Flex 2 14 (58429728) full HD... MOTION CONTROL S/W

Similar Questions

• Activation of IdeaCentre A740 Motion control

  I recently bought Ideacenter A740, but could not activate function of control of movement (gesture). Could someone tell me what to look for and any instructions to follow.

  If you need to download Lenovo Motion Control to win 8, you can find it here:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-Pro-Lenovo/download...

  Thank you

• Problem with motion control

  I have a Lenovo Ideapad Yoga and there is a problem with my order of movement. A pop up window says: 11 hand Form Load Failed. motion control cannot start: what should I do then?

  assybish wrote:
  I have this problem too what update to windows 8.1 looks like part of the program of control of movement broke out during the upgrade (as did several other - Bravo M * you) have tried Lenovo support and their stock answer to every problem is factory reset and return to windows 8 (and lose all your installed programs (, etc. >!) If any staff of Lenovo never read this please get a grip going back to win 8 is not the answer! Lenovo should provide for download or via a software of rescovery dvd for their applcations.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS041312

• Lenovo U430 Touch Motion Control Software

  To the right (Lenovo)

  I had to uninstall my software of motion control for my U430 Touch software error.

  I see that's not anywhere online, if it is not too much trouble Lenovo put the software either

  here or on the Web page of drivers?

  Thank you very much

  DesertFox899

  Try this package:
  http://support.Lenovo.com/en/downloads/ds100323

• Optimize the image to full screen 2D control

  Hi, I'm update programmatically control of 2D image to full screen size.  Is there a way to do this?

  I know that you can maximize the façade to the fulll screen but I have been unable to develop a method which allows me to do that for a 2D image control.

  Thanks for your help!

  You can adapt the 2D image control to the front of your VI by selecting (using right-click) 'Fit Control Panel' and then 'ladder with component object. If you will maximize the VI, control of the 2D image display screen.

• motion control for vertical actuator and data acquisition

  Hello

  I am a researcher (a branch of civil engineering) geotechnical engineering and I have very little knowledge about the acquisition of control and data motion, so would need a lot of help from the experts OR. I have only knowledge base on these 2 aspects based on my reading of some materials on the Web site of NOR and youtube videos, so I hope that you bare with me . Here are my questions:

  I am trying to build an actuator which will be used to push a probe (a penetrometer with a load cell to measure the resistance of a soil sample), resembling the concept, photography in the attached file. I need to have these criteria for my system:

  (1) actuator, which can push the probe at speeds between 0.01 mm/s - 300 mm/s with precision and move the probe cyclically (upwards and downwards) in the vertical direction
  (2) load expected on the probe into the ground range: 0.02kN - 6 kN.
  (3) necessary to get the load cell load data and the speed of the probe.

  4) able to control the actuator to a PC (speed and posotion) and monitor data from transducers and data log time even the transducers.

  Guess my beginners is that I will need:

  For orders:
  (1) software - LabVIEW and NOR-motion assistant

  (2) controller - NI PCI-7342

  (3) driver/amplifier - analogue servo AKD Drive

  (4) motor - motor brushless servo AKM

  For the acquisition:
  (1) software - based LabVIEW development systems

  (2) amplifiers or other device - no idea what type on the conditioning of signals

  (3) data acquisition device - no idea what type

  Since I'm a beginner, is - that someone might recommend components (hardware and software) for the control and data acquisition. I'm on a tight budget, so I thankful if someone could help me to recommend components good enough to build my system.

  Thanks for your help.

  At these rates, you will need to run the sensor for the cDAQ.  You can configure the analog output on the Tritex nationally on the position.  There is an adjustable filter that you can set in order to get a clean enough to 300 Hz signal.  When you learn about the Tritex, make sure that let you them know what comms and e/s that you want to use.  If I remember, not all options have worked together.  The analog output may need to be my, but you can put a resistance through the acquisition of input data to get the voltage instead.  I don't remember all the details.  You should really not too much on the Tritex/LabVIEW side.  You will send your movement parameters (beginning of end of race, speed, position, accel, cut), and if you cycle (I believe you) or simply running in a loop.  You could also just be able to use the functions of jog.  When you get close to knowing exaclty what you need, PM me and I'm sure we can work something out with the drivers.  You need only the basics.  In fact, you could probably do this all your movements via digital and analog i/o.

• Oracle inventory - full update batch controlled item to any batch control interface

  We try to update your status many articles that he and here are the details

  A - Lot control is controlled full / batch active state is defined as Yes and default id batch status is set to Active.

  Requirement is updated as much - control number in Lot, Lot active state - only and by default a lot State Id - null.

  We try to insert some values into MTL_SYSTEM_ITEMS_INTERFACE with lot_control_code = 1, lot_status_enabled = N and default_lot_status_id = NULL, but get an error that many default status can be activated for that much elements enabled.

