follow-up of each question in LMS

Similar Questions

• Pools of question in LMS

  Hello

  I am using Captivate 5 to create quizzes that I am uploading (?) of my LMS. I want students to access quizzes, thought of CMS, and to be able to have 4 tent then pass an exam. With each attempt, I want that they have selected, different questions from different pools of question. Could someone help me with this? How would I do this on the Captivate? How it will work once it is accessible through the LMS?

  Thanks much for any help you can offer. I am VERY new to all this.

  Best regards

  Jill

  If you want the best chance to show your users to different questions each time than do the quiz, you must define the allowed number of attempts to quiz in Captivate 1 attempt lesson and allow the LMS to control the number of times that the lesson can be launched to make the quiz.  In your case, that you want it to be 4 times, so put the LMS to allow only 4 attempts in the lesson.

  The reason why you need to do this way is due to how the randomization of question pool.  It occurs when the module is started, which means that questions selected from the pool of matter will be set for the rest of this session.  So if you allow several attempts to quiz in Captivate lesson and provide a button Retake Quiz, the user will always see the same question than the first game, they took the lesson at this session.  However, when the user raises all of the module again, then the randomization comes into play again.

  I don't know exactly what the randomization algorithm is that use question pools, but Cp modules don't persist data from a session to another.  If the module is not held a record anywhere of the questiions that he showed the last time. It is essentially a randomization fees whenever you launch the module. In other words, there is always a possibility that your user will see some of the same questions on the next launch.   To make this less likely, you must have a larger pool of questions to learn. In your case, if you have 10 questions, and you want 4 attempts with a reasonable chance to see different questions, I would advise you on 40-50 questions in the pool.

• Question of LMS in ciscoview

  Hi all

  View Cisco (patch 6.1.9) lms 3.2.1 not support router 1905. Any help here?

  Thanks in advance

  Vinciane

  3945 of Cisco Integrated Services Router is supported. You should have Rtr3900 package, a minimum of version 1.1. However please note Cisco 3945TH Integrated Services Router (CISCO3945E/K9) is not supported.

  You should get these details in the document I shared:

  http://www.Cisco.com/en/us/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

  To match the respective SysObjectID of devices which is the unique identifier. As 1.3.6.1.4.1.9.1.1041 is supported 3945.

  -Thank you

• How to examine each question

  Is there a built-in feature to look at each issue, or the area of review works that took the quiz of all?
  
  TIA

  Captivate offers no option to integrated review (of the issue), but it's easy to create your own. It just put a slide (Virgin) between each slide quiz and if the user responds incorrectly, set quiz-slide to go to this (blank) slide - on which you placed a text caption, slidelet or whatever, to explain the correct answer. The (empty) must also contain a button "Next" or other means for the user to continue with the rest of the questionnaire after reading or review one before. I hope this helps.

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  For example, 1z0-117 Oracle 11 g r2 SQL Tuning has 75 questions.

  Some of these questions you will have to look a long explain plan

  and determine what is happening.

  Other issues could be just take 2 of the 4.

  Is equal weight each question.

  Roger

  Is equal weight each question.

  Yes.  And each issue is 100% right or 100% false.  There is no middle ground with multiple answer questions.

• Randomization of questions for each quiz attempt

  Hello

  In my project, I want to give learners 10 questions, each question from a separate pool. I put the quiz of endless attempts and a passing grade. If the learner does not pass the quiz and needs to regain power, I want the project again to shoot random question pools and generate another round of questions (some of them the same, which is not serious for this project will be probably).

  My problem is that I can't work on how to generate a set of questions on each attempt. the same set is always presented. Trying to understand this point and not being not able to find a native function for this or even any discussion about it any where, my secondary question is... I'm out on a pedagogical branch want to do this? (I'm trying to strengthen learning in repasting the relevant content in the correct/incorrect legends).

  If anyone has any ideas on one, I would appreciate it.

  Joe

  Adobe was of the opinion (which in fact, I agree with this time) If you have submitted a set of questions to a user, then they should be able to master these specific issues, before you take another series at home.  Even if the new set would look at similar knowledge.

  So, you will find that you can only draw a new random selection from the pool AFTER relaunch the lesson module.  It's just the way it works.

  If you want to see work differently, you can join the list of other people who have asked this question even in the last years and sign a request for improvement.

