Floppy drive appears in Windows Explorer on a virtual computer, but not on the summary page

Similar Questions

• Windows Explorer stall when open file when not on the field

  When I'm at work all work very well.

  But if I work at home or another with internet connection (the two wire / wireless)

  When right clicking on the file extension (.doc .xls .all), Explorer of stall for 30 seconds.

  I check the connection of the netstat command, it shows that my laptop trying to connect with my corporate domain name (but it may not)

  But find everything if I use the command open in Word or Excel or open the attachment in Outlook.

  This happened since I have this laptop (pure install first).

  Several virus scan I try, but found nothing wrong.

  Disconnect all the card reader no help

  You have an idea?

  Hi Danupop,

  ·        This only happens with Microsoft Office files and applications?

  ·        Were these files stored on the network earlier and more later copied on this computer?

  ·        Should it behave the same way with files that have been created on the local system?

  However, you can try to configure your computer to use offline files.

  To configure your computer to use the offline files feature:

  a. Click Start and then click my computer.

  b. on the Tools menu, click Folder Options.

  c. click the offline files tab.

  d. Select the enable offline files check box, and then click OK.

  Access the link below to find out how to configure your computer to use offline files.

  http://support.Microsoft.com/kb/307853

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro 64-bit computer, can not change the sharing

  My problem is much more complicated, but I'll start with this simple question.

  While trying to see my Win 7 Pro from my Home of Win 7 32-bit laptop, I shared the C drive, the other car tie and users.

  All this while you are trying to use the Canon MP500 printer attached, also shared.

  I don't see the elements of theses on the laptop saying no permissions.

  They are on the same network of working group. Ping is OK.

  I can see all shared folders on the machine Win 7 Pro, as well on the Win 7 computer laptop and another XP machine.

  Now how the hell can I, for starters, unshare above.

  Win 7 Pro said, the help section, but I do not understand this, (using MS Explorer to get there) SEE MY OTHER SCREEN SHOT LOWER down

  YES, I know I'm on a working group, and that said home group, but surely. SOMEONE HELP. ? It's frustrating and c not easy. How do you get the new share with Menu?

  I see the screenshots do not work, but the part with tab on my 7 came with 'Advanced sharing' only.

  Hello Peterde,

  Thanks for the reply and sorry for the delay in response.

  If it is not necessary for you to share files on your computer with other users, disable file sharing.

  Otherwise, if you need to allow some users access to certain folders on your computer, you can configure permissions to allow sharing of files limited, protected by password.

  Disable file sharing

  1. On the Start menu, select Control Panel, and then click network and sharing Center.
  2. In the left panel, click on change sharing settings, advanced and then click the arrow next to home or work.
  3. Check the following settings:
     • Network discovery: Off
     • File and Printer Sharing: Off
     • Public folder sharing: Off
     • File sharing connections: use 128-bit encryption...
  4. Click on save changes.

     

  For more information, I would ask allows you to check the link provided below.

  http://TechNet.Microsoft.com/en-us/library/cc753475.aspx

  Hope the helps of information provided. Let us know in case you need more help.

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Help: Floppy Drive gets error "Windows - no disk Exception Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c treatment".

  Dell Deminsion 3000, Windows XP Pro SP3, Version 2002, Pentium 4 processor 2.8 GHz, 2.00 GB of RAM disk Y-E Data YD - 702D

  A: floppy drive appears in my computer and in Device Manager where you can read it and the controllers are working properly.  But the diskette in the A: drive is not visible in disk management.  I tried UN-installing, re-installing and updating readers.  I also did that the BIOS was set to Auto & 1.44 3.5.  What can I do to fix this?

  Hello

  This problem seems to be caused by software conflicts or by malware (virus or spyware etc.).

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the scan on the computer online and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• [SOLVED] Optical drive empty missing in Windows Explorer, but not in the folder of the computer or Device Manager. Windows 7 x 64 HP Pavilion dv6-3032tx

  The problem: the optical drive [cd/dvd burner] icon is missing in Windows Explorer when no media inserted in the drive. Even if the optical drive icon in Windows Explorer when a disc is inserted in the drive.

  However, the optical drive appears in 'Device Manager' and in 'Computer' folder or no media is inserted in the reader as to the latter.  This doesn't seem to be a hardware problem.  It is a Windows 7 problem [or character?], which seems to be set [or omitted] in Windows 8.

  Here are the step by step process to solve this problem:

  1. open Windows Explorer [click on "Start" and type "Windows Explorer" in the search box, then click on the first result to the Summit, which is "Windows Explorer"]
  2. in Windows Explorer, click on "Organize" (top left of the window).
  3. in the click from the drop-down list 'folder and search options '.
  4. at the bottom of the window that comes up, under the "Navigation" tick to choose 'show all files '.

