Foreign mobile - by cartridge Hp French HP6480

Similar Questions

• Logon key Bluetooth does not recognize mobile phones during the installation procedure

  Hello

  My Portege M400 with bluetooth stack 4.00.25 (bought in July 2006) doesn't recognize any mobile phone during the implementation of how to connect key wireless - except once with a foreign mobile PHONE a few days ago.

  Mobile phones are also recognized as bluetooth devices, only the logon key wireless implemented the procedure shows:
  "No mobile phone not found, check if bluetooth is enabled" (in German, so this formulation is my translation).
  To my confusion, I tried to connect with someone elses phone to make sure that this isn't my phone (MDA) and this foreign phone has been recognised at the time. I'm not throughout the implementation of procedure, as I didn't want someone elses phone to log on my computer.

  Now, a few days later, I decided along with that foreign mobile, just to check the operation of the entire wireless log on procedure, but now the phone that worked a few days ago is not recognized, too?

  I can't find out what is the cause. Is there anyone who has an idea?

  Help would be very appreciated.

  Kind regards

  Papak

  Have you turned on the Bluetooth on the laptop with FN + F8?

• I put four new ink cartridges, now the photos are drops with ink, literally dripping.

  My ink was low, so I put four new cartridges in French - Photo, Cyan, Magenta, yellow.  Using HP Advanced Glossy Photo paper, and photos are drops with ink.  Please notify.

  Four new ink cartridges caused my photos to drip with ink.

• How to locate a file DSN path (e.g. "C:\Program Files\Common Files\Data Sources\mydata.dsn"changes to C:\Program Files\Fichiers communs\ODBC\Data Sources\mydata.dsn"in French")

  Use us the DSN file in our application LabVIEW but have found that, when the application is distributed to Windows XP configured for foreign lanugages (e.g. French), the C:\Program Files\Common Files is localized to something else (for example C:\Program Files\Fichiers common).

  How can you change Setup to handle these problems? Or how we can programmatically determine the correct path of common files (i.e. localized) what, so we can copy the DSN files in the folder when the application first runs?

  You can also read a large number of paths by using the register screw

  The paths are in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders or in the HKEY_CURRENT_USER folder.

• cannot display foreign languages

  so, my computer shows some foreign laguages like Spanish, German, french, latin, ect ect ect with the latin alphabet.  but when I try to find things to other characters such as Japanese kanji or thingslike than, when I try to copy/paste, I just get small boxes.  When I look, there are boxes, but they have numbers in them.

  so, my computer shows some foreign laguages like Spanish, German, french, latin, ect ect ect with the latin alphabet.  but when I try to find things to other characters such as Japanese kanji or thingslike than, when I try to copy/paste, I just get small boxes.  When I look, there are boxes, but they have numbers in them.

  Open the page of foreign language > menubar, view > Encoding > more > select the appropriate language to decode.

  t-4-2

• Portege M800 - I canceled the installation of Windows

  I am in receipt of a brand new * Toshiba Portégé M800-100 portable *, model Netherland, but
  I made a mistake when I started using and I need your help, assistance what to do.

  (* 1) * I just powered by the computer laptop and works in a first time, without any instructions, reading
  and he began to load Windows Vista, but when he chose the English language without accepting that,
  without pushing OK I was asked to cancel the installation. I decided to stop the installation
  and take care of the user manual. Then I pushed "Cancel" and offer "turn off." The laptop shut down regularly.

  (* 2) * then I read in the manuals:
  * "Once you turn the unit on for the first time, do not turn off it until you have configured"
  the operating system. » *

  (* 3) * but I did as it was offered by the program, so that the statement was late to TI

  (* 4) *. Pls advice what to do, how to continue to not lose the Windows Vista, what I need
  in English (I'm foreign) not in Dutch and French languages.

  (* 5) * I have not fed a Notebook again and wait, waiting for your instructions
  What to do.

  In your case, I might start Notepad and see what he does. Maybe the installation starts again but I do not know Mr. I never did.

  In the worst cases, you must order a drive recovery Toshiba directly or an authorized service provider.
  But try first what is the laptop.

• Change the region on a C3180 printer

  Hello!

  I just moved to France with my beloved C3180 printer and need to change the region on this matter to take printer cartridges HP French... but support HP on the phone tells me because my printer is 6 years old, it is obsolete and that they do not give me area at the entrance codes.

  I can't believe! It is a great printer, that I use a LOT (like the journos) and I am very happy with and you won't have to buy a new (which obviously won't HP)... I already changed the region formerly of HK to the Japan (assistance telephone Japanese was beautiful and very useful). Can someone give me the codes of the Japan to Europe?

  Thank you very much!!!

