Follow the Luma Key mat vs Alpha

Similar Questions

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• pop-up window begins to show by ask me 2 activate, when I followed the procedure, he tell me that my product key invalid, 0xc004c008 error code

  I work with my home premium Windows 7 for 2 years now, produced original, a real 2 months ago are beginning to show by asking the window 2 turn on, when I followed the procedure, he tell me that my invalid product key, 0xc004c008 error code, pls help

  Original title: product key problem

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  http://support.Microsoft.com/kb/950929/en-us

  See the following topics:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

• When you use a wired keyboard, the first key I press is ignored and the following keys are recognized.

  I use Windows 7 Ultimate, with automatic updates.  This just happened recently.  I have not had this problem in the past.  I recently had problems to install a wireless adapter, but the issue has been resolved.  When I login, the password is recognized (apparently don't ignore the first key), but when you use an application, such as Google search, the first character is lost.  If I press the first button, it works.  This seems to be the same in any application.  Thanks for any help you can provide.

  Ron

  Hi Ron,

  1. What is the model number of the keyboard?

  2. have you verified the functionality of keyboard on different computers?

  I suggest you to check if the keyboard works well on different computers.

  We can see the links and check if it helps.

  Troubleshoot keyboard (Applies to Windows 7)

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  Let us know the results. We will be happy to help you further.

• Invalid key clean upgrade following the installation of Windows 7

  Hello

  My PC came up with an OEM of Windows 7 Home Premium version.  Later, I upgraded to Windows 7 Professional by using the Express Upgrade option.
  All was well in the world until my PC suffered a bit of a meltdown and I was forced to make repairs and restore it to its factory default condition.  Of course, the original version of Home Premium OEM has been reinstalled.
  Now, when I try once again, upgrade to Windows 7 Professional, using the product key, I had already received after the purchase of the upgrade of Microsoft, I got the error: the upgrade key is not valid.
  There is a chance that I could have written the wrong key, but I don't think that this is the case.  Also, I threw down the product ID of my version of Windows 7 Professional, installed before resetting in the case which is of no use.
  Thanks for your help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Please, I have the following question on the foreign key and the ora-00904

  Thanks in advance!
  
  I created the table:
  
  Create the Department table
  (
  DNAME varchar (15) NOT NULL,
  deptID number (5) NOT NULL,
  Primary key (dname, deptid)
  )
  
  then...
  
  Create table Manager
  (
  MgrID number (10) not null,
  Not null, name varchar (10)
  Start_date date not null,
  Primary key (mgrid),
  
  CONSTRAINT fk_department
  FOREIGN KEY (dname, deptip)
  Department of REFERENCES (dname, deptid)
  )
  
  Trying to create the table with the constraint, it yeilds one:
  
  ORA-00904: "DNAME": invalid identifier
  +.. .with an asterisk under "dname" in line: FOREIGN KEY (dname, deptip) +.
  
  I tried joining my name of the column with quotation marks ("" "); capitalized for consistency; and we tried creating and editing then - all to nothing will do. I also tried to use the user interface with Oracle Express Edition and the moment where I click on create, the same error appears. Could someone help please straighten out me up - was this threat for four days.
  
  Thanks again!

  Hello

  Welcome to the forum!

  Columns that will reference the other table must be declared just like all the other columns; including the names in a FOREIGN KEY constraint is not auotmatically define them.
  It works:

  CREATE TABLE Manager
  (       mgrid          NUMBER (10)     NOT NULL,
       Name          VARCHAR (10)     NOT NULL,
       Start_date      DATE          NOT NULL,
       dname          VARCHAR2 (15),               -- New
       deptid          NUMBER (5),               -- New
  PRIMARY KEY (mgrid),
       --
  CONSTRAINT fk_department
  FOREIGN KEY           (dname, deptid)
  REFERENCES department (dname, deptid)
  );
  

  (assuming that the departments table, you posted, there).

  Is there a reason why you use VARCHAR instead of VARCHAR2?

  In the departments table, do you really need both dname and deptid in the primary key? For example, if you have a line with name = "ACCOUNTING" and deptid = 10; is it possible that you could have another line with deptid = 10 and some different dname, say 'REASEARCH '? It is more common to only have a deptid as primary key and have columns in the foreign key constraints that reference.

• How do I blur and follow the many faces in Premiere CS3?

  I have a video in which I need more of a persons face the blur. I know how to blur a face using a mosaic filter, and track matte key but I can't get this to work for other faces in the same clip that are moving independently of the first person. I watched a lot of tutorials, but they all only show how to blur a face. Any help would be greatly appreciated.

  
  

  I thank you.

