Flash HTML document read does not correctly... HELP Please

Similar Questions

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• My application get Windows 10 does not work HELP Please

  1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:

  The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10

  2. when I click on view Confirmation it Says:

  YOUR UPGRADE IS RESERVED

  There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.

  and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10

  Please help thanks

  

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  or

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Comparison of simple table does not. Help, please!

  I struggled with this problem for a few days now, and I'm slowly losing my mind.

  • I am in Adobe Acrobat 10.
  • I have a field called button group: btn0, btn1, btn2, etc..
  • I have a band called text fields: txt0, txt1 txt2, etc..
  • I have a script that takes the value of txt0 and makes the legend of btn0 and so on.
  • I have a script that sets the btn0 to setFocus txt0 MouseUp action, and so on.
  • These scripts work very well.
  • I have a script that takes values of all fields txt and sort puts them in a table.
  • I have a script that takes the array element [0] and makes the legend of btn0 and so on (alphabetical list of buttons).
  • These scripts work very well.
  • I am trying to compare the value of the array element [0] to each field txt to find the match, then set the action MouseUp btn0 to setFocus to the corresponding txt field, and so on (until my alphabetical list points to the correct location).
  • It is here where I am at a loss.

  Here's what I have:

  specified fields txt

  txt0 var = this.getField ("name of Z");

  txt1 var = this.getField ("name");

  etc.

  put their values in an array named rxArray

  var rxArray = [txt0.value, txt1.value]; etc.

  sort the table

  rxArray.sort ();

  Set the legends on the sorted array elements

  for (var i = 0; i < 5; i ++) {}

  var b = ("btn" + i);

  this.getField (b) .buttonSetCaption (rxArray [i]); works very well; sort by alphabetical order of the list of buttons

  Here is what goes wrong

  for (var x = 0; x < 5; x ++) {}

  var r = ("txt" + x);

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  }

  }

  }

  end

  Here's what I know:

  Alphabetical order and labeling works very well, but the MouseUp scripts to buttons work at all. Nothing happens.

  If I change the piece next to the above script:

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  To do this:

  If (rxArray [i] == txt1.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  Because rxArray [0] is equal to the value of txt1 ("name"), then the MouseUp script for btn0 Gets the value:

  Txt4.SetFocus ();

  So I know that, whenever the nested loop runs, the case statement is true, and the setFocus script updated. Until the end of the loop, leaving the setFocus as last run element. Then why my script does not work? It should only update the setFocus script IF the array element matches the txt field and it is on THIS field of txt.

  Please please help. I know I'm missing something simple somewhere.

  I don't see why you would need tables at all... For example, sortNumber.

  You can essentially all this code replace it with this:

  for (var x = 0; x)< 5;="" x++)="">

  var t = this.getField ("t" + x); the text field

  var b = this.getField ("btn" + x); the button

  b.buttonSetCaption (t.value);

  var s = "this.getField('"+_t.name_+"').setFocus()";

  b.setAction ("MouseUp", s);

  }

  It is the same for the rest of your code as well.

  With respect to the addNew function, you must add a pause command inside the if statement to prevent continue further after the first empty field has been found.

• Dreamweaver CS4 errors, Spry widget does not. Help, please!

  I remodel a website and downloaded the this contact page html file. I opened it in Dreamweaver and I started getting this error. I opened the html file has some JavaScripts inside and I think, the scripts had a conflict with Dreamweaver CS4. I already deleted these files, I tried to open it and I always meet these errors.

  These are the errors I get:

  1. when I open Dreamweaver, this pop-up message:
  "While executing onLoad in RecordsetFind.htm, the following JavaScript error has occurred:
  In the file "RecordsetFind".
  findRs is not defined. »
  2. I click OK. Then I get this message:
  "While executing onLoad in design Notes_onOpen.htm, the following JavaScript error has occurred:
  In the file "Notes_onOpen Design".
  onOpen is undefined. »
  3. I just click OK. When I open a html file to edit or create a new, this error pops up again:
  "While executing onLoad in design Notes_onOpen.htm, the following JavaScript error has occurred:
  In the file "Notes_onOpen Design".
  onOpen is undefined. »
  4. I shall yet once just click OK, then this error:
  "The following translators were not loaded due to errors:
  ColdFusion.htm: has configuration information that is invalid.
  SpryWidget.htm: has configuration information that is invalid. »
  5 then, I will just click OK again. Then, when I'm working with projects or create a new project with Spry, it does not work properly. I got the code and update the list Spry or content manually.
  6. when I close Dreamweaver, I always have this error:
  "While executing onLoad in TeamAdminTempDelete.html, the following JavaScript error has occurred:
  In the file "TeamAdminTempDelete".
  delTempFile is not defined.