• Captivate quiz - adding an additional field to report on the LMS

  I have a Captivate 100 question quiz to report to an LMS.  We can get all the information with a report of interactions between all.  The contractor giving the test wants to be able to refer to the section of a manual which the questions come from. The only way I was able to do this so far is to put the mention of the issue at the end of the issue, and then change the font to white color.  And then it appears on the report of the LMS.  Is it possible to add another field or something that will also be visible on the report of the LMS, but is not visible to the person who takes the quiz?

  There is currently a bug in Captivate 7 (maybe even in 6) which causes this problem where an interaction also ID change the slide following, as well. If all goes well, that will be corrected in version 8.  But in the meantime, you just go down the list of the IDS of Interaction and make sure they are all unique, that otherwise you will get error messages.  I use the function of Interaction ID prefix in Quiz settings do to precede rights holders Captivate unique number to each question in the quiz.  The prefix that I use is a code which clearly indicates which module this quiz question comes.  But you can go further and indicate what the question is about whether you want.

• Questions laptop starts to really frustrate me

  First off I hope by specifications, which means laptop and I am posting this in the right place. I have read many places Q & A with my questions, and today I took my laptop at Best Buy/Geek Squad to fix these problems, but after an hour away, I still have problems.

  I have a HP Pavilion dv7 Notebook PC with Windows 7 Home. It's about a year. Here are the problems.

  (1) after a cleaning, done by Geeksquad, I just noticed that my cyberlink youcam no longer works. It appears that it does not detect a camera. This unit is integrated. After talking with the guys at GeekSquad today, he couldn't understand and suggested I send my laptop in 2-4 weeks people elsewhere to go inside and see if it's a hardware problem with the camera. This is covered by my tech support. The YouCam worked the last time that I used it, before the last 'clearing '. I downloaded the latest driver and see no other choice but to send everywhere where it should go. Anyone had this issue and know how to deal?

  (2) I can't access my host/router settings page. I type in the 192.168.1.1 and it gives me an Internet Explorer cannot display this page. The GS guy suggested was my routers fault, he couldn't give me hard real answer as to why or what was going on. Once again, before the last cleaning, I could access my router home page. How is it that my laptop is to connect to the router and has access to the internet, but I can't get on the home page. Am I missing something? I ran one configsys/all in the cmd window and ensured that I got the good IP, what I'm doing. I have reset the router. I unplugged for 30 seconds. Nothing. It is a Netgear, dual band, about 2 years. I am considering buying a new router and see if it's the problem. If the clues as to what is happening with this problem?

  (3) my last question is that I can is no longer possible to connect to my wireless printer. A few days ago when I tried scanning to my laptop. He could not find the computer. When I looked on my printers and devices page, I saw that he had listed the HP wireless printer. The printer showed that it was connected to my router. My laptop is connected to the same router. I uninstalled the printer and reinstalled on my laptop, but now, it is not listed in the printer and peripheral page. When I do a search for the printer, it comes back with nothing. When I type in the information, it is still not connect. Once more, the guy of GS had a definitive answer to why it happens. It seems that his only solution was to get a new router because he suspects that the router is the problem.

  I am extremely frustrated at this point because I'm not very tech savvy and with these 3 things stacked on me at the same time, well, I'm pretty angry. Here, the community can provide any help would be greatly appreciated. If I need to provide more details in regards to the laptop, printer or router, please let me know. Frankly, I just want to get these issues out there as quickly as possible and I'm just fed up looking around for answers and everything else tonight. I hope someone can give me an idea as to what might happen. Heck, I just like to know what the problem. There are so many components of a computer, I don't even know where or what to look for. Thank you all.

  Hello Force95b.  I understand that you have had some problems since having your laptop cleaned by Geek Squad.  I'll answer each question individually for you.

  1) there are many things that could cause the webcam to stop working.  It could be the software (corrupt drivers, a problem with YouCam or similar) or it could be a hardware problem as a failure.  To determine exactly what the problem is you will need to try a few steps.  Fortunately, I made a detailed post on this exact error (webcam not detected).  Take a look at my son (here's a link) and try to proceed as I pointed out.  Be sure to view the results for me to review.

  (2) that this problem occur more wireless, wired, or both?  If you are able otherwise to connect and use the internet I don't think you have a problem with your router.  It is probably just a parameter that must be changed.  You said you have a double router broadband.  Have you noticed your twiced wireless network in the list of networks when you connect?

  (3) what model is the printer?  I think that your wireless printing problem and your problem of router above are part of the same problem.  Thus, the resolution of the problem with the above router will be necessary before taking action on this issue.

