Satellite L300D will not recognize USB drive, except if the WIFI is disabled

Similar Questions

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• WMP11 does not recognize USB drives

  I have 2 laptops, the two Vista running. Both have WMP 11. We recognize USB drives in WMP11 and allows playlist to copy to them. The other laptop recognize USB drives (I have a variety of brands and sizes) in Win Explorer, will play the music of their share in WMP11 but will not recognize USB keys for use with copy of the lists of reading or synchronization. Sync, refresh devices does not help. Same result if USB is directly connect to the laptop or connected via USB multi hub. USB key works perfectly in all other respects, but WMP11 is unable to locate one of them.

  Hi MarcGG,

  ·        At the devices detected before?

  ·        Do you remember the last changes before the show?

  1. check if the sync settings are correct. To do this, follow these steps.

  a. open Windows Media Player.

  b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

  c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

  d. restart the media player.

  e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

  For more information, please see the link below: set up a device to sync in Windows Media Player:http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  2. Add a device to sync in Windows Media Player.

  a. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.

  (b) read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.

  c. selection of automatic syncing means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".

  d. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.

  e. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.

  For more information on "Windows Media Player sync: frequently asked questions" visit this link:http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L30 will not recognize battery

  Hi guys

  Having a problem with my battery.

  The battery itself is not so old and works in another machine. My current L30 for some reason any will not recognize the battery. When the captain came out of the computer does not use the battery. It sometimes happens with a bright orange at the front as if his load, but he never goes green.

  Other times where the battery icon is in the lower right corner, it has a cross through the battery icon as if it does not exist.
  All ideas

  Remove the battery and connect your laptop to the power running, start Windows and when the OS is fully charged, put the battery in the place again.

  The battery is correctly recognized?

• MacBook Air will not recognize Micro SD disk in the format exFAT

  Hello

  I have a new camera of Campark Xtreme (like a Go Pro) who uses a Micro SD disk in ex FAT format. My 3 year old MacBook Air does not recognize the disc in this format. But to reformat, I need to erase all the content on the disc. When I put the disc in the camera, the camera will not work unless I have reformat the drive for exFAT.

  My computer is 10.10.5. So my husband. We have the same problem on two laptops.

  Anyone have any ideas?

  The Mac can read and write to exFat without problem. The problem is probably that the card is too recent for the readers into your computers.

  Fortunately, a new stand-alone USB drive which takes care of these maps is cheap.

• Satellite A660 - will not start initialize drive HARD failure

  Hello
  first of all thank you for your time.

  Model: Satellite A660 (PSAW3A-07U00R)

  The problem started yesterday, the computer has been going slowly as a closed application, so I held the off button until the pc is turned off. When I restarded the laptop, it went to a screen saying: start windows normally or repair Windows (recommended)

  When started normally it hangs just a blank screen, repair Windows recommends a system restore to a previous point that did not work. As it crashes again. I tried pressing F8 and boot in safe mode, but even once it just hangs. Then, after having repeatedly tried safe mode and another system restore the computer then hangs when I press F8. After that, the computer passes in front of the Toshiba logo with F2 and F12 options screen (which still works) and then it rises the initialization has failed then shuts off and comes with start-up bootfailed failed with a few numbers and letters, then it goes to a small box entitled menu starting with 4 options. These are some
  Toshiba MK6465GSX HDD/SSD
  CD/DVD MAST * UJ141ES ABD - CMB
  FLOPPY DRIVE
  LAN

  If I press ESC, it passes through the loop of bootfailed and ends at the same screen, if I press on enter "HDD/SSD Toshiba MK6465GSX" then he quickly returned to the screen and at the bottom it says [HDD/SSD Toshiba MK6465GSX] failed.

  I do not understand why it has gotten worse over time. Can anyone think why it occurred and more importantly, how can I get my pc working again? Note: held 0 then start does nothing for me atm

  Best regards, Matthew

  Hello Matthew,.

