Flashing at startup.

Similar Questions

• Mac Mini pink Flash at startup

  MAc Mini 2012 i7 16 GB 1 TB (bought in may 2013)

  MY trusty old Mac Mini seems to have a problem.

  When I start up from the Mac Mini, I see a pink Flash on the screen (NO PINK LINES THAT FLASH, this rose arrives on a section of the screen) for just a second then nothing, just a blank screen.

  I tried starting it upwards and pressing the SHIFT key, nothing's happened - just a blank scree. Then I tried the Alt key at startup - again all that I see is a white screen.

  Does anyone have an idea what's happenin? He was still 3 weeks left applecare.

  Try another monitor and cable to keep out them.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode. Yes, even once after doing the above

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

  If still problem, quickly make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• System hangs at a black screen with cursor flashing during startup

  Original title: Hp compaq presario cq60 with Windows vista, is unable to start windows, crashes with indicator flashing in the top left corner after startup messages

  I have a Hp compaq presario cq60 with Windows vista, whenever I turn it on it will fail to start windows, it passes through the boot screen and then after that it crashes just with a flashing indicator in the upper left after all the 3rd reset and press F8 to enter the boot options, I chose the press and enter last known good configuration and it works the problem is that I have to continue to do so every time. How to solve the problem

  Hi karltoet,

  Follow all the troubleshooting steps listed in the items listed below:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  What are the system recovery options in Windows Vista?

• Question mark flashing at startup

  Spring 2011 MBP with EL Capitan.  Thus, used my MBP last night and he started beachballing and force apps to quit smoking, I started but performance has not improved and the beachballing continued.  Was not yet able to click on the Apple icon to restart.  So, off the power by using the power button to restart as I did several times.  Reverse and get the screen gray with the folder icon and flashing question mark.  Completely bewildered, because I have never seen it before.  Restart again trying to reset the LANDAU thought that might have some effect, nothing will do. So, do a quick search on the old smartphone and find out how to get into recovery mode.  Go to the utility disk and look for my HARD drive, but he's not here.  Only disk 0 and then below Base of OS X system, something like that, don't remember what he said exactly.  Yes, I knocked at the realization that my HARD drive is erased, but I wonder if it is indeed cleared or if some kind of virus or something could have caused this and that, somewhere, my HARD drive is still intact.  I know it's probably a long shot and wishful thinking, but I'm exploring all the possibilities before you restore from my backup.  I have not saved in a few months, so I really hope this is the case, because I've probably lost some important stuff...

  Any help would be appreciated...

  Thank you!!

  If a flashing question mark appears when you start your Mac

• HP G62 - 229WM Notebook PC lock flashing at startup

  I have a HP G62 - 229WM Notebook PC that will not start.  It is consumed, but black on screen.  I have a fixed light at the power button / stop and the caps lock has a flashing regular, only 1 in the series.  I replaced the processor and still have the same question.  Is it the motherboard?

  Sorry, but it doesn't seem to be the motherboard. I've seen other posters have the same processor Flash error but no luck when his replacement. I think that it can actually be a bad cpu socket causing the blink code.

• Black screen, caps lock flashes on startup

  Dear everybody. I know there are already a lot of similar topics, but none seem to portray exactly my situation, so I hope someone will be able to land a helpful hand.

  Then. A few months ago I had to move to Japan in my country (Italy). The warranty on my HP dv7 6189 sl expired while I was here, but since my laptop was having really bad cooling problems, I have documented my self with videos and guides to the internet and everything I coul find and decided to take it apart myself. I cleaned all the dust from the fan, the basic form of thermal paste on the processor and the Ati HD 6770. Then again once, back to paying attention to put it all together as it was (HOPEFULLY). Anyway, when I tried to start on the laptop, I found it now black screen guard. The light F-12 (wlan connection) continues, keeps flashing orange (like no wi - fi connection) and the CAPS LOCK. It seems to me it blinks THREE times before stopping a few lil lil and then repeat the cycle again. Anyone know what can be the problem? I'm desperate... Thanks in advance...

