Formatting hard drive in NTFS instead of FAT32 on E1550

Similar Questions

• Installation of SP3 on a newly formatted HARD drive

  Hello

  I have a few questions about the installation of Windows XP Service Packs on newly formatted hard drives.

  Recently I have formatted a new HARD drive and installed Windows XP Home Edition. In order to be upgraded to Service Pack 1 to 3, it is recommended to connect to Windows Update and download and install it from there. I did this and was prompted to install Service Pack 2. During the last steps of the installation (I think that durng the procedure of 'start process'), I lost Internet connectivity and was impossible to reconnect (I use a USB dongle. I think that a virus infection is interfering with the connection). That's why I had to restart my computer for the installation could be completed, but it seemed to be successful that I was able to reboot without any problem. I assume that the installation had actually finished and it was just reset stage that was interrupted.

  Question: even if the installation of Service Pack 2 has not finished and my machine seems to be fine, reinstall Service Pack 2 in order to ensure that it is completely installed?

  Question: Why should I install SP2? If Service Pack 3 contains all fixes and features of all previous Service Packs and it is acceptable to upgrade to Service Pack 1 to 3 directly, why didn't Windows Update invite me to install Service Pack 3 instead?

  Question: I have found a manual download of Service Pack 3 (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5b33b5a8-5e76-401f-be08-1e1555d4f3d4&displaylang=en), but Microsoft strongly recommends that use you it only on machines in a network, and not on a single computer. Y at - it hurt to do?

  A question here, is that if Microsoft recommends that download the latest Service Packs of Windows Update online, so it seems not possible to fully guarantee your Windows installation before connecting the interest for the first time. All the while I'm software download and installation of Service Pack 2, malware, worms and viruses have been infecting my computer (Avast! blocked a malware exploit). So even if I managed to upgrade to Service Pack 3, my machine is already infected.

  Is there a recommended way to upgrade to Service Pack 3 before you connect to the Internet for the first time?

  Thank you

  Tristan

  See...

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tecra 8200 to format HARD drive - how to install windows?

  Hello

  I bought a Tecra 8200 used with a formatted hard drive, when I put the original cd of Windows 2000 in the cd player, nothing happens, how do I get Windows installed?

  When I turn on the power, he said something about the dos mode and then it displays the date and time and after that nothing happens.

  I hope someone can help me!

  Thank you!

  Hello

  It seems that the machine can boot from the cd rom t.
  Please check in the BIOS if the CD rom is recognized.
  Also if you have installed the original W2k OS of this device it of necessary to install driver in the following order:

  Driver Chipset
  Video driver
  Audio driver
  Common modules
  Energy-saving
  Toshiba Utilities
  Mobile extensions
  Internal Modem driver
  Infrared driver
  The mouse driver
  LAN driver
  Wireless LAN driver
  Toshiba Client Manager
  Toshiba network device switch
  Microsoft updates / QFE
  Extended IDE controller driver

  Good bye

• Format HARD drive in my cam error practice sony XR150E. Please let me know how to solve

  Hi all

  I use Sony handycam model XDR150E. I am not able to take any video, it always shows me HDD format error.

  Please let me know how to solve

  You can also use a data recovery software to help you.the disc you are trying to access either is not designed to be used with your OS, or it has been damaged and the data can no longer be read. Each diskette and hard disk must be formatted to prepare media for use with a particular file system.

  to resolve the error format hard drive , use a third-party software or ask for the help of an engineer.

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a

• error when installing vista on a formatted hard drive

  I try to install Vista Home premium on a formatted hard drive. After booting from the installation DVD, I get the following message.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \windows\system32\boot\winload.exe
  Status: 0x0c0000221
  Info: This file is maybe damaged. The header checksum does not match the sum of computer control.
  Any ideas?

  I try to install Vista Home premium on a formatted hard drive. After booting from the installation DVD, I get the following message.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \windows\system32\boot\winload.exe

  Status: 0x0c0000221

  Info: This file is maybe damaged. The header checksum does not match the sum of computer control.

  Any ideas?

  Use utility diagnostics by the hard drive manufacturer (usually available from the web page of the manufacturer of the hard drive) to perform a complete diagnosis and zeros (low-level format) on disk.

• The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  It should be on a sticker on the box, or on the packaging.

  The product key consisted of 25 digits, divided into 5 groups of 5 digits.

  See you soon...