  In order to start work on questions 2 and 3, I have a suggestion.  If you are able to access the configuration of the router, wired or by another PC, you must change some settings.  First of all, make sure that your router is only using the 2.4 GHz frequency.  HP printers are not fond of dual band wireless and the frequency of 5 GHz specfically.  You must also make sure that your router communicates on the two channels one or eleven.  Once you have changed these settings turn off the printer, the computer and the router and reactivate them all before you test the feature.

  You'll also want to completely uninstall/reinstall the printer.  I will provide you with detailed measurements.  Try the following.

  1. Remove the printer from devices and printers (However, it looks like it's already gone).
  2. Simple left click on "Document of Microsoft XPS writer."  If you look at the top of the window you should now see "properties of the print server.  Select this option.
  3. Go to the tab "drivers".
  4. Remove HP printer/fax drivers you have here.  Remove driver and driver if package you are prompted.
  5. After the removal, click OK to close the window.
  6. Click the Start button, go to all programs and then in your printer folder.
  7. Uninstall the printer via the uninstall program located in the folder.
  8. After uninstalling, restart the computer and download the latest drivers for your HP support printer
  9. Install these drivers and restart the computer.
  10. Check the features.

  I hope it's useful.  I'm waiting your answer to my questions.  I wish you a nice day!

• Sanitation in a course with several slides contained and question slides

  My goal is to build a course that consists of 20 ~ content slides (each has a small video conference), followed by several questions each to compose a great quiz, each answer is counted toward the degree.

  So my current configuration is as follows:

  • Each slide of the Conference is followed by question slides 1-3.
  • An attempt is allowed by each question.
  • All questions must be answered correctly before a user can move to the next slide content.
  • Each conference is preceded by another slide of content and has a button 'Next' with 'Back to the Quiz' on measures of success.
  • Failure to answer a question correctly, the user is redirected to the previous slide in conference at the Review Conference. Then the user is redirected to the slide in question failed (via a button 'Next') and the next attempt to answer the question.

  I understand the scenario of reclamation and was able to set up the first slide of the Conference, followed by 3 question slides, and everything works as I want. Button 'Next' on the slide of the Conference works properly depending on where the user came to the Conference slide of.

  However, when the user finally arrives at the next Conference slide, as soon as they click on the 'Next' button on this slide, they are brought back to the last slide in question answered: in my case, it's the third question slide after the first slide of the Conference. The loop closes just here.

  Basically, there is no way for the user to pass the second slide Conference.

  Why the button 'Next' on the second slide Conference not to go to the first slide of the following question?

  What I am doing wrong?

  Thank you.

  Lyolya

  Captivate sanitation with failure - part 1 - blog of monkeylogic

  Captivate sanitation with failure part2 - monkeylogic blog

  Lilybiri, I think that the solution to my problems is very well explained in the posts above I found last night. With a few changes, I could get my course work just as I had originally planned.

  Here's what my structure/feature class now looks like in my test file:

  Title slide

  Video conference 1

  Questionnaire1 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 1 first incorrect answer; go to video conference 2 success OR the second incorrect answer.

  Video conference 2

  Questionnaire2 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 2 as soon as the first incorrect answer; go to video conference 3 success OR the second incorrect answer.

  Video conference 3

  .. and so on.

  The notation works, too!

  I'm actually very happy to have found a solution to what seemed to be an impossible feat. Thank you for your help, I appreciate the time you took to answer my questions. As a completely new Captivate user, I think that I learned a lot in the last week, thanks to your contribution, and that of many other generous people on the web.

  Thank you

  Lyolya

• Tracking number of attempts to correctly answer a question of MC

  I have a number of MC and T/F questions where I need to track the number of attempts it takes for a user to answer the question correctly. The T/F is easy because I am only allowing 1 attempt, so I can check to a pass/fail. However, the questions of MC allow 2 attempts. If a user he responds correctly, I need to know if it was the 1st or 2nd time and it seem not to be a way to track it (not that I can find).

  I created 2 user variables for each question, the answer choice 1 and 1 for the tests, but he doesn't seem to be a way to fill until attempts maximum has been reached that defeated the whole purpose.

  There must be a way to fill a meter of attempts until the maximum has been reached. Of course, Captivate is followed that somewhere, but I can't find a system variable that seems to fit.

  I am tracking also attempts to quiz and need to aggregate the question through the quiz attempts total attempts, but let's first. I'll be happy to get information of attempts to question once at this stage.

  I use 8 Captivate.

  Any help would be greatly appreciated.

  Post edited by: Karen Moyes I changed the subject line and tried to better explain what must happen.

  Hello and thanks for responding.

