Similar Questions

• Go mobile: Go off and code admin

  My moms go computer laptop comes with disabled code 82011747
  No idea how to get past here would be great.

  @Katex2

  Enter: 33979389

  Kind regards

  DP - K

• I am unable to do anything about this either with my hard drive as it continues to flow upward code 19 or 32

  is there anyway you could help me solve this problem

  After an update, this sometimes happens.

  Try this >http://go.microsoft.com/?linkid=9645377

  The Microsoft FIX IT utility.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Stream 11-d010 HP: hp 11-d010wm flow admin forgot password, code 59577103

  have a hp reset flow request password admin or power on password, never put a. Try three times and give the code

  59577103

  any help is greatly appreciated! Thank you!!

  @videogamewizard

  Please enter:

  46455125

  Kind regards.

• HP Jet 7: administrator or power on password

  I have a HP 7 flow requesting an admin or a power on password. It says system off now with code: 50518680

  @KrisMacron

  Enter 45470206

  Kind regards

  DP - K

• NI-DAQ-200288 digital output error

  Hi all

  I am using Matlab control PCI-6534. In the code, I try to write not Npulse (= 3). Pulse. Data of the pulse are of size 1 X 1e5. When I try to write in the mode of generation of finite samples it generates error-200288 when you write data pulse 3rd time. 1 twice, it gives no error.

  The flow of code below is 1. Open 32-bit channel to write digital data to the 10 MHz clock.

  2. put sample over genration and disabel regeneration.

  3 write first pulse data to buffer.

  4. start the task

  5 enter the number of data pulse Npulse-1 immediately

  6. wait until the task is done and stop the task

  CLC;
  inputDATA = uint32 (100 * randn(1,1e5));
  NPulse = 3;
  rate = 1e7; % 10 MHz

  If (libisloaded ('myni') ~ = 1).
  [notfound warnings] = loadlibrary ('nicaiu.dll', 'C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h','alias','myni');
  end
  taskh = libpointer('voidPtrPtr',0);
  DOtaskhandle = taskh;
  [errCode, taskName, DOtaskhandle] = calllib ('myni', 'DAQmxCreateTask', ", DOtaskhandle);
  DOtaskhandle.setdatatype ('voidPtrPtr');

  DAQmx_Val_ChanForAllLines = int32 (1);
  DAQmx_Val_Rising = int32 (10280);
  DAQmx_Val_GroupByChannel = uint32 (0);

  DAQmx_Val_FiniteSamps = int32 (10178);
  DAQmx_Val_GroupByChannel = uint32 (0);
  DAQmx_Val_DoNotAllowRegen = int32 (10158);
  numSampsPerChannelWritten = libpointer('int32Ptr',0);
  reserved = libpointer ('uint32Ptr', []);
  data2 = libpointer ('uint32Ptr', inputDATA);
  sampsPerChanToWrite = uint64 (numel (inputDATA));
  inDataLen = uint32 (numel (inputDATA));
  sperchan = uint32 (inDataLen);

  [errCode, lineNames, nameoflines] = calllib ('myni', 'DAQmxCreateDOChan', DOtaskhandle, [' Dev1/port3 Dev1/port1, port2/Dev1, Dev1/port0], ", DAQmx_Val_ChanForAllLines);
  [errCode, clockType] is calllib('myni','DAQmxCfgSampClkTiming',DOtaskhandle,'OnboardClock',rate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,sampsPerChanToWrite);
  If (errCode ~ = 0)
  errMessage = "Error during clock setting";
  calllib ('myni', 'DAQmxStopTask', DOtaskhandle);
  calllib ('myni', 'DAQmxClearTask', DOtaskhandle);
  return;
  end
  [errCode] is calllib ('myni', 'DAQmxSetWriteRegenMode', DOtaskhandle, DAQmx_Val_DoNotAllowRegen);.