  The combination being passed is invalid according to the features of Oracle but no idea why failure. Thanks in advance.

  Heeeey,

  Try to entrust this value - 999999

  Going to work

  1. for numeric fields: Insert-999999

  2. for the characters of the fields: Insert '!'

• Resize the Extension Panel is not Flex at all, simply scales stage layout controls

  Hello

  I have this problem with Extension panels in Fireworks compiled with the Flex 4 SDK. When the Panel is first opened, it has the right dimensions and orders are prepared correctly. If I resize at all, he starts instead of prepare its controls to take advantage of the new space. Appears not to occur when you use mx:Application Flex 3, Flex only 4. Any ideas?

  Before resizing:

  

  After resizing:

  

  In this case regardless of the container Application control that I use - mx:Application, mx:ApplicationWindow, cs: CSXSWindowedApplication and so on.

  My MXML Application is as follows:

  <?xml version="1.0" encoding="utf-8"?>
  <cs:CSXSWindowedApplication
    xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:cs="com.adobe.csxs.core.*" xmlns:s="library://ns.adobe.com/flex/spark"
  
    <!-- Setting width & height are the only way I can get it to show properly when first opened. -->
    width="200" height="200" historyManagementEnabled="false" showStatusBar="false">
  
    <s:Button label="Click Me" />
  
  </cs:CSXSWindowedApplication>
  
  

  So they key is apparently to have this as an indicator of the compiler:

  -includes=mx.managers.systemClasses.MarshallingSupport
  

  And in applicationComplete:

  CSInterface.instance.autoThemeColorChange = true;
  

  Also use CSExtension as your base class/component application.

• Maybe Flex SDK bugs: visible converters element DataGrid control

  Hi all, I'm still a noob to flex, but this seems a little strange to me.

  I tried to hide a converter button in a DataGrid control, but he would just hide.  I was setting visible inside the mxml and also in the class that extends the buttonbut would just hide.  Then, I overloaded the property visible set/get back what was setting the property and found that inside the DataGridBase.as the setupColumnItemRenderer function sets still visible of the renderes to true.

  DataGridBase.as

  protected function setupColumnItemRenderer (c:DataGridColumn, contentHolder:ListBaseContentHolder, rowNum:int, colNum:int, uid:String, data: Object): IListItemRenderer { var listItems:Array = contentHolder.listItems; var point: IListItemRenderer; var rowData:DataGridListData; Item = listItems [rowNum] [colNum]; If (! point | itemToUID (item.data)! = uid) || columnMap [item.name]! = c) { Item = createColumnItemRenderer (c, false, data); If (point == null) Returns a null value. If (item.parent! = contentHolder) contentHolder.addChild (DisplayObject (item)); a space is used if there is no so text widgets get a default size columnMap [item.name] = c; If (listItems [rowNum] [colNum]) addToFreeItemRenderers (listItems [rowNum] [colNum]); listItems [rowNum] [colNum] = item; } [Mat] left in the above block out because the element is without a doubt at this stage and still need its up-to-date information rowData = DataGridListData (makeListData (data, uid, rowNum, c.colNum, c)); rowMap [item.name] = rowData; If (item is IDropInListItemRenderer) IDropInListItemRenderer (point) .listData = data? rowData: null; Item.Data = data; item.Visible = true; If (uid & & colNum == 0) contentHolder.visibleData [uid] = item; return item; }

  Why would he do that?  If it should not respect the visible property for the mxml rendering engine already set and not force it to true on init?

  Converters use the visible property to recycling.  Invisible rendering engines are not supported.  The attack detection logic he would find the cell, it belongs to the same if it were invisible.  You can set alpha = 0, but that does not block the attack detection logic.

  Why are you trying to hide a converter?

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Windows driver 3 11 motion control 10 Yoga

  Unfortunately I lost the control of movement/gesture after the upgrade to windows 10

  Continue to check the drivers lenovo lenovo Web site... nothing

  There's always a gesture control for compatible with windows 10 3 11 yoga

  All software is still on my pc, but nothing works

  Thanks if anyone can enlighten us

  Lenovo Transition software used to be available on the site Web of Lenovo 1170, but Lenovo have excelled themselves again and removed this essential piece of software from the site Web 1170. Not content with this Lenovo have also not their driver to trackpad-synaptics on their site of support of 1170 updated driver synaptics real work which can be downloaded from the site Web Lenvovo 1370.

  It's almost as if Lenovo are purposly screwing of support to older models of computer to devalue their.