  I tried to uninstall the Dreamweaver and install again, but it did not work.

  What should I do to make the spry works again and remove all those annoying errors? Furthermore, all my Spry widgets do not work and these errors I encounter in all the Sites that I'm trying. How can I make it work again? I tried the search problems in CS4, but I couldn't see one, only in CS3.

  Help, please.

  See if the following can help (found in the Dreamweaver FAQ)

  JavaScript and other unexpected errors

  --
  Mark A. Boyd
  Keep-on-Learnine :-)
  This message was processed and published by Jive.
  It will not be considered an accurate representation of my words.
  She may not even have been designed as a response to your message.

• Permissions of third-party software does not. Help, please

  I have a major problem with El Capitan at the moment and I was wondering if anyone can help or has the same problems.

  What happened completely out of the blue and everything was working fine until yesterday to the top. The Mac does not seem to be recognizing my permissions of software. I opened my copy of IK Multimedia Amplitude 4 like I do every day to work and a message pops up saying

  'AmpliTube 4 is not permitted. The 10-day grace period expired. Click OK to start the IK Multimedia Authorization Manager or click Cancel to continue. "I have already registered this product through the Manager of authorization of the IK Multimedia comes out when I install everything first. I've never seen this message before, it is not logical at all! Then I entered the codes of the series in the handler permission again and it fixed the problem (even if it's not necessary) and today I turn on the Mac and the problem has started again.

  Then I went to another application I use every day called Sibelius by Avid. Same thing happened. Then I got the registration codes, and now it seems to be okay. I tried to open another application I use Ableton Live and it says the same thing again. I double click my authorization file that I have to do this and it says that the file is not valid for this computer.

  I'm sure that there is a problem with El Capitan not recognizing my authorization to use the software, I installed. It's too much of a coincidence that 3 3 companies software different all stop working at the same time, right? I called Apple support and they tried to get me to reset the permissions on the apps but it still does not and in the end they told me to contact software manufacturers. If anyone can help I would really appreciate it I use this software for my work and I need their work as soon as POSSIBLE.

  Thank you very much

  Simon

  Unless you have purchased these applications via the Mac App Store, OS X has no mechanism to allow the use of the installed software. This is the license code is written in the app or a license of Add-ons Manager. Licensing may not be compatible with El Capitan, but this is the limit of the participation of El Capitan in the licensing process for these applications.

• HP pavilion dv9925nr sound does not work help please

  Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

  Hello:

  Then I recommend that you follow the instructions in the guide to the link I posted above.

  After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

  Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

  Pilot modded by silver here

  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to connect, install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when he complains, Reboot.

  If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

  Paul

• Inserting a record does not. Help, please

  Hello;
  I'm puzzled. I am trying to get this code to insert a new record, but as it passes through the code, it loses the record and he does not db insert. What Miss me? I can't understand.
  
  My code:
  
  < isDefined ("Form.newEdit_OK") cfif >
  
  < isDefined ("Form.RecordID") cfif >
  Here's my query, if it is updated and existing record
  < cfelse >
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO news
  (title, newsDate, htmlList)
  VALUES (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.title #" >,)
  < cfqueryparam cfsqltype = 'cf_sql_date' value = "#form.newsDate #" >.
  < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.body #">) "
  < / cfquery >
  < cflocation url = "news_RecordView.cfm" >
  < / cfif >
  
  What did I miss? I can't understand.
  
  CFmonger

  I have correct if/else for problems like this:

  
  true
  
  fake
  
  

• updates does not stop, help please

  I'll start, windows update, and a window opens which gives me a button "check for updates".  I click the button and it starts to run, looking like it is looking for updates.  But just to stay there and keeps going, never arrived.  I said "check for Updates" and the color of the bar moves from left to right as if she does something.  It will continue for a day or two sometimes and end with something indicating that it cannot check the updates.  Help, please

  Start by:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• MacBook / J4580 All in One / software Parallels - does not PRINT - HELP Please

  I'm going to lose my job in real estate - I have a Macbook - when I'm on the side of Mac - the printer works - and print.  However, when I'm in Parallels - it does not recognize - only get the message "printer error".  Real estate agency associated with the elements run only windows - so I spend a lot of time in the analogies.  Our it guy at the office said to make sure I have install the CD on the side, parallels - but this doesn't work either.  Called the Apple Support - they could not answer for Parallels - cost of Parallels for their support - so I will try this forum first, before I have to pay to see if anyone else has encountered this.  Thank you!