  [errCode, writeArray, numSampsPerChan, zz] = calllib ('myni', 'DAQmxWriteDigitalU32', DOtaskhandle, sperchan, 0, double (10), DAQmx_Val_GroupByChannel, data2, numSampsPerChannelWritten, reserved);
  If (errCode ~ = 0)
  errMessage = "Error when writing the data of Stimulation" 1;
  calllib ('myni', 'DAQmxStopTask', DOtaskhandle);
  calllib ('myni', 'DAQmxClearTask', DOtaskhandle);
  DISP (errMessage);
  return;
  end

  [errCode] = calllib ('myni', 'DAQmxStartTask', DOtaskhandle);
  if(errCode~=0)
  errMessage is ('error in startup DAQmx task');.
  calllib ('myni', 'DAQmxStopTask', DOtaskhandle);
  calllib ('myni', 'DAQmxClearTask', DOtaskhandle);
  DISP (errMessage);
  return;
  end
  for i = 1:NPulse - 1
  [errCode, writeArray, numSampsPerChan, zz] = calllib ('myni', 'DAQmxWriteDigitalU32', DOtaskhandle, sperchan, 0, double (10), DAQmx_Val_GroupByChannel, data2, numSampsPerChannelWritten, reserved);
  % If (errCode ~ = 0)
  % errMessage = "Error when writing the data of Stimulation";
  % calllib ('myni', 'DAQmxStopTask', DOtaskhandle);
  % calllib ('myni', 'DAQmxClearTask', DOtaskhandle);
  disp (errMessage);
  % return;
  end %
  end

  IstaskDone = libpointer ('voidPtr', logical (0));
  [A11 A21 A31] is calllib ('myni', 'DAQmxIsTaskDone', DOtaskhandle, IstaskDone);.

  while(A31==false)
  [A11 A21 A31] is calllib ('myni', 'DAQmxIsTaskDone', DOtaskhandle, IstaskDone);.
  end

  calllib ('myni', 'DAQmxStopTask', DOtaskhandle);
  calllib ('myni', 'DAQmxClearTask', DOtaskhandle);

  Can anyone help me please with this code. Is there some step I'm missing or not setting any parameter not?

  Thank you

  Vani

  Take a look at this:

  Why do I get error-200288?

  http://digital.NI.com/public.nsf/allkb/BFCE83133C0ECAD786256E6000814B68?OpenDocument

  Using traditional DAQ or DAQmx?

• Why LabVIEW example projects using Global Variables?

  I'm puzzled.  I've been pretty good programmers LabVIEW talks (including some who work for the OR) and came away with the impression that Global Variables should, as a general rule, be avoided, with functional Global Variables (alias VI Globals) generally preferred for "local memory".

  I have studied some of the example distributed with LabVIEW, 2012 and 2013, in particular the proposed acquisition in real time and am struck by the use of Global Variables, where I'd be inclined to use instead a FGV.  For examples, to stop all the loops on the RT target, the overall "All the RT loop Stop" is defined; 'Constants' of configuration (such as timeouts, Streme network names, the names of the journal folder) are kept as Globals; Streme network endpoints are stored in Globals.

  [Note - there is a weird spelling of the second word of the network Streme, above - when I tried to post with the correct spelling, I got an error message saying this word is 'not allowed in this community".]  I apologize for the offense, but I must confess that I do not understand what the problem with the help of the spelling of this word...]

  Why use Globals in these cases, rather than write a bunch of VIGs to hold these data?  Note that almost all these Globals are 'Read' essentially (written once when a resource is acquired, for example) or "Read Only" (treated as if they were a constant).  Indeed, read-only variables can be written as a Subvi with only an output terminal, acting as a (visible, due to the icon) constant.

  I can see advantages to this approach.  On the one hand, VIGs can have error bounds who run the data flow (I just spotted a bug "data flow" in code, I am developing that is based on this model, to read configuration data to an XML file in a world and in the same VI, Global wiring to a "use - me" terminal, but with no guarantee that I'll read the overall after I write it).

  It is, I suppose, a matter of 'speed' - perhaps Global Variables are 'faster' than VIGs (especially if the VIG 'sits' on an error line).  My thought, however, is that this difference is likely to be trivial, especially as these VIGs (or Globals) tend to become "occasional" calls (with the exception of the indicator 'all the loop Stop' which is called once per line).

  Are there other arguments or considerations that make a Variable global to a better choice than a VIG?  Is there a reason that LabVIEW developers put in these start-up of projects LabVIEW?

  BS

  I have to ask, how do you use functional Global Variables?  Like just a Get and Set?  If so, you can use a global variable.

