forever to load windows

Similar Questions

• Computer is very slow to download programs, especially at the start and when I try to watch a video clip, it takes forever to load.

  Original title: slow and jerky

  My computer is very slow to download programs, especially at the start.  I tried to reduce the programs start, but in vain.  Also when I try to watch a video clip, it takes forever to load, and then when he does, she plays in 2-3 seconds intervals.  Help

  Hi LouisBode,

  1 Windows operating system you are using?

  2 did you a recent software or hardware changes to the system?

  3. What is the brand and model of the computer?

  4. what program you use to play the videos?

  5. this happens with all the videos that you try to play?

  Method 1:

  If you are using Windows 7, you can run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance

  If you use Windows Vista, then try to run the Fixit from the link:

  Difficulty of Windows system performance slow computer problems

  Method 2:

  You can read the article and try the steps to solve the problem:

  How to resolve performance issues during startup in Windows Vista

  Note: This article also applies to Windows 7.

  Method 3:

  You can also refer to the computer or the device manufacturer's Web site and install the latest version of the drivers for graphics cards.

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

• my computer takes forever to load

  original title: loading

  my computer takes forever to load, it did not have it an hour ago. And a message pops up saying something about the script to stop work or something like that. Just started this about 45 minutes ago. What can I do to fix this? I have to reset if the manufacturer or what? Help, please

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________________

  If you ever have to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Impossible to load Windows Vista, screen stuck at the loading screen (green cursor will move to the right)

  Last night I tried to Hibernate my laptop (Windows Vista 64-bit), but it took forever so I held the power button to stop it. When I started it today, however, it would not load windows. I tried loading in safe mode, but it stops at crcdisk.sys. I tried using the automatic repair tool to find issues. The first time, it took about 2 hours to fix, but once it asks me to click 'Finish' to restart, it restarts and arrives at the black screen with the Green loading thing goes from left to right. It remains to this screen for minutes, hours. I also tried to boot from the last known good configuration, and this does not work either. I tried to restore to a previous point, but there was no previous system restore point. Windows was working fine the night before.

  Thanks in advance for any help.

  Sean

  The symptoms you describe point to a faulty hard drive. Hard drives can appear to fail suddenly like this so the fact that he was 'before' is irrelevant. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• After the mistake of automatic updates 'there was a problem loading windows.

  OT: Error loading Windows.

  Error loading Windows, it's where my problems began. Windows was its automatic update downloads and when he finished and my computer says to restart when it restarted I got the message 'there was a problem loading of windows', and that's where it ended. For three days I would continue to try to restart my computer, and I had the same thing. Windows would not be responsible.

  So, I did a refresh, or everything what he called where he was supposed to completely refresh Windows without my lose all my files, but I have to re - install programs. It took forever for that to work, but he finally did and my computer was back to Windows 8 and when I went to the Windows store to download Windows 8.1 told me that I had to first download and install the updates. From that moment nothing works. It finally downloaded 123 updates up-to-date, but when he tried to install it like configuration updates do not turn off your computer. It would get 12% full and just stand there, literally for hours. If I turn off the computer and try to start again he would go immediately to the configuration updates, 12% complete and even once, just to stay there. Then he got to ' default configuration windows updates returning changes do not turn off your computer. " Now he sits there for hours. I tried turning stop then restart and it goes immediately to the failure message and returning change and just sits.

  What I'm doing, I've been without this computer for three days. I'm on my mac now, but my personal computing is done on the pc that will not start. Windows is undesirable. Someone help me please. I got so frustrated that I am about to go out and just buy a new computer.

  Help!

  If it was my computer, I would do a factory reset is in mint condition, only install the required update, KB2871389 (download links above), then immediately install the update 8.1 and the remaining plots.

  After these 4 things, the only thing I would do is then to save a system image backup so you never have to repeat these steps.

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Firefox 7 takes forever to load certain pages, or does not load completely, have markers from place to place and place images...

  Had the same problems with 6 Ff. 1/4 to 1/3 of the pages take forever to load. Sometimes I can make by highlighting the URL and pressing Enter. Sometimes the activity indicator turn right and pirouettes and page never loads. Mark-up appear sometimes where the images should be. Home of the New York Times, for example, partially supported (some missing images) but the links to take forever.

  Open the topic: config page through the address bar and do a search for network.http via the filter at the top of the about: config page.
  
  You can reset all network.http associated prefs which appear "BOLD" (user set) via the context menu to their default values.

  It is generally not a good idea to change these preferences, and these changes can have the opposite effect, by activating especially pipelining for servers that do not support this feature.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• I need to display a corporate tutorial site which is only supported by Microsoft Windows.  Is it possible to load windows on an external hard drive and a MacBook to view the Web site?

  I need to post a tutorial for some training company corporate site only supports Microsoft Windows.  I'll buy a MacBook in the coming weeks when I go to training and I wonder if there is a way to load windows on an external drive and launch it on my MacBook?  I know you can use bootcamp, but I don't want to burn up that much of my Flash memory by placing it on the MacBook itself.  I have a 1 to Seagate that I use on my iMac at home for Time Machine.  Could just operate with Windows on it to visit the society tutorial with my MacBook?

  Boot Camp will not allow that.

  It is possible that one of the many emulators Windows for Mac can allow you to run with such a disk configuration.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Satellite 1410 801 stops loading Windows - corrupt files

  For several months I have problems at the start of my laptop: it will restart several times, stop to perform the will of loading windows; Sometimes I get start of message (registry) files are corrupted etc. In most cases, it will start after several tests correctly. I already reinstalled (clean disk) made several memory and disc of the controls without any error message. What can be the reason for this problem?

  I intend to replace the memory card or HARD drive BUT if this should solve the problem. Can someone give some advice or tips?

  Hello

  On this path, it is not easy to give a correct diagnosis. If the problem persists after the installation of clean operating system, in my opinion, you should check HARD drive first (upgrades and hope that other hardware components are original without).

  Try to get another HARD drive, Exchange and install the OS by using recovery media. In my opinion, it should be the first step.

• Re: Satellite L670D does not load windows

  Hi, I have a toshiba L670D, who recently had a windows update and since then, every time I try to turn it on will not load windows, but just comes up with the error "error fatal c0000034 application update operation 207 0f 102311 (_00000...)"

  Is there anyway I can fix it myself or is it a case of calling an expert or even go shopping for a new?

  Try to start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool.

  Please post comments.

• Satellite L40-170 - cannot access the parition of disc to load Windows XP Home edition

  I downloaded Intel storage disk manager 32 bit on my flash. I hit F6 again to load Windows XP Home edition, but it tells me that the startup of Windows XP Home edition program is impossible to access the disk containing the partition.
  What software do I need?

  Hello

  This will help your for sure:

  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Check this doc from Toshiba and post feedback after installing the SATA driver.

  Concerning

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• How to load Windows "On-screen keyboard" application using LabVIEW

  Hello

  If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW.

  Kind regards

  Bharath