Similar Questions

• Which format is the best one?

  Can you help me with the different methods that can be used to transfer data from the server to the BlackBerry device and what should be the appropriate format of the server response.

  As it is better to use XML or HTML or txt, or do you think that any other format will be a better option.

  Thank you.

  Isabelle

  In the case, the server response is short and simple - use the text format.

  In the case of the response from the server is complex and there are nested, as data structures

  +Address
  |---- Name
  |----- Street
  |----- Home phone
  |------ Company
  |--------Company title
  |--------Company street
  |--------Company zip
  |--------Company phone 
  

  -use XML in this case.

• Problem connecting to the server by using the url with the logical name!

  Hi all!

  I looked for information on this subject, but have not seem to found a solution.

  I'm developing a Smartphone application that needs to connect to a server to retrieve data. Then I use a direct connection with the correct settings (I hope):

  URL = "url of the server" + "deviceside:true" + "AFN:...» »

  The problem is that the connection should be done without Hardcoding the "apn". These are the tests I've done so far (assuming I'm always add the ' deviceside: true ' parameter):

  URL (logical name) + AFN OK!
  FAILURE of the URL (logical name)
  URL (static IP) OK!

  * by logical name, I mean a url as www.google.com

  What I need is to use the logical name, without the parameter apn!  Maybe I'm missing another parameter that I don't know?

  Some additional info that might be useful! :

  -The server is a server of Vodafone, which, as has been explained to me, should be on the list of white of the RIM (not sure what that means, but I guess it has to do with the fact that BB connection through the RIM at one point servers, and be in this list gives a sort of 'privilege' when you browse servers of RIM) , and I don't know it is publicly accessible as (see following)

  -An android version of the application works fine without Hardcoding the AFN and using the logical name (I guess it has to do with the RIM servers!)

  Any help or ideas towards the solution that it is greatly appreciated!  If I'm missing some info that you think I should add! Please tell me!

  Thanks for your help!

  Juan

  Thanks Peter!

  I could solve it by looking at the code of the alternative of the Api network in the link sent you me!

  The solution was the addition of the ConnectionUID parameter to the url String!  as to why this solves the problem I still don't understand it! (If you can enlighten me with the reason, I would be very grateful)

  This value is found in the service books!, I have the zip code just in case it helps someone!

  Hogshead string = null;

  Full book sb = ServiceBook.getSB ();

  Reviews [] ServiceRecord = sb.getRecords ();

  for (int i = 0; i)< records.length;="">

  {

  String cid = records [i] .getCid () .toLowerCase ();

  String uid = records [i] .getUid () .toLowerCase ();

  If ((cid.indexOf ("wptcp")! = - 1) & (uid.indexOf ("wifi") ==-1) & (uid.indexOf ("mms") ==-1))

  {

  Hogshead = records [i] .getUid ();

  }

  }

  then add the parameter: ConnectionUID = Hogshead

  Once again, thank you!

• Download "invalid format" on the computer connecting HP TV to the tv screen.

  Original title: hp pavilion g6 does not connect to the tv via a hdmi cable. (Tv says 'Invalid Format)

  Hi, im trying to connect my computer to my TV using a hdmi cable and I change the resolution of the screen, and it still says "invalid format" on the TV screen.

  Hi, in pot

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it looks like the resolution is not correct when you connect the computer to a TV.

  I have these steps that should help you with this problem.

  Visit this link and indicate "connect your computer to your TV.

  Hope this information helps. Answer us queries windows and we will be happy to help.

• vCOP URl not start 'unable to connect to the server.

  I have deployed VMware vCenter Operation Manager version 5.7.1.0 on the ESXi 5.0 U2 Build #914586 host machine. Two virtual machines (VM Analytics & UI VM) are lit under the VAPP but vCenter URL of the Manager of the operation does not start and invites 'impossible to connect to the server' browser error message.

  Please help...

