photos should be on the hard disk and not a network before catalog reader can find them.

My photos are on a network drive. I created a catalog on the hard drive of my computer of these photos. When I later open the catalog, Lightroom indicates that the file is not found. Photos should be on the hard disk and not a network before catalog reader can find them?

"Can't find" indicates Lightroom does not know the location of the photo because it has been moved, deleted or renamed outside of Lightroom.

To resolve this problem, follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Photos can be on a network drive.

Tags: Photoshop Lightroom

Similar Questions

  • Script to create the folder on the physical disk and not in the package

    Hello-

    Attached is a script that I have which will create a folder on the C:\ inside the bubble.  What I need, it's so he can create a folder on the physical disk and not inside the bubble.  Can someone tell me what I did wrong here?  I have a similar script which creates a folder on the D drive for the linked clones and it works fine.  Thanks in advance!

    Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.

    With the help of isolation have merged, the application can read/write file on the physical machine.

  • Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

    Hello

    Spilled water on the keyboard. Laptop has stopped working.
    Dried, but did not recognize the HDD start up and HDD does not Set - up.
    Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
    Is there an easy way to find and repair the defective HARD drive slot?

    Thanks for any help.

    PK

    Hello

    The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
    The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

    New motherboard would cost a small fortune he of not good about market 350Euros
    That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

    This is my personal opinion...

  • Replaced the motherboard and the HARD disk and now you try to transfer the old TB on the new, but cannot locate the files on the HARD old disk which is now the drive 'E '.

    My computer has stopped working completely and I was going to upgrade in any case, I advanced the work.
    Having replaced everything (motherboard, HARD drive) and everything worked as it should I turned my attention to my emails.
    I tried the Transfer Wizard Windows 7, no joy. Tried to find the profile files, no joy. Just can't find anything about it either remote seems to be linked to tuberculosis.
    HELP Please
    Thank you

    Profile of Thunderbird folders are hidden files, so first make hidden files visible.
    http://KB.mozillazine.org/Show_hidden_files_and_folders

    The location of the profile: http://kb.mozillazine.org/Profile_folder_-_Thunderbird
    Even if your files are now in drive E, not C.

    Info on moving to a new pc: http://kb.mozillazine.org/Move_to_a_new_PC

    If you have downloaded Thunderbird to new pc and run it for the first time, it will create a profile, but do not create the exisitng e-mail accounts. Then you copy the contents of the old drive hard e: drive - profile folder (not the folder real profile, that all the files in the profile folder) and paste them into the profile folder overwrite the default files.

  • Tecra 8000: Question on the HARD disk and the password

    Hi all
    A market recently my son bought an old laptop Toshiba T8000.

    Personally, I have absolutely no knowledge of the laptop myself as a desktop is everything I've ever used.
    However, I recharged the battery and the power, it asks for a password, even if what I believe to be the HD is missing (Vacant housing, left under the keyboard and behind the battery)

    Our local store offers him an incredible £121 a new HD

    HA wasted his pocket money on it or can he get a password and the HD at reasonable price to fit?

    Any help is greatly welcomed.

    BREZ.

    Hello

    Especially the password appears at the beginning of the startup procedure because the BIOS password has been set.
    Unfortunately, you cannot delete or remove the BIOS password if the old password of BIOS is not known to you. Either contact you the person who sells you the device and ask for the password or you will contact the service partner in your country for a deletion.

    I guess that's a Tecra 8000 with the number PAT80XE.
    This unit is a little older and so I think that hard drives are rare, a little so more expensive.
    By the way: the device supports an EIDE HARD disk interface

  • is deframenting the hard disk and the registry of the same thing?

    I want to know about defragmentation. I see one of my apps, there is a key to defragment the registry database. So, I see; Defragment the hard drive. While I see; disk defrafmenter. What is the difference between all of them?  Thank you to answer. Annacolleen

    Don't mess with your registry database.

    Not the same thing as your hard drive.  The registry is not * need * defragmentation in my opinion, your drive is probably is done via a calendar in all cases.

  • Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

    Original title: network very slow connection on the current installation of Windows?

    So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

    Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

    Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

    I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

    I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

    I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

    Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

    Thank you for your time.

    Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

    More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

    I think that the problem has passed away now, but if it arises again I will probably update this.

    Thanks for all the suggestions and your time in this issue.

  • Overheated computer, laptop CQ61, now "the hard disk does not exist '.

    I have reset the BIOS, I held down the power for 30 seconds while the battery is out. I don't know how to put back the hard drive. Is this my only option left? If yes I can't find a video on how, just remove videos. Anyway, can I get the hard drive to scrap and buy a new one, or are a kind of trendy connectors, fried or in ruins and I need to get a new laptop?

    Reinstalling the hard drive is made exactly as you did. The only option now is to try to replace the hard drive with a hard drive retail. It is the only way to determine if it is only the hard drive that has been damaged.

    If you need help to choose a replacement, post back with the complete model number or product as indicated on the Service tag on the bottom of the laptop. If you know what your hard drive capacity is just be sure to get one at least as large a capacity in order to use your recovery disks to reinstall Windows. It can be larger but not more small capacity, such as whether you have a 320 GB hard drive, now, you could use a 500 GB but not a 250 GB hard drive.