  Hello

  Based on the codes of following indicators:

  http://support.HP.com/us-en/document/c01443366

  You must:

  (a) reinstall the memory.
  (b) If you continue to experience this error code after the reinstallation of the memory, the problem may be with the memory itself. Grab the new memory of the computer, put back original memory in the computer, and then test again it.

  Good luck.

  PS we have a rule in our data centers: do not touch the machine without a static Anti bracelet.

• The mouse pointer freezes and the monitor starts flashing after startup

  Original title: mouse point frized

  Seconds after my departure from desktop windows 7, point the mouse freezing, screen starts flashing and many vertical column of the flashing spectrum cover the screen. I take the power off, turn on. This time give me the ability to run in safe mode or a few more option. I try them all, don't work.

  Hi Paulamatilde,
   
  I imagine the inconvenience that you are experiencing right now. I will help you on that.
   
  The issue you described mainly due to the incompatibility of the display driver. Please answer the following questions so that we can better help you:
  1. don't you make changes before the show?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the steps mentioned below and check. Proceed to the following method if only the problem persists.

  Method 1

  Install the driver updates and check if the gets resolved. You can check the link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Method 2
  Download the display driver and the driver of the mouse on the computer manufacturer's Web site and
  install and then check if the problem is resolved.
   
  Method 3
  Check the clean boot issue as Clean Boot Clan have disabled all third-party programs. This way we know whether or not any third-party program is causing the problem. You can see the article mentioned below.
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
   
  Note: Note: refer to the section "How to reset the computer to start normally after a boot minimum troubleshooting" to start the computer normally.
   
  I hope this helps. Please get back to us if you need further assistance.

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• Crash suddenly and cursor flashing at startup...

  I have a R4 Aurora and was playing a game when it turns off suddenly and seem stuck in trying to restart. I disconnected and after a little plugged back in and tried to restart. The screen will display the Alienware logo and then switch to a blank screen with a cursor blinking in the upper left. The lights will turn on using the theme I chose.

  Any help will be very appreciated!

  Hey Naomi.

  I am very happy to say after rerun the test of HARD drive he came back OK.  Then followed all the instructions on the conduct of a pure install video drivers and install the video drivers Alienware. Computer nice race!

  I also discovered after using Sestem Detect I was behind on a few other drivers, chipset and others and will update this weekend.

  I really appreciate all the time and you provided a huge hug to help me! 

  Take care...

  WISPR

• Satellite U400 PSU44e - bad BIOS flash

  Hi all

  I had a big problem.
  Yesterday I was bios new flash 5.0 for my Toshiba u400, but he still on about 70% of 2 hours.
  I turn out of it.

  Then after plugging I see onlu black screen and nothing happends, I had something bios bad flash.

  I try with phoenix crisis recovery and a usb drive.
  I try with the toshiba via bootable CD bios update.
  I try to make the bootable CD with files BIOS.wph (and I change autorun.bat).

  I try this with the keys: fn + B, win + B and Fn + Esc (it's power led flashes after startup).

  What you suggest me?

  Service is the last option that I accepted.

  Concerning
  Alan

  Hello

  You should get in touch with Toshiba ASP in your country.

  Maybe the crisis disk BIOS could contribute to reflash the ROM module otherwise it could be possible that module ROM is damaged and motherboard needs to be replaced.

• Flash 10 install and use with PowerPoint issues

  Hi feel really frustrated now and I'm keeping my fingers crossed for a quick solution.

  I am running Windows 7, Flash 10.0.32.18 (now the 10.1 beta in desperation) and I did have to reinstall flash on startup until last night, so it's been an unhappy towards the bottom of the turn of events for me and not even the reason for research forums.

  My problem started as I stood in front of one of my classes (I work in a college) with PowerPoint 2007 and a lesson ready to go and the images Flash who had always worked refused to be anything other than a still image without interaction.

  Unfortunately, when I upgraded to Windows 7, I did a clean install and reinstalled Office as well as the latest versions of Flash, Shockwave etc. I say unfortunately because I now have no way of knowing where the problems lie. On request, Microsoft is categorically stated that it is a matter of Adobe and the forum appears to support this thesis.