  Mick Murphy - Microsoft partner

• How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

  How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• An installion 64-bit read than a 32-bit format hard drive does

  An installion 64-bit read than a 32-bit format hard drive does  I want to install win 7 64 bit on a new hard drive fast.  So I can transfer data files from the drive that was in my current system that is formatted for a 32-bit operation?

  If the disk has been formatted for a Windows system, it can be read by Windows 7. If the system was 32 or 64-bit is not serious.

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• Conversion of 232 GB external hard drive from NTFS to FAT32.

  I already tried a lot of free programs and other people say those free whenever I go to apply the changes, it says you need to purchase the program before any changes can be made. I tried cmd prompt, but he said that the volume was great to convert to FAT32. I tried to use windows help and they give me the steps but when I select the options it gives only me exFAT and NTFS. That's it for external use with my PS3 HD and he only read FAT32. If anyone can help me, I would appreciate it.

  To format a hard drive in FAT32 partition

  1. To open computer management, click Start , and then click Control Panel . Click system and Maintenance , click Administrative Tools and then double-click computer management .

  2. In the Navigation pane, the (Local) computer management, under storage, click Disk Management.

  3. Right click on the partition to be formatted, then click on format.

  4. In the Format dialog box, under file system, select FAT32, click OK, and then click OK again.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the upgrade to El Capitan I can't write on the external hard drive to NTFS format more

  I have an external hard drive formatted in NTFS, I used some Mavericks and could read and write on it without problem, after I installed El Capitan today I can't do more, not this external hard drive is read-only. The problem is that it is full of my data and I can't just format as journaled. What I can do and why it worked fine before?

  You need to upgrade or replace the software you used to write on NTFS volumes and should put a copy of your data to a second drive in case one you have fails for any reason unrelated.

  (140448)

• How can I convert RAW hard Drives - Partition to Partition hard drives to NTFS without formatting hard drives?

  Hard drive has already been partitioned into E: pilot and H:. However, recently, the format of the driver: suddenly changed from NTFS to RAW. There are some important data in this driver. I don't want to format this driver, unless the data can be retrieved.

  I would like to ask for your help to find the solution for this problem.
  Thank you

  RAW generally means that the drive is/has failed.

  Data cannot be considered as important if you have no backups

  You can try this utility free http://www.piriform.com/recuva

• format hard drive for windows and larger files, TV supports

  Hello

  pls suggest me with the solution to the following problem.

  I need to know what format of hard drive works with mac, windows, & TV too, even for large files and quality bluray movies

  FAT32 only supports files up to a maximum size of 4 GB, which would be certainly much too small for Blu - Ray quality media.

  exFAT supports files of unlimited size effectively, Mac and Windows can read and write to exFAT to format external drives but neither can boot from such a unit. If a TV or other system supports exFAT drives, you need to check yourself formatted.

  NTFS supports files of unlimited size indeed, Mac can only read NTFS, it cannot format or write to NTFS, unless you get an add-on. Of course Windows supports NTFS. Again, you will need to check if your TV etc supports NTFS. If you want to add full support for NTFS to a Mac, I recommend this - https://www.paragon-software.com/home/ntfs-mac/

  HFS + is the current format of Apple and new supports files of unlimited size effectively. Mac can of course read, write and format disks. Does not support the Windows as a standard HFS +, but still, you can buy an add-on for Windows Add this feature. It is extremely unlikely that a TV would support HFS +. If you want to add full support for HFS + for Windows, take a look at this - http://www.mediafour.com/software/macdrive/

  There are also other formats of disc for example ZFS and BTRFS, Ext3, Ext4 and soon SATF, but in this case, they are not relevant.

  Note: as indicated above, in many cases, I said 'actually unlimited', it is of course a limit, but one so great that he will strike you not for individual files, including Blu - Ray or even files UltraHD (4 k).

• Formating Hard Drive to EXT3 in Windows 7

  Hello
  I have a Popcorn Hour C-200 I want to install an internal HARD drive to can I format this drive on my home network to my Windows 7 PC and if so can I format the disk in EXT3 format, once again on the network? If this is not the case, what is the easiest method to format the disk in EXT3.

  Thnaks, Ian

  Windows does support FAT, FAT32, NTFS and exFAT for partitions that can do/read/write in. In order to make an ext3 partition, you need to use Linux. I use GParted (gparted.sourceforge.net), which is a special Linux Live CD dedicated to the modification of partitions.   My "> favorite sons |" Computer tips contact | Programs 'Gadget '.