For a free test platform is not supported

Similar Questions

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• I need to download lightroom for my mac, but tell me can´t because the platform is not supported. Why is this?

  I need to download lightroom for my mac, but tell me can´t because the platform is not supported. Why is this?

  Make sure that your mac meets the requirement of systemhttps://helpx.adobe.com/lightroom/system-requirements.html

• I use trusteer for Bank report but it will not support the beta version firefox o 9, suggestions?

  I use trusteer for banking report, but it will not support the beta version of firefox 9, suggestions

  Trusteer informed me that a new version of their report software that is compatible with Firefox 9 is available at http://download.trusteer.com/Gcur4Wtnu/RapportSetup.exe

• Upgrade of Windows 8 "platform" Wizard not supported

  I am running Win XP SP3 in Parallels 9 (perfectly at day time) on a 3 year old iMac. As far as I can tell the iMac and Parallels has the ability for Windows 8 but I get the error "unsupported platform".

  Does anyone else have the same problem & any ideas?

  If you try to install a 64 bit version of Windows 8 on Windows XP, which is a 32-bit operating system, you need to start from the installation media and do a custom installation. See the instructions how to do this.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_8-windows_install/how-to-migrate-from-32-bit-versions-of-Windows-to/46a5b8f6-5fd3-4C67-9482-4573087480fb

• Assistant to upgrade of Windows 8 says "Platform" not supported

  I have a Lenovo Dual Core E8500 Pentium 4, 3.18 GHz, 8 GB RAM PC, with EAP, NX, and active SSE2.  I have a 2230 ViewSonic display with a resolution of 1680 x 1050 and card Intel Q35 Chipset Graphics integrated with the latest driver (6.14.10.5218).  I'm under Win/XP SP3.  This meets / exceeds the requirements of Windows 8, but whenever I run the upgrade wizard, I get a simple message "platform not taken in charge.  No details or other messages.  What can possibly be the problem, and why can't the wizard to upgrade Microsoft tell me precisely what on the platform is not supported?

  If you try to install a 64-bit version of Windows 8, you will need to boot from the DVD, you cannot start the Windows XP installation.

  To learn more:

  http://techingiteasy.WordPress.com/2013/02/14/how-to-migrate-from-32-bit-versions-of-Windows-to-Windows-8-64-bit/

• Wizard upgrade said platform not supported on the upgrade of windows 8 on xp pro 32 market sp 3

  Hi all, it drives me crazy.

  A month ago I went to install the upgrade of windows 8 on my current xp pro, at that time, put assistant level said no problem, I downloaded (and paid) the upgrade and then everything went to hell.  I ended up having to clean my original xp install to get the computer back in working order.
  Now, I decided to try again with the update (using the same product key, I tried to install with last month) so I went back to my email, write down the product key and click the link to download it again, but this time he wont even let me try.  As soon as the implementation or the Upgrade Wizard works, I immediately the message that "this platform is not supported" and that's what I get.
  As I said, I'm running a clean version of Windows XP Pro 32 with SP 3.  Any advice would be most appreciated.  Thank you very much.

  I just checked the BIOS settings and the XD card was already activated.

  The first time I started the upgrade wizard, which told me that I could indeed be upgraded, then I downloaded the upgrade and installed it.  I had some problems with the download, but nothing that was not easy to fix (I honestly don't remember exactly what the problem was).  Once the installation was apparent complete, I rebooted the computer when you are prompted and I got an error message that the installation has failed and then told me that the computer would come back on my original os.  After a few moments, I received a message that the computer failed to return to the operating system, and the computer restarted and gave me the option to boot windows 8 or windows xp.  I have tried both and neither is feasible.  After trying both, I got a new screen that says my computer need of repair.  I then re installed xp, clean boot from the floppy disk to return back at the beginning and have a computer working again. After all that, I reinstalled all the necessary updates and realized when I tried the original installation, I did turn sp2, but not sp 3 so this time I made sure to get that taken care of first.  And now, well you know where I am now!
  Thank you
  INVI.

