10 updated Windows now HP Pavilion won't wake up from sleep

Similar Questions

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• Computer won't wake up from sleep with Windows 7 sp1 installed

  I have a problem very persistent and annoying.

  My office don't always sleep wake. When you wake the computer, fans turn and everything becomes energized, but the screen stays off. The only option at this point is to press on and hold the power button or turn the power off. Windows does not start, run and shutdown normally, but it fails every time trying to wake up from its sleep. The problem started after I installed Windows 7 service pack 1 and disappears if the service pack is uninstalled.

  I have a motherboard EVGA FTW3 with a Crucial C300 SSD as my main drive. I thought I had found a solution with http://support.microsoft.com/kb/2495523 but it didn't work. My bios is up to date, the firmware is up to date on my SSD and my the Marvell controller firmware is current. I tried to plug my SSD in the Intel SATA ports (and disable the controller Marvell making) but it did not help. I went through every setting imaginable, with the support of EVGA, tried to turn off "Allow hybrid sleep" in the power of the BIOS settings. The only change I found that 'fixed' the problem is uninstall Windows 7 service pack 1.

  My computer specs:

  Card mother EVGA FTW3

  Processor Core i7 980 x

  Memory Corsair Dominator DDR3 1600 (3 X 4 GB)

  EVGA GTX 580 graphics

  Crucial C300 SATA 6.0 Gps SSD

  Western Digital 1 TB SATA 6.0 Gps data drive

  NVIDIA 3d Vision Kit

  I use the latest drivers for all devices because I clean just installed Windows 4 days to try to resolve the situation.

  Beta EVGA Bios recovery mode fixed 80 S3 sleep for me also. Everything seems to work perfectly after that I did the bios flash.

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

  I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

  I checked the BIOS and power settings are not there. (Version of BIOS F.32)

  I have checked boxes to allow devices to wake the computer in the management section of power without success.

  I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

  I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

  Hello @jpk717,

  Thanks for the information!

  Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

  USB - Windows 8.1 Recovery Kit 64B

  You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

  I hope this helps.

  Have a great weekend!

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• Please help have installed some updates and now the laptop won't restart

  Please help I have installed the updates windows asked what I do, restasrted my laptopp and now it won, t start up. It's show on a black screen! 0xc01a001d! 29371/56275(\Registry\machine\Schema\wcm://Microsoft...) I turned off I tried to leave again in safe mode and last good configuration and it is right on the same scene. feeling pretty desperate now any help please ASAP would be greatly appreciated TO

  my laptop is a SONY Vaio and it runs on Windows Vista Business

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not resolve you would like to repost in the forum update of windows for the best help with this issue of update

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

• HP laptop (Vista Home Premium) won't wake up mode 'sleep'

  My HP Pavilion dv6910us laptop will follow the recommended power options and enter "sleep mode", as you want it or made-to-order... among the STARTUP options or by closing the lid.  However, once he is in "sleep" mode it won't wake up.  The LED on the power button flashes and the indicator on the chassis... but by pressing, open the lid or by touching the keys is useless... he wakes.

  To restart the laptop, I have to disconnect power, remove the battery and then connect the power/insert battery.  Needless to say, it causes Windows down and declare an unexpected shutdown during the power upward.  I did the research many resolutions... currently, my best solution is to change the power options so that when plugged the laptop doesn't go to sleep and then if I disconnect I have to shut it down... Rather, I don't have to go through this hassle all the time.

  I've followed many troubleshooting procedures... Updated BIOS update... Updated graphics driver... I even tried a "clean boot"... no additional services except for Windows services and has always had the same problem.

  Please... Help!

  This link solved my problem

  http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html?filter [11]

• Lenovo L420 wakes up from sleep after upgraded to Windows 8

  I have a Lenovo Thinkpad L420, which I have recently upgraded to Windows 8 (it was purchased with Windows 7 installed).  Now, the computer will be no wake mode 'sleep', I need to restart everytime I try to wake up from its sleep.

  Hi all, thought I'd post an update. As MadsDad said, Yes, there is a new BIOS that resolves this problem. I finally got a blockage of an engineer at Lenovo and we worked together to build the new BIOS. This update solves also sporadic freezing problems than some models also known. Its here
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS013626

• Windows does not wake up from sleep/hibernate implementation using the mouse button, doesn't work by using the Start button

  Windows used to wake from sleep with the return key or the mouse, now needs to press the Start button on the desktop every time.  I have not changed anything.

  that's happened?   can anyone help?

  Please click the Start button, type security in the search field and then click on "check the status of security" in the list.

  What do you see? make a screenshot of it + post here.

  For example, I have Microsoft Security Essentials and I see:

  

  What do you see when you click on "View installed antispyware programs? Make a screenshot + post.

  For example, I see:

  

  How to include a screenshot, see: http://answers.microsoft.com/en-us/windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476a-85a6-b021181be7e4

  What is the exact name of your Bullguard product?

  Please try to be as specific as possible in your answers, right? :-)

• Flex 10 wake up from sleep with Windows 8.1 problem

  I installed Windows 8.1 but have a problem with the wake up the computer from sleep mode. Someone else the problem?

  
  

• No sound after updating Windows on HP Pavilion g6 8.1

  PC updated for Windows 8.1 today and now have no sound at all and the pc says without a helmet or the speakers are plugged and detection detects without problems and also the 'properties' of AMD say sevice work properly (I have no drivers back back to list)

  HP Pavilion Notebook PC g6

  Product C6M11EA #ABU number

  8.0.0.8807 driver version

  What can I do to get her back?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59620.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the laptop by pressing the SHIFT key when you click farm to temporarily prevent a hybrid boot.

  When the laptop stopped, disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• I turned off my computer vista accientally when she was updating windows, now computer stuck at 'Configuring updates step 3 of 3. "

  and now whenever I start it up it goes from an expression of the form "Configuring updates step 3 of 3" then it fails and restarts and goes to the screen even. Help!

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Since the last update, windows Explorer (start bar, windows, etc.) won't start when you wake up from sleep.

  17/09/2012

  Since the last automatic update, my laptop won't automatically sleep when the lid is closed. And when opened the lid of his sleep, there is no current windows; No start bar, no application. So all I can do is ctrl alt del or start L so I can restart my laptop.

  I think that the last update caused this, since there was no prior dysfunction. .

  popular considerations. .

  JLL

  Notice: I discovered that the problem was not caused by updates, but by instant replay. Disregard this message...

  Thank you.

• Father has not installed the latest update. Now its ipad won't let him.

  My father didn't download the updated ipad. Now he's not let him? It is said that it is up to date, but it is a patch behind. There is no install when it was lit on its home screen. There are probably three weeks. Now its iPad isn't work correctlly. He said that it is up-to-date. It is not the case. He is one behind.

  Try resetting the device- restart your iPhone, iPad or iPod touch - Apple Support