Flex 10 wake up from sleep with Windows 8.1 problem

Similar Questions

• Computer won't wake up from sleep with Windows 7 sp1 installed

  I have a problem very persistent and annoying.

  My office don't always sleep wake. When you wake the computer, fans turn and everything becomes energized, but the screen stays off. The only option at this point is to press on and hold the power button or turn the power off. Windows does not start, run and shutdown normally, but it fails every time trying to wake up from its sleep. The problem started after I installed Windows 7 service pack 1 and disappears if the service pack is uninstalled.

  I have a motherboard EVGA FTW3 with a Crucial C300 SSD as my main drive. I thought I had found a solution with http://support.microsoft.com/kb/2495523 but it didn't work. My bios is up to date, the firmware is up to date on my SSD and my the Marvell controller firmware is current. I tried to plug my SSD in the Intel SATA ports (and disable the controller Marvell making) but it did not help. I went through every setting imaginable, with the support of EVGA, tried to turn off "Allow hybrid sleep" in the power of the BIOS settings. The only change I found that 'fixed' the problem is uninstall Windows 7 service pack 1.

  My computer specs:

  Card mother EVGA FTW3

  Processor Core i7 980 x

  Memory Corsair Dominator DDR3 1600 (3 X 4 GB)

  EVGA GTX 580 graphics

  Crucial C300 SATA 6.0 Gps SSD

  Western Digital 1 TB SATA 6.0 Gps data drive

  NVIDIA 3d Vision Kit

  I use the latest drivers for all devices because I clean just installed Windows 4 days to try to resolve the situation.

  Beta EVGA Bios recovery mode fixed 80 S3 sleep for me also. Everything seems to work perfectly after that I did the bios flash.

• Wireless power-press when wake up from sleep / restart windows

  Hi guys, help me please. my computer compaq CQ60 laptop have wireless problem. I don't know what is happening. because each start-up/reboot/wake sleep always must press the button power switch wireless... If not press him wireless not function event light is blue. before aready happen like that so I reinstall the windows problem solving. but this time I don't want to reinstall windows >.<.  thanks="" so="">

  Respect,

  Stepanus Lee

  Hello

  Try the following.

  Open windows control panel, open programs and features, right click on the entry for HP Wireless Assistant and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• Windows does not wake up from sleep/hibernate implementation using the mouse button, doesn't work by using the Start button

  Windows used to wake from sleep with the return key or the mouse, now needs to press the Start button on the desktop every time.  I have not changed anything.

  that's happened?   can anyone help?

  Please click the Start button, type security in the search field and then click on "check the status of security" in the list.

  What do you see? make a screenshot of it + post here.

  For example, I have Microsoft Security Essentials and I see:

  

  What do you see when you click on "View installed antispyware programs? Make a screenshot + post.

  For example, I see:

  

  How to include a screenshot, see: http://answers.microsoft.com/en-us/windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476a-85a6-b021181be7e4

  What is the exact name of your Bullguard product?

  Please try to be as specific as possible in your answers, right? :-)

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• keyboard and touchpad does not work once the PC wakes up from sleep/standby

  Please help find the diagnosis and explain in detail what to do with the following problem: keyboard and touchpad for PC with Win 7 Ultimate stop responding when you wake up from sleep/hibernate implementation modes. If you plug the USB mouse, the cursor move again come back to turn off the PC is to reload the OS from scratch. Where to look in the PC software?  Thank you for your competent answer.

  Hello
  I suggest that you follow the steps below and check out them.
  You must be logged on as administrator to perform these steps.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the keyboard, and then double-click the device name.
  3. click on the tab power management and then check the option "allow this device to wake the computer".
  4. click on Ok.
  5 locate the touchpad and repeat step 2 and 3.

  See also: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-power-problems

  You can also try to update the drivers for the keyboard and the touchpad.
  For more information: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support Engineer

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Download error in section Apps Menu of creative machine Cloud Desktop App from Dell with Windows 7?

  Hello

  I am facing the following question while

  Use Adobe Enterprise version > installed my office to the company.

  Download error in section Apps Menu of creative machine Cloud Desktop App from Dell with Windows 7?

  

  RGS

  Am J Singh

  This can also be useful:

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number and that you cannot use my cd.  How can I download this version?

  I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number, but cannot use my cd. How can I download this version?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Adobe Reader 5.0 with Windows 7 compatibility problem

  Adobe Reader 5.0 with Windows 7 compatibility problem

  version 5?

  use the most recent Adobe Acrobat Reader DC install for all versions

  Clear mcafee, unless you are sure you want.

• 10 updated Windows now HP Pavilion won't wake up from sleep

  Since I upgraded to W10 this week, my laptop now wake from sleep.  I searched on the net and so far cannot find people having problems with their laptop in standby.  I followed the advice of one of those on the HP forum, update a driver, that I thought could not wrong.  It made no difference, however.

  When I come to wake my computer, which was always simply lifting the lid, now nothing.  The power indicator lights up in solid and wifi lights up orange (as opposed to his usual white solid while the machine is running).  Other than that, noting.  No tapping of pressing or screen button any it will not bring to life, and the only solution is to hold down the power button to force a complete stop and start again.

  Can be only 3 days into it, but it's already driving me crazy.

  Any suggestions welcome!

  Thank you

  Julie

  It is the way I got it to work.

  I made an iso of windows 10 Microsoft windows 8 and then downloaded factory restore and reinstalled.

  Yes, you will need to first save since you do a factory restore, but so far, he awakens from his sleep when the lid is opened or closed. Also seems faster start and stops correctly also, something he didn't have before. I did not try to roll back to 8 because I've heard of problems this. Don't know if it works for everyone, but it did for me. I hope for good. Will make it count if it changes so no one loses time try.

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.