  Update after receipt of oranginasanguin

  I called them today, I don't know what you tell them but I transferred to technical support, where a man sent me to buy new cartridges French and out my Japanese those and then when I called to say I, another man told me to put them in and then when I did he put me on hold and then came back and told me he would send me a new printer C1380 the next week!

  It was a little weird... but in any case, thank you very much for your help, I could not have resolved the situation without your help in this climbing...

  While I was doing this, I realized every PC in the House was HP, and reminded me that I chose this brand because it is one that I trust for its longevity and reliability.

  Thank you very much

  Best regards

  oranginasanguin

  Hi oranginasanguin,

  I am pleased to hear that the problem has been resolved. Have a wonderful evening.

• Use Mobile French in Russia

  I have a mobile phone number French that my parents have a configuration on Skype to Go. Now, I'm travelling to the Russia. Can we still use the Skype to go number although it was setup for the France (UK in France)

  Probably your parents set up Skype to Go with their location that the United Kingdom and converted S2G your number of portable French at a local UK number so your parents pay for a local call from UK and Skype rates to a French mobile network.

  Sort of, if you travel in Russia can always call by the same method, but you will have to pay roaming charges for using your French mobile on a Russian network that could be very expensive. You need to check your network roaming charges for outside the EU.

• HP Officejet Mobile Printe 100: Almost nine Officejet100 HP printer does not print black ink cartridge. No low or empty light show

  My 100 Officejet is less than 12 months old and has been rarely used. So far, it has printed perfectly. Now, it will printer color points, but don't print the black ink cartridge.

  There is no light showing on the Control Panel indicates that the cartridge is low or empy. Also, printing little that was made, it is impossible that he be empy so early.

  Someone at - it suggestions?

  Thank you very much.

  Hello and welcome to the community of HP @Pete226,

  I understand that you can not print black ink with your HP Officejet 100. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Mobile printers HP Officejet 100 (L411a and L411b) - solving print quality problems

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Can I optimize my old site made with Dreamweaver CS5 for mobile? If the answer is Yes, it's a big job to do or not (sorry for my English, I'm french)

  I want to know if it's a big job to change my site developed with Dreamweaver CS 5. Google ask me to update this Web site for mobile phone.

  most of the people are the real web on a smartphone stupid research

  

• If I buy a T-Mobile unlocked iphone7, can I use the sim card by carrier other than T-mobile on the iphone7? Because I travel abroad from time to time, I wonder if the unlocked Tmobile iphone7 accept any sim card when I am abroad

  If I buy a T-Mobile unlocked iphone7, can I use the sim card by carrier other than T-mobile on the iphone7? Because I travel abroad from time to time, I need to use another sim card when I'm outside of US. So if I order a T-mobile unlocked iphone7, he will accept my sim card from a foreign carrier? In addition, he will accept my 2nd sim card which is Sprint (my sprint sim card is not related to a device)?

  An unlocked iPhone for use with any compatible GSM carrier.

  Sprint is NOT a GSM carrier. They are a CDMA carrier.

• Memory allocated for mobility radeon on Satellite A100-768 graphics card

  Hello, I am french and I have a Toshiba Satellite A100-768,
  graphics memory of my lapto is like this:

  Graphics processor / vendor: ATI Mobility Radeon X 1400 HyperMemory to 512 MB - PCI Express x 16
  Video memory: DDR SDRAM - 128 MB
  Maximum allowed size of RAM: 384 MB

  I am looking for the location of the adjustment of the exclussive of 384 MB RAM) I want to change this amount (in fact it is 384 and I want to reduce to 128 or 0 in order to keep only the 128 MB) I looked in the bios and I found nothing

  Thank you and excuse my English

  Hello

  It is not possible.
  As far as I know, you cannot change this value manually.
  The graphics card controls the HyperMemory and assigns this value automatically.

  If you want to have more RAM (main memory) and then update the modules of memory on your laptop
  2 GB (2 x 1024MB) are recommended.

  Good bye

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• Windows6. 1 KB2259539-french - x 86 update which is prerequest for IE 9

  When I tried to install Windows6. 1 KB2259539-french - x 86 update this message: Setup encountered an error: 0x8007000d invalid data

  What can I do?

  just this update every thing is fine with me.

  Thanks for everyone tried here.

  I found that the University network is causing my problem. Danielle I used my mobile phone and the update file has been successfully installed.

• Code 19: Windows Mobile Device icon not found on my computer

  Original title: Windows Mobile Device icon not found on my computer

  Hello

  I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.

  Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.

  In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).

  Hi AlgeriaRocks,

  I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.

  For more information see the link:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the device in Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You see the support of HP at following link and try to update the latest version of the drivers.

  HP iPAQ h1900 Pocket PC series-download drivers and software

  For more information, you can also consult the following link:

  Error conditions (performance, beeps, etc.)

  Hope this information is useful.