  Yes, globals are faster and use much less overhead.  At the summits of CLA in recent years, we talked about using globals.  The most common use is for Write-Once-Read Many and writing-never-Read Many with configuration data.  It's a good idea to use globals with the constants that can change on you.  It turns out that the world will have the same performance as a constant in this case.  This is done so that you don't have 1 place to edit the 'constant '.

  The rule on "Globals are evil" actually goes back several years when NEITHER had the huge "people of the country are bad" vendata.  But NEITHER explains well how to do things properly.  So I found people, instead of using local variables, using the value property node.  It's even worse because the property causes thread swaps and kills your performance.  It wasn't until I shouted to people to use wires and shift registers I have seen improvements in the way in which people wrote their code.  So people are always riffling in the use of globals and decided to use FGVs with the EEG and fixed rather cases.  But this does not solve the problem of the conditions of race with critical data and you cause an additional burden.

  So from my experience, I use globals all the time for configuration data.  Yes, you must be careful about the race conditions.  But as long as you understand that it is a common and useful practice.

  I would not use a global variable for data that are constantly changing (use registers to offset or Action motor) and/or processes that have critical sections of code (use a motor of Action).

  NOTE: I use the definition of Mercer to FGV (a Get/Set only) and motor Action (many cases which specifically affect the data).

• HttpConnection doesn't work (with username and password)

  I'm trying to get the tweet content (where I login account, say 'username' and 'password')

  using the rest of the code and does not work.

  According to the flow of Code, I do not get the answer for the POSITION

  Int State = httpConn.getResponseCode ();

  I tried to capture an Ethereal trace on my laptop and I don't see any HTTP POST also.

  So I think that I get no response to the HTTP POST.

  I don't know what the problem is. Is there any problem in SET UP?

  I use the Simulator (9550). Version of the JDK BlackBerry 5.0.0.14

  Note: If open the browser in the Simulator and use the same URL that is used in the Code, I get answer and ask user name and password. Once I entered the username and password. I get valid data to tweet.

  Can someone help me in this context

  class SocialContentMessage extends Thread {
  
      private String _AuthenticationHash;
      private String _CompleteUrl;
      private ExtendedTextBoxField _MessageField;
  
      public SocialContentMessage(final ExtendedTextBoxField messageFieldLocal) {
          _MessageField = messageFieldLocal;
          _AuthenticationHash = getAuthData("username","password");
      }
  
      public void run() {
          getUpdates("http://twitter.com/statuses/friends_timeline.xml");
      }
  
      private String getAuthData(String userName, String userPassWord) { 
  
          // Update authentication hash from current userName & userPassWord.
          byte[] toEncode = (userName + ":" + userPassWord).getBytes();
          ByteArrayOutputStream newHash = new ByteArrayOutputStream(toEncode.length);
          Base64OutputStream base64OutputStream = new Base64OutputStream(newHash);
  
          try {
              base64OutputStream.write(toEncode, 0, toEncode.length);
              base64OutputStream.flush();
              base64OutputStream.close();
          } catch (IOException ioe) {
              // Null out hash.
              newHash = null;
          }
  
          // Set authentication hash, clear password.
          return newHash.toString();
      }
  
      private final void getUpdates(String url) {
  
          try {
  
              // Open stream and poll data
              // Create post data
              URLEncodedPostData post = new URLEncodedPostData("", false);
  
              // Create connection
              StreamConnection s = null;
              _CompleteUrl = url + "?" + post.toString();
              s = (StreamConnection)Connector.open(_CompleteUrl, Connector.READ_WRITE, true);
              HttpConnection httpConn = (HttpConnection)s;
              httpConn.setRequestProperty(HttpProtocolConstants.HEADER_AUTHORIZATION,
                      "Basic "+_AuthenticationHash);
  
              // Connect and check status
              int status = httpConn.getResponseCode();
  