• Drive not supported PS6100

  Hi all

  I'm looking to see if there are SCENARIOS for the error message dreaded "drive not supported" other than a player who does not EQL firmware on it.  Initially, we ordered accidentally a W347K to replace a failed drive of 600GO, which are not EQL brand, is so not surprising that we have seen the message disc not supported.  Then, we ordered a drive of one-third of the brand EQL and installed it. The label looks like a dell/EQL/enterprise storage with p/n 02R3X label, and he turns and looks like it should work fine, but we get the same error of unsupported disc.  DOA drive?  Firmware incompatibility?  No matter what else it could be?  I think somehow, the seller has replaced the Equallogic firmware, or printed their own label and slapped on top of a generic label of seagate.  I don't have a way to physically watch the disk myself so I paint no doubt some unfair conclusions.

  Thank you

  I've been double check something.  It is possible that a failed drive may show as not supported.

  There is something you can try if you can restart the table.   Remove the drive and wait two minutes.  Then restart the table.  This will failover to the other controller.  Insert the disc again and see if it shows up.  If it still comes up not supported, I would ask your salesman for another drive.

  Kind regards

  Don

• Lightroom 6.3 video clip does not play, video not supported any longer?

  LR6.3 on Windows 7:

  I noticed that the video controls appear quite in library mode, for example:

  

  Are the videos not supported anylonger? When I start this catalogue in LR5.7.1, the video works normally.

  (not quite the same catalog: catalog before upgrade to V6, so maybe the question is upgrading the catalog itself).

  Thomas

  On another Photoshop.com site as this anomaly is discussed and two people of Adobe working on a solution involving a .dll file.

  http://feedback.Photoshop.com/photoshop_family/topics/after-Lightoom-6-3-update-Lightroom-coutume-ouvert-any-vid eo-files

  At the end of the Exchange Wu Yuhong (Adobe "employee") and Simon Chen (Adobe "Computer principle") has provided this solution: "at the same time, we will release a public version of fix KB for this problem. Thank you very much for your help! »

  What is a 'public KB patch' and how do I get it?

  Thank you...

  Bill

• Thin Client T510: Do not support the SMB for no image preload on Linux platform

  Hello world

  I have a problem with a Thin Client T510 (C4G87AT #ABA), this one came with Windows CE and today I flashed with a USB to thin Pro 5 (T6X52011). When I want to deploy the image I captured (wallpaper, RD Session etc...) I have the following error:

  2015-08-19 15:30:43 [error details]:... /... / Task/linux/ImageTask_Thinpro.cpp@384: Metheod of the Image is not compatible.
  .. /.. / Task/linux/ImageTask_Thinpro.cpp@1624: do not support SMB for no image preload on Linux platform.

  When I look in the console HPDM, I see the T510 and connected

  Agent version: 4.6.3670.21244

  HDPM 4.6 SP5

  OS: T6X52011

  My OS: Windows 8.1 x 64

  Can someone help me please? Thks and have a nice day.

  Hi, thks for this Council. Theres is how I fix.

  Firstly, the master repository has change from D:\HPDM\HDPM to D:\HPDM on the server, so the configuration was not good at the moment. Another thing, the password of the user hpdm has changed in Active Directory, but not in the configuration. I changed all the settings for in line with the current configuration and capture Images of thinpro news works very well and deploy this new works pictures well too but Deplopyement of old images does not work.

  I'll open another thread if I need assistance. In this case, I'll mark as fixed.

• Just bought a Nikon D7200 camera.  Had a D7100.  With the help of ElemenD7200.  I can't go to 14 items because I have Windows Vista... platform not supported by Vista.  Looking for something to 'trigger' me with a new computer due to the fact that Vist

  Just bought a Nikon D7200 camera.  Had a D7100.  11 of the components support the camera.  Using of 11 items, the D7200 will not import the RAW files.  I can't go to 14 items because I have Windows Vista... 14 platform not supported by Vista.  Looking for something for me to 'trigger' with a new computer due to the fact that Vista can not do a bunch of stuff, so I ordered one with 14 elements.  @ I understand that 14 elements does support the Nikon D7200 because it comes with Camera Raw 9.1.   Is this correct?