  On the investigation, I found that when looking at a slide of the object has been identified as an object Flash, but I can't show all properties, also "insert a shockwave flash object' is not available in the control toolbox. This would indicate that Flash is not installed even if looking at a flash on the internet was not a problem.

  The last number which may help a solution, is that when you try to view a .swf file, I learned that I need to have Flash Player installed (I have) and trying to use a third party such as SWF Opener flash drive he also asks me to install flash.

  As everyone here I have installed, uninstalled all Flash etc. several times that I care to remember now.

  I'm not technically minded when it comes to the nitty gritty of software use and programming, I like just things to work.

  Please help as the most important thing I use my laptop so that I have now cannot!

  Following the previous post gm377

  Summary: The Installation from the download from Adobe site installs Flash Player 10ActiveX AND the Shockwave Flash Object

  I think that Version Stand alone of the Setup program installs ONLY the Flash Player, NOT the Shockwave Flash Object

  That is why #1 in the post before this one is correct. The Shockwave Flash object (plugin is requested)

  And that's what youtube asking because, though even they say "Flash Player", they assume and understand that the Adobe

  site installs both.

  Now, Adobe is no indication that the uninstall program needs to be run before a download and installation of Flash Player 10 ActiveX.

  In addition, because the beta was installed and now isn't there and with uninstalls and installs, you never know if there is a problem.

  Flash Player 10 ActiveX should be listed in Add/Remove and Manage Add ons Shockwave Flash - Adobe Systems, Inc. - object

  Enabled-ActiveX Control must be registered and the file is Flash10c.ocx.

  Solution: Back to the Adobe test site - http://www.adobe.com/software/flash/about , keeping your add ons disabled and enabled as you have indicated in the screenshot of today (20/11/09) and as the message is ' an additional plugin is required to view some items on.

  This page"and the small image says"Get Plugin"and when you click it, the message is it wants to install Flash Player. The test is clearly you say that the Shockwave Flash (ActiveX Control Flash10c.ocx) object is not there, and saying: it wants to install Flash Player, it also says Flash Player 10 ActiveX isn't here either, or the "Get Plugin" would not fail.

  If Yes, do it! Don't forget to restart later, check in Add/Remove and see what is listed, check in Manage Add ons and see what is there. Then see what youtube to say and your slides in Power Point and where else you want to go :-)

  The worst that can happen is that it won't do the job and it will uninstall it and reinstall, but I'm hoping success!

  Sorry for the long posts, but I write as I think.

  Nice screenshots by the way, thanks

  UPDATE:

  I ALMOST FORGOT, LOOK OUT FOR THE GOOGLE TOOLBAR. IT IS GENERALLY VERIFIED AND WILL INSTALL WITH ADOBE FLASH IF YOU DO NOT UNCHECK HIM.

  Post edited by: eidnolb to add a comment Add ' l

• Satellite P30-133 CD/DVD not recognized in Win XP

  A few months ago that the CD/DVD drive disappeared from windows XP home SP2
  It is visible in the list of the BIOS boot, but I'm not sure if it turns elsewhere in the bios.

  The BIOS also seems to be ad slowly started upward. I have reset the BIOS to default settings and the player was available for long enough to reinstall windows. Resttting the deafault BIOS does not work every time. Everything is now on the machine is a new installation of windows and the drive is not visible. Light on the DVD/CD drive flashes on startup every time, but it will not read a bootable disc.

  The disc was found in another machine and works fine. What is a BIOS problem or a motherboard problem.
  I am reluctant to spend huge sums of money on this laptop, as he already had a new motherboard a couple of years.

  Any help or advice appreciated.
  This isn't a problem that will be solved by the registry hack 'filter '.

  Have you tried a BIOS update?

  You reinstall Windows using the recovery disk? Or have you installed Street copy of XP?

  Try to boot from a Bootable CD, if it does not, then the motherboard may be faulty, or the drive has intermittent problems.