  I am aware of the events that I have to use the quiz questions, I just regret the fact that, while in captivity titles nicely your attempts to answer for you so that you can add different success and failure of the options, there is no easy way to retrieve this info.

  I figured out how to track attempts to question without having to change the number of attempts on the issues of choice of MC, so I kept the 2 attempts. I had to create a lot of variables and some cases rather complex statements multiple decisions for success and failure to do so, however.

  Now 'all' I have to do is double what effort each quiz attempt, which will not be very easy because I am already bypassing the default of Captivate built to go to the 1st question quiz on the recovery and I have many other customization on some slides that must be taken into account with subsequent attempts to quiz. Once I got that all together, I'll be happy to share, even if it will take a lot of screenshots!

• can 2 questions on the same blade cause different identifiers?

  I use 8 Captivate. I have problems with the interaction of SCORM 1.2 question ID.

  I have 2 questions in the survey on the same blade. When it is reported to the LMS, these two issues appear. But they have the same interaction ID. For example:

  I hope that my spouse

  My spouse trusts me

  These two questions are emerging in Moodle as this:

  Agree 12345_I_trust_my_spouse

  12345_My_spouse_trusts_me disagree

  Is it possible to add a second identifier to each question? It would help my queries of the database of the LMS.

  Thank you!

  Not as far as I know, because each slide of questionnaire has only one identifier...

  You could create a custom Likert question, using standard objects and having an interactive object for each question. Each interactive 'object' can have its identifier. But a question slide is considered to be "one" object, not each response.

• See the sum of subset question quiz on a blade of results

  I want to show the sum of part only of scores question quiz on a blade of results.

  I want to still follow and record the scores of questions (acting as a series of tests), but show that the score some of these question marks (final quiz) to the user. I read these steps http://blog.lilybiri.com/intermediate-score-slides but I only need a subset. I'm not getting any summing the scores showing the partition on the slide.

  Any suggestions welcome... Michelle

  Even if you need only a subset, the workflow is quite similar. I would create a variable used to store the total score for the questions in this subset. After each question to consider, you add the value of the variable cpQuizInfoLastSlidePointsscored of system to the user variable. At the end of these questions (don't forget the last of them), you will have the total score for this subset in this user variable.

• Quiz questions together Not Report - can't change

  I built a quiz using CP quiz slides - nothing personal. I saw all my quiz settings and from what I see he should report, but my results are always 0. When I look at the tab Advanced Interaction, each question is set to 0 points and the report answers column has NO for each question. I can not find how to fix these settings and am puzzled. I've built enough Quiz to find out that there is probably a box buried somewhere I did not check.

  I chose to LMS, but this isn't my problem. I can't even score for display during the test.

  I have a few questions on the quiz settings well. Why not quiz questions by default at least 1 point per question? Why no communication for the project 'activate' triggers 'Report answers' setting that I will try to find?

  I have included a few sample images. One has been truncated.

  

  

  It is not a normal questionnaire slide it's a blade to check knowledge. If you want a scored Quiz blade, use the Quiz option, instead of Quiz Question slide, check the knowledge of slide.

• What are the options for assessment 8 Captivate for the following scenario:

  I have a Captivate project with five modules, after each module, I want to have mandatory questions (users need to take and pass the course) and the optional questions (the user can jump, not included in the final grade). I use Oracle LMS. It seams Adobe changed not limited to 8 Captivate quiz preferences.

  I would like to hear from experts before making a long option. I have the opportunity to cut the project in five projects children with 5 quiz (with mandatory questions). take the quiz option questons as a sperate projects and organize them (learning objects) in the LMS to play after each module, where usage can jump.

  According to Lieve, since you need to mark the various questionnaires separately, you must have these quizzes of CP as separate files... which, as she says, is again a requirement of SCORM.

  You could put all the CP files separate together in one package with "Mode Multi-SCO" of Captivate, but in all cases I've seen, the LMS breaks those separate lessons anyway... so you will need to use the LMS to open one, go through it, close it, had him marked, open the other by the LMS, etc..

  The LMS would be the "Main file" Lieve mentions.

  If you do not NEED to see the scores of each quiz, you could put all the sections in a main CP file... then all the quizzes section would be marked cumulatively to display an overall score in the LMS...

  .. .and if your LMS supports 'interaction data' you could report on the real answers to each question to find out how well a user in each quiz section, but that again depends on your LMS capabilities (and that data meets the needs).

  Overall, however, if you need to separate the quiz scores in the main LMS interface, each quiz must be its own file. This would be the case with ANY tool you use, be a limitation of SCORM.