  I need to do this every time I have to reinstall Windows 7 x 64 Home Premium on my HP Pavilion dv6-3032tx laptop.

  I hope this helps someone. Wellness wish all

  Hello

  Thanks for sharing the solution. Hope this fix helps the other forum users encounter the same error. In case you are having other problems with Windows in the future, feel free to post your request here on the Windows community, we will be more than happy to help you.

• I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.

  I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.  My question is what should I do to upload my pictures?

  Hello

  What brand / model of the phone?

  You try to connect the phone to the computer wired or wireless?

  Try the methods provided and see if it helps.

  Method 1:
  Check out the link and follow the steps.

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 2:
  Check out the link and follow the steps to install the drivers for the device.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can also visit this link and follow the steps.
   
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
   

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• Acrord32.exe (Windows 7 and Acrobat cc) breaking, can not save the changes, Windows Explorer crash earlier

  Recently decided to upgrade to Acrobat DC after discovering that she will allow me to OCR files that previously forced me to spend of TIFF, and then back.

  I downloaded the program and installed today.  I was the conversion of Acrobat 9.  After that I started uninstalling Acrobat 9 Pro, Windows Explorer has started crashing.  I finally restored the computer

  I checked the Microsoft forums to see what could have gone wrong, and they seem to indicate that I should run sfc in the prompt, then see if there are problems in the registry. Here, of course, began with today or yesterday (which doesn't make sense - not sure that the report gave me irreparable files, or both fixed and fixed, or what). Other research suggests that I do a disk cleanup, and since then I had the problem of Windows Explorer.

  I tried then just install Acrobat DC on Acrobat 9.  This seemed to work properly.  However, now I have problems with Acrobat to crash (although the window remains open?). The message says that acrord32.exe is the culprit.  In addition, a number of my PDF files cannot be replaced - if I want to save my changes, I have to save to a different folder, delete the old file and move the other in its place.

  It's basically a nightmare, and I lost a ton of productivity today putting out fires.  Do not have these problems until I started playing with Acrobat.

  Please give me some suggestions.

  Thank you

  In fact, I could hope to find the solution on this thread:

  Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  Going to see how it goes with the preview pane disabled (although she will suck if I can't use TI - hope you guys who patch).

  Also, add a folder by the instructions under C:/User / [USER] / AppData.

  In the hope that this problem will be solved in between.

  EDIT: It looks like it fix the problem.  Acrobat Pro DC now works without any problem.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• This computer does not meet the minimum requirements... when installing graphics Intel HD 4000 for my Dell Vostro 5560 with Windows 7 64 bit

  In recent days, I reinstall Windows 7 to my Dell Vostro 5560 and this laptop does not have a driver CD, I downloaded all the required drivers for my laptop directly from the Dell Support Web site. I started to install a step by step. Chipsets, Audio, network, MEI, etc... However, once I try to install graphics, this laptop comes with 2 graphics card, an Intel and another is Nvidia. So, I try to install first Intel. When I click on the exe file, a message box appears saying that «this computer does not meet the minimum requirements...» ». Why is - what happened? I'm sure that my laptop include Intel graphics. Please help me as soon as POSSIBLE. I want to install Windows 7.

  Some drivers of today require at least Microsoft .NET Framework 4.5. Is this possible?

  It is certainly. AMD demanded 4 .NET. x + for their installer drivers for several years already, but I think they have started including with their driver downloads recently.

  -I never noticed if Nvidia use .NET with their drivers Installer, install but .NET 4.5.

  Download Microsoft .NET Framework 4.5 of the official Microsoft Download Center

  .

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Intel HD graphics driver installation error: "computer does not meet the minimum requirements.

  Hello

  I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error:

  "This computer does not have the minimum requirements for installing the software.

  I have the following: dv6-6b05tx laptop computer running windows 7 pro 64

  It's the device I am trying to update:

  Intel HD Graphics Family
  Current driver date: May 7, 2011
  Current version of the driver: 8.830.6.3000

  I tried the drivers on the Intel site, but they do not work either.

  Help, please.

  Thank you very much.

  PS

  I managed to update the drivers of AMD Radeon HD 6700M using this link of guru3d.com.

  But I can't find a similar solution for the Intel card.

  Hello:

  Please read the notes on the AMD driver file...

  Description:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  The Intel driver is only for the models with only the Intel UMA graphics adapter.

  You must live with what version of the video, Intel is in the AMD driver package.

  Paul