  Since it is a whole new setup I recommend the vApp redelpoy and try again.

  The other option is to connect to the vm user interface and check the logs for anything suspicious.

  Thank you

  Alex D.

• Format of the connection string to connect to Oracle DB via LDAP

  Hello
  
  I have an Oracle database and its details are configured in LDAP. I have the c# code that I want to connect to Oracle DB using LDAP details. So I wrote the code to connect to the Oracle DB, but not able to connect. Implementation error at the con. Open() statement: "ORA-12154: TNS: could not resolve the connect identifier specified.
  
  Code:
  --------
  String s = "Data Source = @ldap://abc.pq.xyz.com: 11389/myldap, cn = OracleContext, dc = pq, dc = xyz, dc = com; User Id = MyDB; Password = MyPass";
  
  Con OracleConnection = new OracleConnection (constr.);
  con. Open();
  
  I need help in the formation of the connection string.

  user8786648 wrote:
  Hello

  I have an Oracle database and its details are configured in LDAP. I have the c# code that I want to connect to Oracle DB using LDAP details. So I wrote the code to connect to the Oracle DB, but not able to connect. Implementation error at the con. Open() statement: "ORA-12154: TNS: could not resolve the connect identifier specified.

  Code:
  --------
  String s = "Data Source = @ldap://xyz.us.oracle.com: 11389/xyz_ldap, cn = OracleContext, dc =, dc = oracle, dc = com; User Id = xyz; Password = xyz";

  Con OracleConnection = new OracleConnection (constr.);
  con. Open();

  I need help in the formation of the connection string.

  This isn't how you use LDAP for Oracle name resolution.

  You must configure the LDAP protocol. ORA and SQLNET. ORA files properly.

  For example, you can review the LDAP protocol. Documentation of ORA here:

  http://docs.Oracle.com/CD/E11882_01/network.112/e10835/LDAP.htm#i500397

  And the SQLNET. Documentation of ORA here:

  http://docs.Oracle.com/CD/E11882_01/network.112/e10835/SQLNET.htm#i500318

  A quick search on the terms "example of oracle ldap.ora", shot to the top of several examples.

  Also, if these are real values that you posted in your example of a connection string, you can change.

• Oracle Forms URL not accessible outside the server

  Dear all,

  I am facing problems of access to the URL of Forms under Oracle Forms 11 g when you access from the server.

  Intended to test, I created a new Oracle Forms on a VMWare Server environment.

  Details on my environment

  Windows 2008 R2 64-bit Server

  Oracle Web Logic Server 11g R1 64-bit

  Oracle 11 g R2 64-bit forms and reports

  Oracle Database 11 g R2 64 bit

  Virtual machine network connection works fine. I am able to Remote Desktop, sqlplus and access the Admin of WebLogic Console (port 7002) from my local system.

  But when connecting to the URL of the form it does not connect. It gives me the following error. Forms URL works fine when accessing the server.

  It seems you're connected to the Internet, but you might want to try to reconnect to the Internet.

  
  

  By using the following URL format to access the Forms http://formsserver:7007/forms/frmservlet? config = < appname >

  
  

  Please let me know if anyone has the solution.

  Thank you

  Mohamed Yusuf Salih
  

  Be careful when you make changes.  If you are not familiar with the operation of the listeners, you can easily make a problem worse.  Assuming that you have installed using the "Deployment" installation option, the default non - ssl ports must be as follows:

  OSH - 8888

  Server administration WLS - 7001

  WLS_FORM - 9001

  WLS_REPORTS - 9002

  Once configured correctly, calling the forms or reports occurs through the same port of OSH.  Thus, for example:

  http://server:8888/forms/frmservlet ...

  http://server:8888/reports/rwservlet ...

• Thunderbird connects to the server and starts downloading the messages, but none don't go down

  Thunderbird has worked fine until today. I open the program and click download messages. Thunderbird connects the server normally and I get a message like usual 'download message 1 (etc.)", but nothing happens then. No message appears.