  This can be a Parallels in question, but let's get XP work just before mess us with Paralalls:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click on 'Next' and follow the instructions.
  5. now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  6. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  7. Add the name of print spooler, and then click "next".
  8. click on "next".
  9. click on "Next" and "Finish."

• I had called a few days before asking to NOT renew my membership automatically &amp; don't charge ME but does not. Help, please!

  He's very frustrated without any formal following up and comments after talking to your online services. Help, please!

  I shared the details in private message.

  Concerning

  Megha Rawat

• Flash doesn't work does not correctly

  I downloaded this browser because it is supposed to support flash on my tablet. I have found that not all flash elements are working properly. There was a flash element I've been doing drag and drop a statement on a disc if I have accepted or not agree. The statements would decrease when I typed it but do not drag. It is perhaps down to web design or the browser. Everyone has had such problems, and if someone can provide a solution?

  Hi Andrew-uk,

  Please do not forget to download Firefox for Android from the official page in the game store:

  • https://play.Google.com/store/apps/details?ID=org.Mozilla.Firefox & hl = in

  It is also possible that the problem is with the site itself. If you are able to provide us with more information about the Web site you have problems with, but also resembles what the error, our team of contributors may be able to study.

  -Ralph

• VoiceOver Math read does not correctly

  I am running OS X Yosemite 10.10.4 on a Macbook Pro and using VoicOver with Safari 8.0.7

  I have a few problems in mathematics is playing.

  1. the parentheses are not read
  2. exhibitors are read as a '4 2' instead of '4 squared '.
  3. the "minus" sign is read in English while most and signs of division are read in Spanish (which is good)

  Evaluation 20 + (− 30 10) ÷ 5.  < p > Al 20 + (− 30 10) ÷ 5. < /p >

  Al 4² − (4 + 6) ÷ 2.  < p > Al 4 < sup > 2 < negative − (4 + 6) ÷ 2. < /p >

  < html lang = "es" >

  Any reflection on the changes that I could do is settings to have these better read? Please, we head to MathML, so it's really a matter of VoiceOver.

  Best,

  kmyett

  Hello

  Apple has not designed voiceover math reading yet, mainly because it's something very few people will ever use and which takes a lot of time and energy to implement. To show Apple that some clients need to be implemented, please submit feedback to the Apple OS X development teams: http://www.apple.com/feedback/macosx.html

  Nice day

  James

• Satellite 1800-921 p3 1 g 1 DVD/CD-RW read does not correctly

  I have the above system and when I put a DVD disc, music or program he tries just to read and just snoring and clique. Just the odd occasion it will read. Does just cleaning or do I have to buy a new one if yes which model should I buy.

  [Edited by: admin on 4 February 06 08:40]

  Hello

  I don t think that a disk cleanup would solve this problem. You can try to clean the lens but I m with skepticism.
  If you want to buy a car, please be careful. You need a compatible player and supported.
  Please see this page:
  http://www.getpartsonline.com/Toshiba-CD-drive.html

  Some readers are set to CSEL, master or slave. It is very important that you buy a disk with the right settings.

• Point of Modbus DSC read does not correctly

  I use 2013 LV 32-bit on W7 64-bit.  I talk to an industrial controller with Modbus to Ethernet.  My current software uses the interface modbus DSC, in which I define the bus Modbus itself within a library in the project, and then set each point Modbus as an address within this definition of modbus.  Inside LabVIEW, you can then get the data Modbus via shared Variables.  I am currently using the dynamic variable calls shared, rather than static variables shared.  I have points that are Boolean (coils) and real, with a read-only and a read/write.  In general, it all works.

  However, there is a real read/write that acts funny.  If I put a new value, or the industrial controller assigns a new value, the industrial controller Gets the new value.  Variable motor shared on my computer gets even the new value, as can be verified by opening the Distributed System Manager.  But LabVIEW continues to read the old value, without error.  Other points of read/write work very well, and I have looked on the definition of the address several times and cannot find any reason why this should be different than the others.

  Does anyone have any ideas why DSM sees a new value of a shared variable, without LabVIEW continues to get the old value?  I watched the init for the dynamics of SV case, and I see all the options I can change to try to solve this problem.  My next attempt will be to rewrite the entire auxiliary system so that it uses the most recent Modbus Library of NOR and ignores the whole thing of DSC.  It will be probably much better for other reasons as well.  I noticed that with DSC and the shared Variables, the first time that the program runs it starts fairly quickly, but subsequent executions can take up to two minutes to connect to the SV.

  Thank you

  DaveT

  Never mind.  I think I found the problem.  A bug minor configuration in my own code...