fnd_global.apps_initialize fails when IBM Webshpere

Similar Questions

• ESX 4.0 restart failed with IBM x 3650 M2

  Just installed 2 x ESX 4.0 Build 171294 on 2 x IBM x 3650 M2 yesterday and the two system worked very well so far. In any case currently having same problem happened on two devices. Whenever I reboot the system, it does not start in ESX with error message "boot hdisk0 failed. But when I boot using the DVD installation ESX 4.0 and selected boot from the first hard disk, there continue to start in ESX installed successfully without error.

  The vi client adapter and storage configuration, I see 4 x adapter scsi as below:

  • ICH10 - vmhba3

  • ICH10 - vmhba33

  • ISP2432 - HBA vmhba1 & vmhba2

  • LSI Logic Megarade - vmhba0

  vmhba0 is the place where the local disk (73 x 2 = RAID1) currently being attached & installed with ESX 4.0

  any idea?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

  I had this problem too, when installing Win2k8 R2 on x 3650 M2. I guess it's the same for any OS.

  I found the following articles from IBM. I did have the chance again to check if it suits it.

  Local boot OS fails when the external storage is attached - IBM System x 3550 M2 / x 3650 M2

  http://www-947.IBM.com/systems/support/SupportSite.WSS/docDisplay?lndocid=MIGR-5081613&brandind=5000008

  This is for ACPI operating systems no UEFI.

  Operating system that supports UEFI does not start after message load defaults or deployment - IBM BladeCenter and System x

  http://www-947.IBM.com/systems/support/SupportSite.WSS/docDisplay?lndocid=MIGR-5079636&brandind=5000008

  UEFI and Windows 2008 operating systems.

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• Error message: "the server has failed", when you try to download "sp1aexpress_usa".

  Original title: "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  I downloaded the file "sp1aexpress_usa", but when it works, I am getting error "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  Hi JasonVigh,

  You can check the link for redownload SP1a and check if you can install it:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751

  For more information, see the links:

  How to get Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  You can also check the links of thread for more information:

  Impossible to connect sp1aexpress_usa.exe (Windows XP sp1a), get the error the server has not responded

  Failed to load Service Pack 1

• Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  Dear Sir.

  Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  OS: Win XP Prof

  Bluetooth device: Widcomm connected to the desktop computer

  Thank you & best regards

  Magali U

  Hey Ma U,.

  Follow the steps in the article.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

• Error - installation failed when trying to open AVG Antivirus and internet options will not open.

  Original title: I need help to fix my 'internet options' in the control panel.

  THiiS is a recent problem and I don't know what may have caused it. I tried to install a new virus program to see if the problem was a virus or spyware. I have read that sometimes AVG will cause problems. But in order to install the new antivirus, I have to remove AVG... cannot do! It says "installation failed" when I try to open the long counter. There is therefore no uninstall program. I need to open my internet options in the control panel to start the process of fixing things. but it does not open. I can't download all the programs from my browser. In the lower right hand corner of my IE on the left 'internet' is a white box with a red X.

  UPDATE... I used my external CD/dvd drive and was able to copy the installation for firefox to a computer and put it on the shot, I have problems with. Hooray! success... Now, I have firefox and a navigation bar and was able to successfully download a program from the internet. Now, try to uninstall AVG... (how the hell uninstall something that says 'installation failed')

  Hi patriciashifflett,

  What version of Internet Explorer you have on your computer?

  Due to Internet Explorer, you can follow this link & check if the problem persists.

  Internet Explorer does not start or stops responding

  To remove AVG Anti-virus, you can download and run AVG remover which eliminate all parts of your installation of AVG on your computer, including the registry, system files, user files, etc.

  http://www.Avg.com/us-en/download-tools

  You can also download & install Microsoft Security Essentials on your machine.

  Hope the helps of information.
  Please post back and we do know.

• Error message: MatsGetSapCatalogue failed when I try to log on to Fixit Center.

  Original title: MatsGetSapCatalogue failed

  Why do I receive the message > MatsGetSapCatalogue failed< when="" i="" try="" to="" log="" on="" to="" fixit="" center?="">

   

  Hi Malgaff,

  Since you get this message when you try to log on to Fixit Center, you can post your query on Microsoft Fix center for assistance.

