, the next best source is the manufacturer of the device or of the less the manufacturer of the chip used in the device.

  Go back to the Device Manager or msinfo32 and get the make and model of your wireless adapter.  For a more accurate identification, get the 'Device ID of Instance' (msinfo32 called cela the "PNP device ID").  It is a string of letters and numbers beginning with PCI.  You need only the first part of this string, for example:

  PCI\VEN_8086 & DEV_2449

  You can then search the information here http://www.pcidatabase.com/ -->

  I found a British site that offers to sell a collection of drivers for the Packard Bell iGO 2000 series--> http://www.user-guides.co.uk/cddownload/Packard/PackardBell/Packard-Bell-iGo-2000-XP-Driver-CD-Recovery-Restore-Disk-419868.html

  You can buy this collection (which may include other drivers you need) or you can confirm the information located on this site that says that your computer has a "Intel Calexico2 (PRO Wireless 2200BG)" with PCI Device ID start wireless adapter PCI VEN_8086 & DEV_4220 (Web site displays the full PCI device ID if you want to compare that indicates your computer).

  If this identification is correct for your computer, you can download (free) the driver for this device directly from Intel--> http://www.intel.com/p/en_US/support/highlights/wireless/pro2200bg/ (you can consider running one of the Intel/tools identification also device driver on this web page).

• Coprocessor driver missing HPG6062ea

  So, I have a HP G6062EA, which came with Windows Vista 64-bit.

  It was great to work (except that I need to replace the battery, so its plugged in at all times) until I added a new hard drive and install a fresh copy of Vista 64 bit on it. It now runs reallly slow, like REALLY SLOW and says that it can't find the coprocessor driver despite downloading it from the HP support Site.

  I have now upgraded to Windows 7 64 bit and I have the same problem. I installed SlimDriver and it detected a coprocessor driver was missing and installed it but it still does not work fast and instead of the coprocessor missing in the device driver settings, it says an unknown device.

  Please help as I just bought a new Hard Drive & cable for the laptop and want it to work! Thanks ():

  Hello:

  Please see if you install the driver of your PC support Vista nForce chipset and driver page installs the coprocessor.

  It should be.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55407-1&CC=US&DLC=en&LC=en&os=2100&Product=3689147&sw_lang=

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• Problems with factory reset on a Packard Bell

  Hi cox.haley1,

  After a Microsoft update Tuesday May 13 laptop Packard Bell Easynote TK85-GN-051UK of my granddaughter had a huge problem with the start-up that could only be ordered with a Factory Reset. Finally I had all this work and re-installed all software programs. Several days later, after update of Microsoft more, another problem arose that could only be fixed again with a Factory Reset, so I had some things to begin to repair, but it got stuck in the Installation of the software... Install Office 2010...33/45

  18hrs. later he was still stuck there.

  I sent to Packard Bell for re-installing operating system Windows 7 DVD & utilities drivers & Applications DVD... Incl. postage. £37.

  They have not worked as once more stuck in the same place.

  Packard Bell is a Dutch manufacturer and a subsidiary of Acer will help so I don't need to waste money on recovery discs.

  Can anyone suggest something to help please?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-cannot-complete-installation-in-safe-mode/5e913a56-B29B-4386-A462-20e1991a1edc#LastReply

  Thank you. All sorted now. There is a corruption of Microsoft Office files. Formatting of hard disk. Re-installed my Windows 7, etc and then all software, updates everything and now all is well again.

• Pavilion tx 1000 missing coprocessor driver

  Ive no idea what driver it is. Nothing in the downloads mentions coprocessor driver. And, when I google, it came with a nvidia nforce system management driver. I don't know if it's right, but I still cant find in the drivers section so I came here to beg the gods pilot that they could send me a sign.

  Here are the drivers of the Hardware ID

  PCI\VEN_10DE & DEV_0271 & SUBSYS_30BF103C & REV_A3
  PCI\VEN_10DE & DEV_0271 & SUBSYS_30BF103C
  PCI\VEN_10DE & DEV_0271 & CC_0B4000
  PCI\VEN_10DE & DEV_0271 & CC_0B40

  Any help is appreciated.

  The gods of the pilot heard your plea and send this driver to install.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3185026&prodNameId=3446447&swEnvOID=2100&swLang=8&mode=2&taskId=135&swItem=ob-51717-1

• Packard Bell m/c will now fire up to the "home page" - MS system is Windows XP

  Windows xp now will not pull upward on the old Packard Bell computer, then the screen falls in "sleep" mode I have the original Windows XP disks, but does not help. Can I make a record of 'boot' via the net using my second computer?

  Here are the instructions to burn a cd for the disk to boot Hiren that you can then run checkdisk, a memory test and other tools

  Courtesy of Jose Ibarra

  Do you have a Hiren Boot CD, which you can download here:
  
  http://www.hirensbootcd.org/download/

  The ZIP file is large, so the download will take probably a little while to complete the bit it is worth.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  In the file Hiren ZIP are the file BurnToCD.cmd that you can double-click to start, but I've never used and prefer to use ImgBurn.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install anything from UniBlue or the Ask Toolbar (never install the ASK toolbar for nothing).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.

  Let chkdsk finish to correct the problems, he could find.

  According to the speed of your system, the size of the volume, the amount of data on the volume and what chkdsk finds to do, he may take a long time for chkdsk with error correction to complete (several hours) or it may seem to be 'stuck '.  Be patient.  If the HARD drive led blinks always, chkdsk is something to not interrupt him.  It finally end one way or the other.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You may need to run Chkdsk c:/r more than once.

• Need drivers for graphics card for a Packard Bell iMedia 5070

  Hello!

  I have a "Packard Bell iMedia 5070 desktop PC", unfortunately I have more preinstalled graphics card drivers. Is there someone who could direct me to a place where I can download them? They are not on the main site of Packard Bell.

  Thanks in advance!

  Hello

  Here are the links to the graphics card that can be installed on your computer. Access links and run the driver search tool, which is the driver to be installed on the computer automatically.

  Intel: http://downloadcenter.intel.com/

  NVIDIA Driver Downloads: http://www.nvidia.com/Download/index.aspx?lang=en-us

  AMD Support & drivers: http://support.amd.com/us/Pages/AMDSupportHub.aspx