  Yes PSE13 or PSE14 will support the D7200

• I use LR 4.4.  Just picked up a Sony RX100 M3 cam. Its RAW files are not supported in my version. Y at - it a free upgrade always available for my version, or what I have to buy an upgrade to LR5?

  I use LR 4.4.  Just picked up a Sony RX100 M3 cam. Its RAW files are not supported in my version. Y at - it a free upgrade always available for my version, or what I have to buy an upgrade to LR 5?

  Camera Raw plugin | Supported devices

  The Sony RX100 III was first supported by Lightroom 5.5.

  There will be no updates for older versions.

  If your choice:

  1. Update to Lightroom 5, or
  2. Download the free Adobe DNG converter, convert all the RX100 III Raw files to DNG, and then edit the DNG in Lightroom 4.4
     Using Photoshop | Digital Negative (DNG)

• Firefox not supporting type mime or video format for CW Network only (so far)

  I don't get "video Format or the MIME Type is not supported" flashed on all videos on the site of the CW Network, then the video plays. but no where else. And as with Firefox 32.0.3 in Windows 8.1/64 pro (not N or KN) and Windows 7/64 Pro on another computer.

  I have no problem with the CW using Microsoft IE videos. Not my favorite browser.

  Checked the flash updates and they are up to date.

  I made a suggested HTML5 media player 'disable' in subject: config but that did not help. Cannot find any other suggestions for my system.

  This happens in Mode safe, it works in the Flash Player when I tested it... .on a Mac. OK, I see the issue now. I think that this perhaps specific platform.

  I left the comments one maybe we can start a ticket of webcompat.com as well.

  Hold on! OK, so I reset Firefox and the video player has started playing. (I'm not kidding I was about to hit the computer.) Preferences to reset Firefox to troubleshoot and solve problems

  Note - after re-reading this it sounds like a diet or an info-ability, it was not intended.

• Firefox mobile not supported for lg optimus zip

  Hello, I have recently switched to straight talk and was sad to find that firefox mobile is not supported for the lg optimus zip. In the future, I hope that this will change.

  Hello moon_serenity, firefox does not work on your device because it has to little memory RAM (150 MB instead of the 384 needed for firefox to run). in the past there has been efforts to make firefox on android race on more than low-end devices, but the 384 seem to be the background limit which was concluded in which is possible to achieve. If I am afraid that there will be no way to make firefox run on the lg optimus zip.

  https://www.Mozilla.org/Firefox/mobile/platforms/

• "your video card drivers are not properly installed, are obsolete or are for the DARDWARE not supported"

  This message returns constantly to the illusion that after I saved this computer, using the product key and installed the FREE TRIAL of Microsoft Office version for the next 3 months. During installiation, Windows kept saying that "C drive has NO ENOUGH SPACE" and required "delete" old "unused programs", I agree, but it has never been the question on the hard disk drivers.
  I have Windows VistaHome Preimium for 3 years, (this page is not available here in your web site) and since the 19th of February2010, I read all "advising them," trying to 'restore', nothing helps. Last year the illusion was intalled easily and high speed. I've never met a single problem, the same computer, same material, just suddenly become 'unsupported', I need Windows just restore all my setting back and stop deleting my settings and downloads. How can I restore material that has been removed from Windows from my computer? Help, please.

  ArgonautAmber,
  Then you get this error from the program of Secondlife or do you have other programs as well?  How much free space is on your hard drive?  Have you updated your driver video crad lately? You have an active antivirus program running?  If so, is up to date and you have scanned your system lately?

  What I suggest you to start with:
  Run the disk error check to see if there is any problem with the player.

  Check the free space on the hard disk.  If you run very low then you may need to delete the old unused programs or to archive documents of CD Si you have not emptied the trash lately, do the same.

  If you do not have an antivirus running, then take a look at these:

  Get rid of malware

  Can I clean an already infected computer?

  Check the video card manufacturer's Web site and download the latest driver for your hardware.

  Let us know the results.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.