  • I've upgraded to Vista XP, the system crashed and now it says to install the disc so that it can be fixed. He doesn't like XP or Vista disc. How to get a copy of the Vista disk (and not an upgrade) my computer can run.

    my vista system crashed and now it asks me for my vista drive.  He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either.  where I kenza a copy of vista disc that works?

    To reinstall Vista:

    You can not legally do a clean install of Vista with a Vista Upgrade disk/license.

    Reinstall XP > then go to Vista.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Here's a startup repair disk, you can do:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Tecra 8000: monitor and the HARD disk does not work - does not start

    I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

    Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

    So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

    Thank you!

    Hello

    Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

  • Photos can work using just an external HARD disk and leave my only intern?

    Hello

    I am using v1.5 Photos. On my Macbook HARD internal disk fills up very quickly. Fortunately, I have a nice external 1 TB drive and I would like to:

    (1) move all my photos on the external drive and direct Photos program so search the folder on the external HARD drive to find all photos.

    (2) when I import pictures from my camera in the future, that the Mac them automatically in the folder of photos on the external HARD disk and not keep fill the space limited on my Mac small disk internal.

    Is this possible? I remember that I was able to do it with iTunes years when I used a Powermac with 4 x internal HDD of various sizes. iTunes has been able to see the music on each disk files and present them to me as a single list of iTunes.

    I'm not interested in using iCloud at all, I have everything on HARD drive and memory sticks and I am satisfied that, as it provides all the storage I need and I only use a computer for my work.

    Thanks a lot for your help.

    Yes, it is possible to keep the pictures library on an external drive. Make sure that the unit is running at the launch of photos from your Mac.

    See this discussion for detailed instructions of another user.

    How can I move Photos on external hard drive?

  • Reformat the hard disk of the P105-S6114

    I need to reformat the hard drive to my PC by Satellite. I inserted the disc 1, off, turned back on while pressing F12. I chose 'clear the hard disk', and this part of the process went well. It took about 1.5 hours. However, he never asked the other disk. All I get now when I turn it on is a black screen with the letter 'j' in the upper left.

    Can you tell me what to do now to re - install the default software/settings of recovery disks?

    Thank you!

    Jin

    If I understand correctly, you want to reinstall the OS with a recovery disk... In the Bios, set under the 1st boot device cd/dvdrom. Then, insert the diskette and reboot the laptop, according to the instructions on the screen that should start the installation process...
    > It took about 1.5 hours. However, he never asked the other disk. All I get now when I turn it on is a black screen with the letter 'j' in the upper left.

    To be honest, I do not know what that letter, j, means :) BU I know, the 1st recovery disk contains bones with driver and another disc with Toshiba Utilities. Perhaps, you should go to Bios and set hdd under the 1st boot device rather id cd/dvdrom

  • Cannot access the HARD disk drive HARD - Satellite P300 recovery

    Hi all

    I want to perform a Toshiba product recovery, using the partition on the HARD disk. I did it before and no problem.

    But when I press F8--> computer repair--> selection language--> then I have to select a user (Administrator / my name/guest) when I select the administrator, it says that my account has been disabled, when I select the user with my name (Kenneth) he continues to the menu where I can choose the different options for recovery. If I select the product Toshiba blah blah thingy a screen comes up saying it can't find 01 HARD drive. I did nothing with the partition containing Vista.

    My guess is that I need to log in as an administrator, which is impossible. My user account in Vista is a Director,

    Can someone please?

    I use a P300

    Best regards
    Kenneth

    You have made changes on the second partition where is placed folder HDDRecovery?

  • Capacity of the hard disk on the Qosmio G20-139

    I recently bought the notebook of Toshiba Qosmio g20-139, announced as having an 80 GB hard drive. Check the properties of the drive C: I think capacity is 69.8 GB. And in the properties of the device, it gives the Volume 71547 MB (I presume it's 71,547 GB).

    Does anyone can ease my mind explaining to me why I have not been 'ripped off '?

    Thanks in advance.

    Hello

    I'm not 100% sure but I think this part of the HARD disk is not partitioned and it comes preinstalled Qosmioplayer. This player doesn't need all the space, but if recording on this drive is available, I presume that this registered program is also recorded on this unpartitioned part.

  • Unable to see the number of files on the hard disk on Windows 7 computer after the hard drive crashed windows xp system

    Original title: unable to see many folders on separate conputer

    I was using windows xp with service pack 3 and windows 7 on a separate booklets. Suddenly the laptop with XP crashed... The hard drive was Ok - cased with a USB port, but now on the connection with the computer laptop windows7 I saw no many records there - pls help

    the system crashed in fact as I was reading the (visualization of the pictures - JPEG, bmp and also some books .pdf) & suddenly.  In the Xp laptop NVIDIA graphics card was there.  He lacked RECENT documents, I see

    Hello

    Try the methods provided below and check if the problem persists.

    Method 1:

    You can make the disk check to make sure that the hard disk is not damaged.

    See the link below for more information on disk error checking in Windows XP.

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Note:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Method 2:

    This issue could also be linked to the virus/malware on the hard drive that may have caused the crash of the system.

    Click on the link below to download and run a full scan of the system using the Microsoft Safety Scanner.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Maybe you are looking for