Flash video no longer will play on my computer

Similar Questions

• I burned a bunch of digital files on a cd - r, they will play on my computer, how to make the cd to play on my dvd recorder or other players?

  I did a video cd which is the type cd - r format. He will play on windows media player, but my recorder sony dvd won't play it. It is said: unknown disc, please check again. What should I on the disk or the files to play on other players?

  Depending on the software you used to burn the CD, you might have to "finalize" or close the CD.  The option often says "make this disc can be read by other computers" or something similar.

• Call of Duty 4: Modern Warfare, it will play on my computer?

  I have a Gateway laptop with specs:

  Microsoft Windows Vista, Intel Core 2 Duo processor t6400, 2 mb l2 cache, 2 GHz, 800 MHz

  Memory: 4 GB DDR2
  Video: Mobile Intel Graphics Media Accelerator 4500MHD
  Hard drive: 320 GB

  Will this game on my PC? Help please, I want to play this game but don't want to buy this game whether it won't play! Also, why everyone says things about video cards? What is a video card? Why do you need 1?

  With integrated graphics, this will probably double run, but probably not too well. On video cards... basically, you need a higher video card end of run of higher end games. Most of the computers that you get will come with a video card pre-installed that will work very well, but not for games. You can buy a pretty good card for about $100 these days, unless you use a laptop computer (you cannot change the video card in the laptop).

• My DVD will play on my computer but not my DVD player

  I created my first DVD using again, and it seemed to work perfectly. He would like to open and do what it was supposed to do on any computer. However, when I stick it in my DVD player for my tv, it starts the loading process and the two blue horizontal line scroll through the TV screen and then blocks my DVD player. I have to disconnect my DVD player and then plug it upward and quickly reached the eject button to release the DVD.

  These questions below may be for another product... but the kind of information that you must provide is the same for the products you use

  Need someone to help... more information please click below and provide the requested information

  -Organization of information FAQ http://forums.adobe.com/message/4200840

  Something to try (if you're Windows)

  Create an ISO of DVD output file, and then use the FREE http://www.imgburn.com/index.php?act=download to write the ISO to a DVD (send the author a PayPal donation if you like his program)

  .

  Read http://forums.adobe.com/thread/1322583 for notes on the Imgburn WITHOUT any add-ons toolbar installation

  .

  ImgBurn will read the mark of REAL from the disk drive, which isn't always the same as the label for the box (Memorex is known for 'nothing' buy and put inside a box of Memorex)

  .

  When you write to disk with Imgburn, use possible speed setting more SLOW, so your burner has the better chance of creating holes to burn laser "good, well trained"... Since no DVD player is required to play a disc burned, having a 'good' high-quality Virgin will help

  .

  Use Taiyo Yuden simple layer or layer two Verbatim or Falcon Pro for layer two printable inkjet

• HD camcorders files saved as. MTS, how to save them in a format that will play on my computer?

  When I transfer my HD camcorder files, they are registered as .mts and are not playable and I don't know how to convert or save in a compatible format in the first place.

  Hello

  There is no mts converter software from Microsoft but you can use your favorite search engine and download a third-party converter to convert some .mts in another format.

  Note:  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Reference:

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the passage of a different program and vice versa, Premiere Pro will play is no longer the sequence

  It took me a while to limit this problem. Quite randomly, my sequence would not apply.  I finally reduced to this.  I hope that the 28/01/16 update should fix, but it didn't.

  Summary:

  -commutation of Premiere Pro to a different program, while a sequence is stopped and then backward, tilt will cause Premiere Pro is no longer playing the sequence.  .

  Follow this exactly to reproduce the problem:

  (1) create a new file with a new sequence inside

  (2) create a minute long clip of anything (bars + tone, color matte, text, etc.) and drag it into the timeline

  3-hit game

  (4) setback (this is important!, see below)

  (5) to switch to another program, either via alt - tab or open another program so it gets the focus.

  6) move to Premiere Pro

  7-piece struck again, sequence no longer will play is not the expected behavior.  PP must be rebooted to solve the problem.

  If you do not hit 'stop' to step 4 and let the sequence to keep playing:

  -When you pass on Premiere Pro and then return, you can press the stop button.  When you click the button new play things will work as expected.