• Satellite C660 - TOSHIBA Accessibility error

  Hello

  I recently bought a Satellite C660/C660D fine, apart from one or two minor issues (which this thread is on about). First of all, the laptop was and is still littered with loads of random software from TOSHIBA, here is a list:

  + TOSHIBA Assist +.
  + TOSHIBA Bulletin Board.
  + TOSHIBA ConfigFree +.
  + TOSHIBA Disc Creator +.
  + TOSHIBA face recognition.
  + Support utility TOSHIBA Flash Cards +.
  + TOSHIBA hardware setup +.
  + TOSHIBA HDD/SSD Alert +.
  + TOSHIBA Media Controller +.
  + TOSHIBA Media Controller plugin +.
  + TOSHIBA online product information.
  + TOSHIBA Recovery Media Creator +.
  + TOSHIBA Recovery Media Creator reminder +.
  + TOSHIBA ReelTime +.
  + TOSHIBA Service Station +.
  + TOSHIBA supervisor password +.
  + Toshiba TEMPRO +.
  + Package + Toshiba value added
  + TOSHIBA Web Camera Application.

  Is there an ISO image of recovery pre made somewhere or do I have to make my own, because if I decide to unisntall some of these programs, I could need at a later date?

  The second issue is with the TOSHIBA Accessibility application which shows the FN keys, it does not seem to start. He worked the first day then I disabled all startup TOSHIBA applications and I get the following error: "registry is missing or may be broken. ', I don't know why!

  I tried cleaning the registry, as well as the registry is not broken.

  * Thanks in advance *.

  -Olivier

  Hi Olivier,.

  I'm happy to hear that you are owner of laptop Toshiba too and you've discovered the forum here. We can discuss everything on laptops from Toshiba, that s interesting :)

  I'll try to help you resolve this issue:

  1.Yes, there is a recovery image for restore factory settings with all drivers and tools on your laptop but is important burn you this image to a blank DVD using pre-installed recovery media creator. You will get a disc with an image of Windows with all the drivers and tools => settings of the case. Thus, the same parameters as you purchased the computer.

  2.i think that FN keys don t work because you have disabled some important tools Toshiba they are necessary for the FN keys. For FN keys TOSHIBA button Support and TOSHIBA Flash Cards startup items are absolutely necessary, so you should allow them and restart the computer.

• Satellite A300D - create a recovery disk

  Hello
  I have a Toshiba A300D. Recently, I installed the version BETA of Windows 7, wiping my installation of Windows Vista on my laptop, now I don't want Windows 7 more and wants to return to Vista. I still have the recovery partition in drive D, but I don't know how to be: create a recovery from this disk or restore using this straight from the trunk. I tried pressing F11 at the Toshiba flash at startup screen, and who just go to a screen that says "Windows could not start...". "etc, I also tried to go to the Multiboot menu and selecting HDD2, and who does not work either.

  So can someone tell me how I can restore back to Windows Vista, I'm not taken worth losing data as I alll backed up on an external hard drive.
  Where can I get the Toshiva Recovery Disc Creator software anywhere?

  Hello

  He's a bad friend... usually it is not possible to restore the laptop on the factory (in the image of Toshiba) settings if you have removed the Vista HARD drive and not create the recovery disk...

  The recovery disk is THIS essential disk and must be created at the beginning!

  But maybe you're a lucky guy...
  I found this thread with a nice tutorial posted by forum user.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=164927&

  I didn't test it and I don't know if it will work, but I think you're last option... otherwise, you will need to order the Toshiba recovery disc.

• Recent update BIOS maybe bricking M93p tiny systems?

  We just applied this update of the BIOS (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035753) on 4 tiny M93p machines.

  1 the engine is lifting a cursor flashing at startup (brick)?

  3 machines can no longer start on the hard drive.

  In the 3 machines that do not see the hard drive to start, they sometimes show in the boot order in the BIOS, but when you try to include them in the boot order that they disappear.

  Hard drives are a recently Windows 7 64-bit image that worked before the BIOS update.

  If we network boot in PE, we can see the contents of the hard drive.

  Called Lenovo support but I got bounced around... any one see any problem like this?

  Last updated.

  After playing with the main boot order long enough and try different things, I have all 3 machines that were not recognize hard drive at startup to boot in Windows. I got one to Wake-On-Lan, but it does not work on another. Then the other came on the rise after long enough.

  One 4th I called Lenovo and I meet replaced Council.

  So do the updates of tiny BIOS at your own risk!