  I can download on my smart phone messages or view on the server site but really need them on my PC

  I use Windows 8.1.

  Any suggestions gratefully accepted. Thank you

  Try to load the first message online with webmail and see if that frees the flow. Sometimes a message in the wrong format can hang things up.

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the server on my HP Officejet Pro 8100 eprint

  I bought this printer a few months ago and had no problems of implementation. It is configured as a wireless printer and I allowed him to install his own IP (use DHCP). EPrint configuration was also easy to implement.
  
  Last week, it was necessary for me to set up my network home, consisting of 3 computers, NAS QNAP, IPAD3, HP printer, with static IP addresses.
  To set a static IP address on my printer, I had to reset the printer, uninstall the software and drivers and reinstall. Everything is going well until I tried to connect to the eprint server by using the embeddeded web server (EWS). It wouldn't let me connect to the server. I went into the settings of web services, but not a not to connect to the server in one of the topics. On the printer, the symbol wireless is turned on and the printer works with all my devices on the network, but the EPRINT symbol is turned off and not be in power switch manually.
  (My main computer is a HP Envy 17 under Windows 7 Ultimate and the printer has been configured using this computer. 2 other computers running Windows XP
  I would appreciate your help. Thank you very much

  Hi VisionAiry,

  Received an email from HP no later than April 4, after I had been hunting them for a response. I've been away for a few days, so today was the first opportunity to try the HP suggestions, they were as follows:-

  We recommend that you do the following:

  Please, check the following:
  You have a MAC filter or the firewall of the router may be blocking the signal?

  Please proceed as follows:
  -Perform a reset of the NVM on the printer, please find the below steps.
  -update the firmware of the printer, please find the below steps.
  -connect the printer to the router with the Wireless Setup Wizard (dynamic IP address)
  Press the button on your printer wireless
  Choose settings
  Choose Wireless Setup Wizard
  -Enter Google's DNS servers in the EWS (built-in web server) the printer
  Click the Networking tab
  on the left side choose wireless (802.11)
  in verifying the Configuration of DNS manual DNS server address
  in manual preferred DNS 8.8.8.8 Server type
  in auxiliary DNS server, type 8.8.4.4

  -enable Web services
  -If this does not work, please provide us with the exact error message.

  Execution of the NVM reset
  NOTE: Be sure to keep the ink supplies in the unit to avoid to reset the State of the initialization of the device.

  1. press the Power button to turn off the product.

  2. with the product off, press in and hold the wireless button and the button (the button with the rectangle and arrow) and then press the power button.

  3. release all buttons.

  4. wait while the product resets. The screen stays on during the reset process.
  When the on stop button lights or flashes, the product is ready for use.

  Firmware update
  Please follow the link on the hp site for an update of the firmware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5218794&LC=en&cc=UK&DLC=en&lang=en&cc=UK

  It is absolutely vital that this update via a USB cable or ethernet so it is physically wired to the printer. An update of firmware through a wireless connection is NOT recommended and may cause other problems with your printer.

  I have also attached the link for the User Guide in case you want to review.

  https://external1.collaboration.HP.com/external/tecteam/Shared%20Documents/product%20Line%20Files/TEC%20Inkjet/UG%20OJ%20PRO%208100.PDF

  AirPrint

  Please update firmware as explained above.

  Please turn on the router, the printer and the iPad. Important first to reboot the router.

  Make sure that the product is connected wireless to the same subnet as your iOS device.
  Check if the printers EWS accessible from Safari on the iPhone/iPad (insert the IP address in the URL field). If this is not possible, then the iPad/iPhone not be connected to the same network as the printer. Open system preferences, and then select the network

  After suggestions from HP and after having re-recorded with eprint and after the email address for a new another eprint choosing, I can now use eprint and print from my IPad with all devices on my network using static IP addresses.