  Here's another way to do this, and in a way that I think is a little more tidy:

  1. Create a sequence called "MATTE" with as many tracks as sides you need to blur, plus one.
  2. Create an oval or face shape chart using the titration, Photoshop or other graphic software module. Don't forget that the oval is a pure white, with a transparent background.
  3. Remove your video clip on V1 and then drag an instance of the oval design on each of the remaining tracks.
  4. Position and animate each graphic oval over a face. If the people in the shot are not mobile, but the camera, you can animate the position of one of the ovals, then copy and paste the path to the rest of the oval graphic instances effect. Then, change the anchor point property to adjust the absolute position; the relative animation remains consistent.
  5. When you are finished animating the ovals, turn off the visibility of your video background on V1 layer.
  6. In your final movie, place another instance of your video clip on a track directly above the first. Drag the sequence MATTE BAC on the track above the clip duplicate. So if your original video clip on V1, V2 would be a copy, and the MATE nested sequence will be the V3.
  7. Apply the Filter Blur/mosaic and adjust the settings to your liking at the occurrence of clip on V2. Add the matte key track effect and set the matte V3 (or anywhere where your MAST is) and set the parameter of Composite using Alpha Matte. Immediately, you should see matte work on the track.
  8. You can also apply a blur (for example, blur accelerated) to the element nested MAST in order to soften the edges of the matte a bit. Adjust to your taste.
  9. If you need to adjust the position of one of the 'faces', go to a sequence of the MATE and tweak it. Changes will automatically appear in the final sequence.

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.

  QUESTION BY E-MAIL:

  FOLLOW-UP iMAC SETTINGS for ROGERS.

  THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)

  ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE

  OS X Yosemite 10.10.5

  Serial number. D2 * 8J7

  It is difficult to read.  Please use the top & bottom case.

  Please provide a link to the instructions.

  Please provide image on the screen to how you have configured these settings.

  -------------------------------

  How to show an image on the screen.  Avoid personal identification.

  on Mac, you do:

  Command + shift + 3 will have the entire screen.  You hear a click.

  Command-shift-4 lets you decide what to take.  Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire.  Press and hold the left key of the mouse to start the image.  Drag the mouse to lower left where you want to stop the image.  Mouse release.

  You will get a .png file to the desktop image.

  On the entrance sign of the forum, you will see the camera icon.

  

  Click on the camera icon.

  another window will appear.

  Make sure you have selected the in your the computer tab.

  Click the Browse button

  A Panel to open the file.  Select the file.

  After selecting a file, I have this screen showing.

  

  You need to click Insert Image.  You may need to scroll down to see the button to insert an Image.

  R

• The Tab key no longer works for allows me to go between the text entry boxes

  After updating to the new version of Firefox the Tab key is no longer work when switching between the text fields to enter information such as shipping address, name and stuff like that where a simple TAB could sail between the text boxes.

  Hello benpierce25, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  • You also had a file User.jsin your profile folder .

  The user.js file does not exist by default. If you create the file, forget it, if you don't have not create the file, and then remove the User.js file, to see if the problem goes away (some programs create and write to the file also).

  Thank you

• I followed the instructions and can't do full screen to quit.

  I clicked on the button menu, then on the button fullscreen. He gave me a full screen. Then I clicked the menu button and clicked the button fullscreen. The top bar is returned to the normal size and then disappeared leaving me with a full screen. How to get back to normal?

  Hello

  The keyboard shortcut for the fullscreen is F11. If the key is stuck?

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Mac: Hold the option key during the startup of Firefox.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• Selection of the tabs and the arrow keys Tab Switching

  Older versions of Firefox had this feature. Before 3.0, Firefox allow you to select the text around a tab by clicking through, allowing you to scroll the tabs using the arrow keys. After 3.0, you could do this by clicking on the left and then immediately right clicking. I have since past 12 Firefox, and I can't seem to find this feature, even if it is useful for me. Is there a solution or a way to do this in Firefox 12 I don't know? Addons which adds this functionality or a parameter, would be greatly appreciated.

  EDIT: I know there are other ways of the tabs, but the arrows were particular dresser.

  In fact, I found a good work-around (which was rather hidden) which is exactly the same functionality as before, but in several stages.

  If you're like me and you wanted it, do the following:

  -Press Control-K-
  -Press tab-
  -Take advantage of arrow tab switching!

  I don't know why it happened progressively more difficult over the years, but at least I can still do it.

  Thanks to cor.el, or something like that.

• HP Envy 17: Reverse the function keys

  Hey guys,.
  
  My laptop is a very good laptop, with a good graphics card nvidia an i7 cpu and even 16 GB of ram. Even with a 17 inch screen full HD 1920 * 1080, making incredible games! Even GTA V for Pc works quite well on this laptop powerful.
  
  All of these things are an amazing gaming PC, however, it has a match no one back which makes it almost impossible to play a game with good fluidity.
  
  Present a defect of fatal game is actually the keyboard, but to be more precise, it is the function keys. The HP Envy 17 has two F1 - F12 and INSERT key. However, these are the secondary keys. Primary keys are keys system that changes the brightness or volume. That means if I want to use F2 in a game, I have to hold the function key, and then press F2.
  
  This seems minor, but when you play, it can be annoying to have to hold down a function key just to use one of the F keys.
  
  Dies, does anyone know how to get this fixed and reverse the trend, in this way if I want to cut my cell phone that I have to press the function, then the F6 key. I hope that people know what I mean and please if you know of a fix would be great if you could post it below.
  
  Thank you
  Connor Burnett.

  Hello

  Yes, I used the F1 - F12 keys on a daily basis for the last 35 years or so, but fortunately I always use external keyboards using laptops (on or off a docking station). You may not share, but disable. Please use the following article:

  http://support.HP.com/au-en/document/c02035108

  Kind regards.

• I want to import favorites from Bing, but when I press the alt key I do not get an import tab

  I'm following the instructions on importing the Favorites (bookmarks) of Bing. I press the ALT key, but I don't get any menu that says import.

  ALT > file-> import...