  My configuration: win 7 + Premiere Pro 2015.2 release, build 9.2.0 (41), i7 Proc/32 GB memory

  My solution (sad), it of that if I need to go to another program for a bit, make sure to hit 'play' in Premiere Pro before moving on to another program and let it in the background.  When I come back I can play and stop as usual.

  Hey thanks, that the explanation is logical. "Mallocing everything in desperation" will be my new go to words to describe my state of mind sometimes.

  Fixed it!, but it was something else. :

  I tried to uncheck "allow applications to take exclusive control it" box and rebooted, verified that the box was always checked... but the first has always had the same problem. The stop/play button icon changed as you noted, but the timeline not yet played.  This led me on a path of futzing with different combinations of audio material.

  Difficulty of summary:

  -First, change the 'default' output to some other active sound output (even if it is not physically used), then change it back.

  (1) in the first Audio hardware preferences, I changed "Default Output" for "Realtek Digital Output" (which is enabled in my sound control panel, but nothing is physically connected).

  (2) I went back to the first, and he could still play the timeline after alt-tabbing to other programs and return.  There was no audio since obviously I have nothing plugged on my outputs digital.

  (3) 'Exit by default' Changed in first preferences Audio equipment Audio back to "Speakers (Realtek High Definition)", tried the stuff of alt - tab again and as if by magic it worked like the good old days (early 2015).  Even still, it still works very well even though I have the checkboxe "exclusive control" ticked off now (parameters of sound from speakers in the Panel).

  Notes:

  -I don't know if step 2 is required.  Things are working fine for me and no matter what I change, I can't do things in the State 'broken '.

  -At some point, in the sound control panel, I changed one of the outputs digital to be default, but that doesn't seem to make a difference at first. Whether or not this has finally made a difference affecting the steps above, I don't know.

  BTW, audio installation is:

  Audio is Realtek High Definition Audio, version 21/08/2013 6.0.1.7023 (hardware Audio first output by default is "Speakers (Realtek High Definition Audio)"

  I have a 3 GB Evga 780 also graphics card, but no HDMI outputs are used/activated.

• Video WEBM do not play correctly.

  I'm playing a WEBM video in Firefox, but the video only halfway will play before it stops just for no apparent reason. I made sure that the right codec WEBM was in place, but it did not help. What is going on?

  Thanks in advance!

  This happens with all the WebM videos or only on some websites?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Also make sure that your security (firewall, antivirus) software is not blocking the videos.

• Why some DVDs will not play in my computer DVD player?

  I have a small collection of commercial DVD movies.  Most of them come from the place of the U.S. market, and some come from Asia... He play ALL these DVD in my Phillips DVD player that is connected to my TV.

  But only some of these DVD will play in my DVD player which is in my computer Dell Inspiron 531 with Windows 7 Ultimate edition.  This computer has a DVD/CD SAMSUNG HD161HJ SCSI disk drive.

  Some of the DVDs that will play on my computer are the American market, and some of them are of the Asian market, so I don't think that this has nothing to do with why some of these DVDs will not play on my computer.

  DVDs that play fine in my Phillips DVD on my TV player that will not play on my computer don't yet seem to close at play on my computer.  The DVD that will play on my computer liquidation (you can hear the noise) in the DVD player in 20 seconds and they start playing automatically in Windows Media Player... but I welcomed all others who won't have to sit in the DVD player for several minutes each in my tests and nothing happens... There is no wind sound and all nothing is happening on the computer screen.

  This doesn't seem to be a problem with the driver software for the disk hard because some of the DVDs will play.

  None of these DVDs are buckled and all of them are clean.

  I tried two or three times test each of DVDs that won't play, the removed from drive and put them back in.

  Does anyone have any suggestions?