  (I don't have to change all the settings on my router)

  Thanks again for all your help and suggestions along the way

• Secondary HA failover of the server URL does not

  Hi all

  Ive set up a Foglight HA environment but I keep having a problem getting the fail URL to work.

  e.g. the IP address of the primary server 10.10.10.1 (active)

  When I type the IP address in the browser to test whether it will redirect to the primary server (active), he gives a page cannot be secondary servers display message.

  Can some please help?

  Concerning

  CM

  Is this also the case if you primary fails?  If the primary is in place and running the day before may be not accepting connections.

  Check this box

  https://support.quest.com/SolutionDetail.aspx?ID=SOL46114&PR=Foglight

  46114 knowledge article

  RSS subscription

  close

  The solution that you want to subscribe covers a number of software products from Dell. Please choose the one that is of primary interest;

  
   

  Foglight

   
  • Return

  • Title

    In a Foglight HA installation what URL you hit to access the console?

  • Description

  Question: In a high availability installation Foglight what URL you hit to access the console? You have to know which server is primary and hit this one, or if the server goes down you are automatically redirected to the correct FMS?

  • Resolution

  Answer: You need to hit the URL of the primary there is no common URL. Using a proxy is the way to give users a common URL and automatic redirection in the event of failure of the primary.

  and this

  http://eDOCS.quest.com/Foglight/567/files/FoglightHighAvailability_Field.PDF

  "Mode high availability is a configuration of multiple Foglight management servers in a cluster where a Management Server is the primary server and the others are backup servers. If the primary server stops responding, one of the servers in the cluster HA standby takes over the responsibility of monitoring. HA mode uses redundancy and failover to ensure that Foglight monitoring continues without interruption. "

  Golan

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• HTTPS connection to the server using the connection

  Hello! It is a part of my code to connect to a secure server.

  However, it is not show me if the connection has been connected. Is there something wrong with my code?

  ' Public Sub validateUser (String usernamelogin, String passwordlogin) throws IOException {}

  HttpsConnection httpConn = null;
  String url = "https://myserverpage/login?";
  InputStream is = null;
  OutputStream os = null;
      
  Cookie string ="";
  Params string;
  params = 'name =' + usernamelogin;
  params += "& password =" + passwordlogin.replace (' ', '+');

  try {}
  Open an HTTPs connection object
  httpConn = (HttpsConnection) Connector.open (url + params);
  Setup HTTP POST request
  httpConn.setRequestMethod (HttpsConnection.POST);

  httpConn.setRequestProperty ("Cookie", cookie);
  httpConn.setRequestProperty ("Accept_Language", "en-US");
  Content-Type is essential to pass parameters in a POST request
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
        
        
        
  httpConn.setRequestProperty ("name", usernamelogin);
  httpConn.setRequestProperty ("password", passwordlogin);
        
  secure https
  If SecurityInfo = httpConn.getSecurityInfo ();
  Certificate c = si.getServerCertificate ();
  Object String = c.getSubject ();

  This function retrieves this connection information
  getConnectionInformation (httpConn);

  OS = httpConn.openOutputStream ();

  OS. Write (params. GetBytes());

  / * ATTENTION: os.flush () is controversial. It can create unexpected behavior
  on some mobile devices. Try it for your mobile device * /.

  OS. Flush();

  Read the response from the server

  StringBuffer sb = new StringBuffer();
  is = httpConn.openDataInputStream ();
  int chr;
  While ((chr = is.read (())! = - 1).
  SB. Append ((Char) chr);

  Web server returns only
  System.out.println (usernamelogin + "is connected" + sb.toString ());

  } {Finally
  If (is! = null)
  is. Close();
  If (OS! = null)
  OS. Close();
  If (httpConn! = null)
  httpConn.close ();
  }

  }

  The fact of this aid.

  http://supportforums.BlackBerry.com/T5/Java-development/implement-basic-HTTP-authentication/Ta-p/445...