  To be honest, I agree with Akuma and it could be related to a dysfunction of HDD the error you described, but ensure 100% there s no software problem, you should try the Toshiba Recovery disk Windows installation. Something may be confused until the Windows installation and recovery of files on the HARD drive, so it cannot be started. Recovery disc will resolve this problem by formatting the HARD drive and restoring the settings box.

  If it still doesn t it work s hardware malfunction but an authorized service provider can solve these problems under warranty for free. So just contact the guy and ask for help. ;)

  If you have other questions or already solved the problem, please let us know!

• Satellite L300D will not start

  Hello

  I have a satellite L300D 11v. Power I have three lights green, power, suite and battery, DVD looking for some time nothing happens.

  Tried many things.
  Interchangeability and remove the ram with restarts
  Removing and replacing HD
  Remove the battery, hold the power button for a minute then power application and try to turn on,.
  As above with the battery.
  None of the above has worked, I suspect either of the BIOS chip lost his memory or it is fried.
  I will try to reinstall the BIOS memory, but without the work of the OS I'm not sure how do.
  And I'm not sure that the update of the BIOS I downloaded from Toshiba is correct because of the manual I downloaded was the L350, and yes I have enter the correct details to try three times. Neither seem to be able to know which is the BIOS. I would be grateful if someone could suggest what's wrong with the laptop or the update of the BIOS with the laptop in its current state. And if anyone knows what variant of the BIOS, is that I would also be grateful for this information.

  P.S. I noticed that the same problem was raised on August 12, 2012 with no resolution found.

  On this virtual path t is not easy to offer accurate diagnosis and to say with certainty what the problem is here, but somehow, I think that your BIOS chip is damaged. BIOS update will not help you with that.
  When you start your laptop is stays on or turns off after a certain period of time?

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• Satellite L550 does not recognize USB Headset

  Hey,.
  I have a Satellite L550 and buyed yesterday a USB headset but my laptop does not see somehting when I put the USB in the port?

  How can I solve this problem?

  Have you noticed the same situation using all USB ports?
  Other USB devices are correctly recognized?
  What operating system do you use?
  Use of the original BONES you with your laptop?

• Computer will not recognize USB printers

  Original title: no USB connection recognized computer to the printer

  I use windows 7 64-bit. I use a HP Deskjet 2050 for 3 years... all of a sudden he says computer is not connected to the printer. I uninstalled and reinstalled the printer drivers, still nothing. I bought a new printer and the computer still does not recognize a USB connection of the computer to the printer (HP Officejet 2620).

  Michelle,

  Thank you for keeping us posted.

  I'd like you to try this article-

  http://support.Microsoft.com/kb/2654149/en-us

  Please let us know if that helps.

• My player will not recognize a drive Optiarc DVD RW AD - 7203 A ATA Device

  I insert a disc and the drive does not recognize the disc whether it's a program, CD, DVD, etc.  I uninstalled the drive and then restarted is drivers re-installed but it still does not work.  What is the next step short of getting a new drive?

  On Thu, 20 Sep 2012 14:25:35 + 0000, Cameron O wrote:

  Considering that it has moving parts, they can break or wear out. Something to try, would be to get your hands on a cleaning disc and run a few times. You can get them cheap from most department stores, but I've also seen convenience stores as well.

  It does not hurt to try one, of course, but my experience with these
  cleaning discs, it's that they are unnecessary and do not help. It is likely
  that the drive must be replaced.
  Ken Blake, Microsoft MVP

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L640 - does not recognize USB and does not start webcam

  Hello

  I regularly get the pop up usb malfunction when built in webcam fails to launch, I booked service, but now it works again. Any ideas what causes this and how can I prevent in the future? My family is abroad, and its function that I use more.

  Thanks in advance.

  Hi europacific,.

  > I get a pop up usb malfunction
  This popup you get exactly? You can post a screenshot of this message? This would be useful.

  Sorry, but what to say on this subject? Some clarification would be useful, and no one knows what operating system you have.

  If you have some problems with the webcam I would try to update the driver for the webcam. You can download it from the official website of Toshiba.