  Thank you

  NuMetro

  Hi Dale,

  Although I never had no problem with the DVD or the CD I burned on PC, I think you're going to probably the same thing, that I've been with this internal DVD/CD player, is not a software problem, but just the characteristics of a lower quality DVD/CD player, and it isn't necessarily the symptoms of a dying man in car , but just a stock car low quality that some computer manufacturers cut corners with.
  The drive in the computer that I was referring in this thread is a DVD/CD SAMSUNG HD161HJ SCSI disk drive. Which may or may not be identical or similar to the reader, you have problems with, but the computer on which the reader is underway is a Dell Inspiron 531.
  Through the information that I've gathered on this thread and on another forum, I came to the conclusion that it's just a cheap player who gives intermittent performance recognizing various DVD, but as I said, the drive I troubleshooting always recognize DVDs and CDs that I burned in it... It was just the DVD movie that I have problems with.
  I dug my loyal reader DVD LaCie and plugged and I had no problems with him acknowledging and play ONE of my DVDs on this machine, which proves that the problem has nothing to do with the software system or DVD player software, as in the case suggested by someone else on this thread.
  Just buy yourself a Firewire drive or USB-2 DVD decent and you're probably fine.
  NuMetro

• After copying the CD, he will play on the drive from the computer but not on my CD player

  I copied a few albums of my computer on blank CDs with media Center.  The cd will play through the computer but not on my CD player

  I copied a few albums of my computer on blank CDs with media Center.  The cd will play through the computer but not on my CD player

  ==============================================
  Looks like you have created a data CD.

  You need an Audio CD (music) for playback in a standard CD player.
  (an exception to this rule would be if you had a CD player that has been
  compatible with the files MP3 and you burn a CD of data with MP3s)

  See the following article...
  (scroll down and expand the section "Burn audio CD")

  Windows 7 - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

• Update Flash, now Safari 9 will not much play videos

  Hello.

  I have updated Flash for 20.0.0.267 on my Early 2011 17 "MacBook Pro (10.10.5)." Now on many web pages, Safari, (9.0.2) will not play videos. He will take care of them and I can see that SHOULD play, even scroll through the videos and see photos of different places in the videos, but no amount of press Play/Pause will get the video to PLAY.

  YouTube and Facebook videos seem to play Ok. But other sites, no. I thought it might be the Flash update, but to test it, I downloaded Chrome and videos that are "stuck" plays not not in the fine Chrome Safari game. In the Safari preferences under Advanced I unchecked "Stop plug-ins to save energy. Made no difference. In the Flash Player settings under Advanced, I deleted 'data and browser settings '. It made no difference.

  Anyone know what is happening? How to fix?

  Thank you

  The f

  1 uninstall Adobe Flash Player:

  Make sure that this step 2.9 is not ignored.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html

  2 reinstall Adobe Flash Player.

  https://get3.Adobe.com/flashplayer/update/OSX/

  3. allow Plug-ins

  Safari > Preferences > Security

  Internet Plug-ins > "allow plug-ins".

  Activate it.

• my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  Maybe some type of update caused a compatibility issue.
  Doing a system restore to an hour before the beginning of the question could
  be worth a try:

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• Windows Media Player will play is no longer my local computer .wmv videos.

  Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

  Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

  =================================
  If it is a recent issue... it may be worth trying to do
  a restore of the system at a time before everything started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• When the file is exported to SWF format, it will play all video files that are assigned to the keys

  I created a Flash project, in which I have buttons that play different music videos (by jumping to an image not loading the film when the button is clicked)

  Basically when I export the file as a SWF file to a place, which is different from where all videos are stored only 1 of 6 videos will play, however they all works when I export to the same file, but if I move it, it will play only 1 video again.

  So I want that all my video files to play when I move my swf in different places.

  I'll upload some screenshots, if you have any questions do not hesitate to ask. Thank you

  Page, libraries, timelines

  

  Code

  

  All files will play only when it is in this folder

  

  Help...

  It was something really simple I am downloading the videos in a weird format but I converterted to standard FLV and it was very good

• How can I be sure integrated video will play in Captivate 7 project?

  Hello guys, Evan here (formerly RiskLMSspecialist). I have a few projects recently I published 7 Captivate in simple SWF. They have been updated with the release of flash player 10 and a couple of my classmates are able to view the training without any problems, but another, my supervisor, plays the presentations and concluded that none of the videos (imported as videos of the event) will play in Internet Explorer. This will simply require updating the flash player plug-in to see? Is there a way to ensure they will always play? I fear only that the 1000 + employees who need to view this training ultimately will be a report similar (1/3) who have not updated their browser and will subconsciously be lack of content. Thank you.

  BTW, in case anyone needs to know, I found myself just to convert the whole project being compatible HTML5 which bypassed completely the need to check for the Flash Player updates and such. Probably the best solution I can think of any company that cannot easily update all the plugins Flash Player of each employee easily.