              //W. 8.7.K9 handle redirects: Twitter has been using these to combat DoS attacks the past few days
              if (status == HttpConnection.HTTP_TEMP_REDIRECT || status == HttpConnection.HTTP_MOVED_TEMP || status == HttpConnection.HTTP_MOVED_PERM) {
                  String newURI = httpConn.getHeaderField("Location");
                  if (newURI != null) {
                      //great, we have the new URL: go get it
                      s = null;
                      httpConn = null;
                      _CompleteUrl = newURI + "?" + post.toString();
                      s = (StreamConnection)Connector.open(_CompleteUrl, Connector.READ_WRITE, true);
                      httpConn = (HttpConnection)s;
                      httpConn.setRequestProperty(HttpProtocolConstants.HEADER_AUTHORIZATION,
                              "Basic "+_AuthenticationHash);
                      status = httpConn.getResponseCode();
                  } else {
                      //give it a second to populate
                      long begin_wait = System.currentTimeMillis();
                      while (System.currentTimeMillis() - begin_wait < 1000 || status != HttpConnection.HTTP_OK) {
                          try {
                              sleep(100);
                          } catch (InterruptedException e) {
                              // Couldn't sleep
                          }
                          status = httpConn.getResponseCode();
                      }
                  }
              }
  
              if (status == HttpConnection.HTTP_OK) {
                  // Log success
                  // Create element, null connection for testing
                  StringBuffer out = new StringBuffer();
                  InputStream in = httpConn.openInputStream();
                  byte[] b = new byte[4096];
                  for (int n; (n = in.read(b)) != -1;) {
                      out.append(new String(b, 0, n));
                  }
                  String test = out.toString();
                  // end for testing
  
                  httpConn.close();
                  httpConn = null;
                  s = null;
  
              } else {
                  // Log failure
              }
          } catch (IOException e) {
              // Log IO Exception
          }
      }
  }
  

  Problem is resolved now...

  I don't know that I need to use the MDS Simulator before starting my program...

  I got the information of existing Questions...

• OptiPlex 745c PSU standard or non standard atx

  Hello

  I think that the power supply is originally a result with the office, but to test, is the power supply in this office a standard?

  Service etiquette: ADMIN NOTE: maintain the label removed by privacy policy >

  Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy >

  Thanks for your time

  Dan

  Corsair CS750M works very well.  I also used Antec Earth Watts 650.

• Associate given carrier OAuth2 APEX user token when performing a query

  Hello community,

  We are developing a web application that relies heavily on the RESTful data queries.

  To do this, we have different users of the APEX (they are each a separate application user) who partner with some projects.

  We conduct approval via features integrated OAuth2, in fact through the flow of code-Protocol to issue a token to the bearer.

  Now, by making the actual REST query, we cannot use APEX_UTEL_CURRENT_USER_ID or something like that for us return the desired information

  .

  Is how to get the user associated with the given token?

  Our idea was to get the token in the request header and search for it in a "Token" Table, but unfortunately, we have no idea where (and if) the chips are stored.

  How can we not only generally restrict or grant access to RESTful web services, but provide a result that contains only the data of the user has access to?

  Thanks in advance!

  We have found the solution, it's actually pretty simple:

  Just use the property: ": current_user.

• Bad drivers wireless for my product.

  I (Dell system detect):

  Inspiron One 2320 (mid 2011)

  Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I need to reinstall the drivers for my card.

  Site gives me only the Atheros drivers for my product, but my wireless card is:

  Intel Centrino 6230

  and I need

  Intel ProSET/Wireless drivers v.14.01.1000

  Where I take it?

  Hello

  Try to download the driver from http://dell.to/1Ign2q6 .

  Thank you.

• Alienware 18 Left blown Speaker (no longer works)

  I bought my Alienware nine 18 less than 6 months ago.

  In my 2nd month, I noticed that my left speaker was a weird loud noise, especially with a bass sound. I tested my headphones to see if it was hardware or software related, but his helmet worked perfectly with both right and left channels.

  A month later, my left speaker didn't work and totally failed probably because she is totally explode!

  I never put volume more than 50%, so I'm quite surprised why this has happened. Is it possible that I can replace these speakers myself? Please guide me as I am very unhappy and surprised on how this can happen on a $2000 laptop +. I've owned more than 15 laptops of different brands within the past 10 years, it is the first time such a problem occurs.

  Service number:ADMIN NOTE: maintain the label removed by privacy policy > | Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy > question: left/speaker blown up

  Hello JoeFares!

  I apologize for the situation; If you are still under warranty and you live United States or Canada please send me a PM with your service number and a brief description of the problem so I can you help or contact the technical support site in your country so they can provide you with a solution for this problem.

• Positioning CSS or DW problem?

  I have problems with CSS positioning after spending several hours of reading and trial and error.  I'm starting to think that Dreamweaver is broken, and thoughts of reloading cross my mind.