  Microsoft Fix it Center

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• issue of fnd_global.apps_initialize

  I'm trying to excute apps initialize but in error

  Code: start fnd_global.apps_initialize (18091, 52887, 222); commit; end;

  I tried to put option profile and everything. Can you please tell me what exactly will pin point.

  Is this a question depend on SQL Developer?

  As I trying to run a mastic of sqldeveloper, his job very well. But on SQLDEVELOPER does not.

  Error-
  Error report-
  ORA-20001: Oracle - 20001 error: ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, MO_GLOBAL. INIT, N, ERRNO,-20001, N, REASON, ORA-20001: APP-FND-02901: you do not have the privilege to access any unit operating. Please check if your MB option profile: Security Profile includes operating any unit or the option to profile MO: business unit is defined.
  has been detected in fnd_global.initialize [fnd_init_sql].
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_GLOBAL', line 265
  ORA-06512: at the 'APPS '. FND_GLOBAL', line 2424
  ORA-06512: at the 'APPS '. FND_GLOBAL', line 2546
  ORA-06512: at the 'APPS '. FND_GLOBAL', line 2698
  ORA-06512: at the 'APPS '. FND_GLOBAL', line 2636
  ORA-06512: at line 1

  Thanks for the moments techicgh.

  A resolved.

  In settings of SQL Developer - > NLS-> Enable by pass check box, and then restart SQL Developer.

  NLS tools setting is only not with the DB up errors.

  After adjusting, it worked for me.

  Thank you

• Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  all the details here

  Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'

  Resolved in the thread on the GS.

• I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  Hello

  If please close the process below for task/monitor activity Manager and try again.

  

  Hope that helps!

  Kind regards

  Sheena

• 17 ADT of AIR package for iOS fails when you use both "-Yes hideAneLibSymbols ' and '-useLegacyAOT not.

  Hello

  I have a strange problem, and could ' thin t the answer yet on any forum.

  AIR version: 17.0.0.99

  The command-line ADT package for iOS fails when I add the two '-Yes hideAneLibSymbols ' and '-useLegacyAOT no ' and if it also contains the native extensions of .ane, which have been updated to support iOS arm64. "If I take the -" hideAneLibSymbols Yes "part of the command line, it works fine, but I need to use it as well, since I use several native extensions, and otherwise I get the error of duplicate symbol. So, it seems to me that hideAneLibSymbols is also there, then the useLegacyAOT is not taken into consideration.

  
  

  That's how I tried to package it:

  ADT-package - target ipa-test - hideAneLibSymbols no useLegacyAOT yes - no - keystore... / Certificates/ASD. P12 - stores pkcs12 - storepass asdasd-putting into service-profile... /Certificates/ASD.mobileprovision asd.ipa asd - app.xml asd.swf assets icons extdir - anes

  
  

  How could I solve this problem? I used to .ipa files using Flash Pro CC 2014 compiled, but now I can't, since I can add there Yes hideAneLibSymbols .

  Thank you

  Lehel

  Please try with the latest beta "Adobe AIR Beta 17 |" -development of applications Adobe Labs'and let us know if you still see problems.

• Why keep the program fails when I click Update

  Why keep the program fails when I click on update, in particular different editing software

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Try to Thinapping MS Office 2007, but failed when an error «could not copy ##attributes...» "is thrown.

  Hi all...

  Try to Thinapping MS Office 2007, but failed when an error «could not copy ##attributes...» "is thrown. I'm trying to save the project to a folder under vista (called "shared folder") to a virtual machine by using windows XP SP2. I made a mistake? Your help is really appreciated for the entire community, thank you.

  Hi MrBean344,

  If I was wrong, you will get the error for GetAttributes... while building the project. Am I wrong?

  If so, then I think it was due to the long way to have more than 256 characters. Can you please try to save your project in the short path such as C:\ and rebuild the package?

  I think that after doing this, error is not displayed and application is virtualized.

  Thank you best regards &,.

  Margaux Khopkar

• Illustrator CS6 says 'installation failed' when installing.

  Illustrator CS6 says 'installation failed' when installing. No explanation is given. I have not all previous versions of the installed AI or any trial. Help? I really need to use this product today!

  We do not know. You must provide the information system and possibly Setup logs:

  The problems with the installation logs

  Mylenium