  Transition from Lenovo will be probably available somewhere, preferably a Lenovo Web site. I suggest you Google "transition lenovo." The first result of the search seems to be legitimate. The URL is:

  http://support.Lenovo.com/GB/en/downloads/ds038767

  But there may be future versions of Lenovo's Transition available on the web.

• How to set the speed with XPS motion control

  Hi guys,.

  I put a LabView VI to State micrometer two control via a movement XPS controller. I need States to query with different speeds, but I can't find a way to do it, any ideas?

  G.

  P.S. sorry for my English mistakes is not my native language

  Hi I finally found my out of this issue using the PosSGamaParameterSet block.

• Generation of impulses associated with Motion Control

  Hello

  I'm currently controlling a stage prerequisite microscope with Labview, through a serial port.  LabVIEW communicates via the active X functionality to the control of the stage box.

  I would like to be able to integrate a feature of external impulse generation in the system.  So, I wonder what kind of material, I will need to do this?  The pulse should be about 5 V in amplitude and in the range 1-20 Hz.

  Finally, I wish to cordinate movement of my turntable of the microscope with the external pulse generation.  Have some sort of feedback would be important as well.

  Thank you for your help.

  Mike

  Thanks Dan.  I appreciate your advice.    I have also received feedback from my local field engineer and identified which device will work best for my needs.

• Command of RC Servo motion control/KollMorgen AKD Modbus

  I'm just learning about LabView on a project to control a RC Servo.  I have implemented a train VI with a USB-6210 pulse generator and you can control the position of the servo using a button control.  I want to be able to program the movement of the servo to follow a sine, square and triangle wave.  I tried to use the function VI generator to generate the signal but can't get the servo to move.  Someone can give me some tips on how to generate the desired waveform and use it to vary continuously the duty cycle of the pulse train?  I thought that it would just to replace the button with the function of driving control?

  My ultimate goal is to use the concept of driving a car KollMorgen AKD using Modbus to perform a similar function.

  The express VI allows you to simulate the sinusoidal signal only circulates once only 1 data point out.  In order to run continuously, you need to place inside a loop.  I don't see an interest to use a local variable for your PWM control button.  Should he wire directly to the vi "Not equal?" inside the loop.  If you try to replace the control of knowledge with the sinus generator then you must put the generator sined inside the loop and the wiring that directly to the where you have connected PWM local variable.

• RS232 driver vi for Advanced Motion Controls Digiflex Performance Servo Drive

  I was wondering if one has developed a driver vi rs232 to control a servo Digiflex AMC. I'm not a guy aware of rs232 driver and this seems the only way to control this Driveware drive other than using the software supplied with the player. There are a few control files that are labeled Active X, but in fact do not work with the property to invoke. The Protocol series "focuses on the character, binary, master-slave." After calling the record company their guru said he knows of only Labview Guy who took this task and has been a success. The only information that it could give me was that he lived in the (San Francisco) Bay area.

  Thank you

  MCE

  MCE,

  Unfortunately, our collection of instruments (ni.com/idnet) driver has not all the drivers for your device from the CMA.

  You can still use LabVIEW to communicate via RS232 to your device. You will get to know very well the manual of your device programming here are some other links that may be useful:

  General concepts of Serial Communication

  Instrument control tutorial series

  Kind regards

• How better to organize Flex Builder projects within a source code control system?

  Hello world

  I'm working on a team of average size of a company product developers who will use Flex on the front-end, remote access services for Java objects on the server, etc.

  Right now, I just created a sample application with a Flex Builder in Eclipse project and the use of WTP.

  I'm looking for advice or suggestions on the best way to organize a large Flex/Java project for the team with subversion, etc.

  Is it wise to record all of the Flex Builder project (i.e. files properties etc..)?  Our development environments will be identical, because they will be the virtual computer images.

  I did a lot of research and found a few bites, but I thought I'd see if I could get feedback from other people who have experience with this or are organizing their code source etc.

  Thank you very much

  FortPointUIGuy

  1. Yes. Note that once Java and Flex in the same project, I first had to create a Java project, and then something like Flex Project Nature > add Flex Project Nature. Try to do the reverse (start with a Flex project and add the Java code) worked for me.

  2. it's been great. Franck Wolff, the lead developer, has been very sensitive on their forum (even with stupid questions that were actually my fault). He added that some requested features for as3 Enums, and overall we were pretty happy. We do not actually use the fanciful granite features (other than his actionscript generator gas3 of objects for the AMF client-side); We use it mostly just because we moved to her before the Blaze. However, we have no intention to the flame.

  3. Yes, throw us just jars of granite in our war, although maybe this isn't the right thing for everyone. We have a heavy enough demand, so we can dominate the server simply assume. It worked well for us, althoough I do not think that we have already shared our tomcat with any other web apps, YMMV Yes case.

  And no problem - glad you help.