  My desire is to have a background image "beneath" my page wrap div, essentially as a border surrounding it.  I posted this image of 'background' as relative position and therefore my wrap div page as absolute positioning.  The wrap of the page was given a background color and a line of text to allow me to 'see' where I am to get the correct positioning. I think that the background color of the page div wrap "show" but it is not. (?)

  I placed my palette, as we'll call it, with margins, while he was trying to put my envelope of page using the top, right, bottom and left through the CSS dialog box.  What are the values used, the div is in the lower left corner of the browser window and refuses to move.

  #palette {}
  background: url(images/pallete.png) no-repeat;
  Width: 1200px;
  height: 1400px.
  margin: 100px auto;
  position: relative;
  }

  #page wrap {}
  position: absolute;
  background: #C06;
  height: 1100px;
  Width: 960px;
  top: 100px;
  right:-120px;
  }

  It got so that the changes I've made to the CSS at this stage will not trigger even a refresh of the Panel styles CSS?  What gives?

  Thank you.

  I've never used "Live Code" before and could set more #page for my taste, but it's an approximate position, so to speak, I can only approximate its center within #palette.  I started thinking that I have the success, until I go to the browser view, where the #page position seems to pass.

  You try to use HTML as a word processor, and it's the absolute wrong approach (no pun intended)!

  Location of the item an absolute positioning is calculated based on the location of its nearest positioned ANCESTOR.  An "ancestor" is a container element, not an adjacent element (which would be a 'brother').  So, if you want to than your element to absolute positioning out of the location of a relatively positioned element, it must be a child (or descendant) of this relatively positioned element.  In other words, to make #page work against #palette, he must be inside #palette.

  If there are alternatives to ensure the positioning other than my current method, I would be interested to learn about it.  I'm not aware of the disadvantages mentioned with using this type of positioning, could you give some details please?

  There is an excellent alternative without using the positioning at all - it is called "best practices".   The disadvantages of using absolute positioning for all are:

  1. because the absolute position elements are removed from the flow of code on the page, they are immune to travel in other parts of page not positioned due to changes in browser window size or screen text size changes.

  2. because #1 is the case, and given that display text size changes can cause the container to change height, if this container is positioned absolutely, its text content may overlap other content to the screen.  More positioned in absolute terms of containers of text the worse this effect becomes quickly, producing a unusable, overlapping mess.

  3 in absolute position items on the screen regardless of where the items appear in the code, and as a result, it is entirely possible to have two parts of the text which are meaningful semantic when taken as a unit separated by a bit of code, or other pieces of text.  Thus, pages built with absolute positioning text containers are usually not semantically sensitive, which means that they would not succeed well when it is run by a system of assistance of the screen.

  4. in view of all these things, the pages that contain elements of balance and frequently positioned elements go wandering as width of the viewport is changed.

  As a result, the method most likely to be chosen by an inexperienced user due to its apparent simplicity is also the absolute worst possible approach to the construction of the page.

  Oh, by the way, the values of positioning below were obtained through 'slide' div = page in position.  I wouldn't rather Code Live, but taken into concrete values in the future.

  The approach of processing in action!  The only way to make the connection of concrete values is to have a provision already laid down on paper before you start.

  Tell more about how you want your page to look at (I don't know what you mean exactly on centering #page #palette 'up', but if you mean "before" then consider this -

  This is my page

  (Note that I deleted all the positioning, as well as all heights - of Villa is a bad idea to declare explicit heights on elements that contain text, once again because of possible overflow issues)

• Tags for accessibility - what to do with the Table of contents & more

  I'm looking for assistance and advice concerning the marking of a PDF document for accessibility using Acrobat 9 Pro.

  So far, the most I've ever done with Acrobat's create the occasional straight-text document and a few simple forms.  But my boss asked me to score a manual of programming for accessibility and I'm a little lost.  There are a lot of both the images and the code examples in this text that I have no idea how work with because auto-tagging is seems to be haywire.

  I downloaded the Acrobat 9 Pro accessibility repair Workflow document and have done the following:

  1. Determined that my document is not a scanned document.
  2. Determined that there are no forms or the buttons in this document.
  3. Set the language to English.
  4. Set security for document "no security".
  5. Determined that the document contains bookmarks.
     
  6. Determined that the document is not a document labeled.
  7. Run the accessibility full check.
     

  This is where I ran into problems - both because of the nature of the document and my own ignorance of the process 'make accessible '.

  My table of contents is divided into several areas indicated in the form of tables, but the individual elements of the array are improperly identified - I have no idea how to do to make them appear correctly.  Advice would be appreciated.  Suitable for the Table of contents even being a table?  I know it's called a table, but it has several levels and I'm not sure what to do with it.

  There are also several tables in the document.  They appear especially OK, but Acrobat seems to think tables are made up of individual and figures produced "No alternative text for Figure" errors on some of them.

  I mean, how the hell can I make text flow on code?  The code is all text, not images.

  If someone knows something about this whole thing accessibility I would greatly appreciate your comments.

  Thank you!

  Jenn

  Assuming that the original manual is the WORD, it is probably best to simply go back to WORD and PDF Maker allows you to create the PDF file. Which will add bookmarks and other tags which will provide accessibility. Probably all that is needed. It is much easier to create your own tags. Of course, I guess you use style sheets in the original and this marking would be. If you have not used the style sheets in the original, you probably have a lot of work in front of you.

• Dell Inspiron 3537, few problems

  Hello.

  I have an old Dell Inspiron 3537 of a few weeks. Was first Win8, but I have the update Win8.1.

  After that I signed up for laptop computer, the next step was to my C: partition on both sides of the partition, partition C (OS) and D (Data). After that, I installed successfully all the programs I need. And after a few days problems began with a few BSoD. There are few problems and I'll explain all of them.

  My Dell checkup "troubleshooting blue screen" reports every day one or more BSoD with explanation:
  "The unknown hit-and-run driver (C:Windows/system32/drivers/atikmdag.sys) seems to have caused a system crash. Perform the tasks below to help prevent unexpected stops in the future".

  On the same health check of my Dell, I try to run "PC Checkup", and everything seems OK, no reported problem. A personalized analysis on a single card, ATI (ATI Radeon HD8850) video and the result is 'passed '.
  I run also build in DELL diagnostics (boot menu) and there were no errors, and also Dell diagnostics online and everything was fine.

  I try to install the new driver from DELL (AMD Radeon HD 8850 M pilot 13.151.0.0) website, but during the installation screen blinked several times and then went away. I think it's OK because the video driver installed. I left phone for an hour to "complete installation", but noting happened. I turned off laptop by pressing ON / OFF button for 5 seconds, but after this laptop won't restart. Here, I noticed another problem that I will share with you in the moment. Fortunately, I have installed Acronis True Image 2014 so I was able to restore a system. BTW, same version of the driver is already installed according to the "MSINFO32).

  Now, my system works, I still see the BSoD warning in my Dell Checkup, but actually I don't really see this BSoD. Strange.
  If I click with the right button on the desktop and then click on "Property Graphics" or "Configure switchable graphics", I get this warning:

  

  Second problem. My laptop during "BLACKOUT" explained beforehand, I tried to use Windows Recovery. I tried "Refresh" and "Resettlement" and both times I got the message:

  "Could not find the recovery environment. "Insert the recovery media or your Windows installation and restart your PC with the media.

  If I try to use "Backup and recovery of Dell", I received the message:

  "Dell backup / restore could not detect the Partition Recovery on this computer." It may be missing or damaged. To recover your computer to the original factory condition and restore the recovery partition, please use your system recovery disk"etc. etc...

  I don't have any coz discs that OS was preinstaled. So, basically I can't use all the facilities to recover my laptop because I have no media or recovery factory recovery disc. Fortunately, I'm using Acronis, but it's not a point. I want something to recover my original system, factory condition.

  In fact, Windows catering facilities are OK and I can restore to a point, I created.

  BTW, my hard drive is partitioned on 7 partitions. Initially, there were 6 partitions with immense C: partition. I shared this one on two.

  

  And also, since this BSoD is probably caused by the video driver, how can I safely to update this driver. As explained previously, I had after the first test disaster. Can I try to install the new driver for AMD Radeon HD 8850 M from the ATI site?

  Sorry for the question so long. If you have additional questions, I'll be more than happy to answer.

  I hope that I will get answers, thanks in advance!

  Inspiron 15R (5537, mid 2013) Service tag:ADMIN NOTE: maintain the label removed by privacy policy > | Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy >