former driver pixelink cannot be used in labview2009

Similar Questions

• Driver webcam cannot install using Win 7 64 bit on Satellite Pro T110 - 11 L

  Hello

  I'm trying to use the webcam came with the laptop, it's a Satellite Pro T110 - 11L.

  It is currently running Windows 7 64 bit and I tried to install the web camera for Windows 7 64-bit drivers and even the XP version which Toshiba site has on the page drivers.

  The two pilots of the web unit fail during installation that gives "Application DMICheck stopped working" error.

  Can you help me?

  Thank you
  Hugo Figueira

  Hello Hugo

  According to the specifications of the laptop your model T was delivered with preinstalled Win7 64 bit professional. Original recovery image contains a preinstalled software webcam and it is configured to start automatically, so I would like to know since when you noticed this problem.

  I can't imagine that this problem persists since the first day. Am I right about that?

  Are you still using original preinstalled OS?
  By the way: this is the driver for the webcam just for your laptop model.

• Why this flash drive cannot be used for loan boost in windows 7?

  I have a flash drive 8 GB Kingston which is useless, but functional. I decided to use it to boost lending. So, when I go to ready boost in windows 7, it says this drive cannot be used as ready boost I've tried several times but the same answer. When I try to use it as ready boost preview of consumer windows it says OK. I have set up as ready boost. I also format and then try but same answer in windows 7. How can I use this disk as ready boost in windows 7?

  Sometimes the reader is not fast enough for Readyboost. BTW: How much memory you have in your PC? You can even no need for ReadyBoost.

  But, to force Windows to use ReadyBoost (even with a slow flash drive): http://www.mstechpages.com/2010/10/12/force-readyboost-on-a-usb-device/

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• Satellite A200: Cannot properly use external USB devices

  I encountered a problem with my Toshiba laptop and I can't fix it, and I'm in need your help please...
  The problem is that when I connect a USB portable device (an external hard drive, USB, iPod, Flash memory... etc) with more than 8 GB of memory...
  It is not properly installed in the Device Manager and appears under "USB bus controllers.

  But it does not say that it is an unknown device. It normally appears with his name, but he is not properly installed (it does not say that either) where it is supposed to be a camera under "imaging devices" in a specific category (hard drive under "drives"), and so on

  And I can't use the unit because the HARD disk does not appear in 'My computer' and my iPod cannot be used

  I would like to inform you that this problem is with all USB devices with more than 8 GB of memory.
  Not a single device. I tried a lot of features to ensure that it is not a problem with the unit.

  So this is a problem with my laptop and I installed Windows several times but no progress.
  Thanks for your help in advance...

  Is it XP or Vista?

  If its XP, make sure you have at least Service Pack 2.
  This hotfix can help XP see large capacity media:
  http://support.Microsoft.com/kb/934428
  but that doesn't really affect USB external HDD.

• This disk cannot be used El Capition

  Mac users,

  I have deleted the partition of "Mac Hardrive" accentually when installing a corporate image with the player on a new machine retina iMac 4 GHz i7 in recovery mode. I tried to reinstall on the internet after erasing a disc, however, I get the message error "this disc cannot be used to start your computer." When you are prompted to select a drive to install also.

  This machine is less than two months.

  I'm dead in the water, or Apple Store bound?

  Thanks for any help

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• Ventrilo in world of warcraft runnig vista__Unable to enable DirectSound for some device.__DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"

  Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?

  I have finnally got the answer that it must be run as administater. For the Horde!

• "The backup file contains unrecognized data and cannot be used.

  Original title: - what are MS provides a BKF recovery tool? "The backup file contains unrecognized data and cannot be used.

  I'm trying to restore BKF files created by NTBackup.exe after the crash of a hard drive running XP Pro. The new hard drive is the same brand (WD) goes into the same computer Dell Inspiron and the same OS. No catalog file is available and trying to recreate the NTBackup recovery gives an error message.  No catalog cannot be created for many, but not all of my backup BKF files.

  I do not consider the solution of SysTools $89 for a large part of the answer. This problem is not uncommon and I hope MS has or can tell me a free tool to allow me to restore from any of my BKF.

  Thank you.

  You can take a look here: http://www.fpns.net/willy/msbackup.htm#NTBKUP

  I have no information other than what is on the web page.

• Movie Maker error: cannot be used because the audio hardware is not found

  I am trying to use Movie Maker on my lap top, but get the following error: Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

  I don't know what is missing, please help

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to update the audio driver installed on the computer. You can visit the link below for the procedure: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• Why the driver file cannot be "x 86"?

  There is a strange problem for a driver: the driver file cannot be "x 86" under windows XP.

  I have a driver, the driver started the "i386" folder files and I can install the driver successfully.
  can I change the name of folder name to "i386" to "x 86". When I try to install the drver, a message box pop up to tell me "xxxx necessary file", installation failure
  and I can confirm also that any driver so its files to 'x 86' folder, it will be impossible to install. If I changed his name to another name of folder except "x 86", the driver will be installed successfully.
  Why? The folder name is "x 86" is a reserved name for the driver under windows xp? any document referred to this problem?

  Hello chyao,.

  Thank you for visiting the Microsoft answers community.

  If I understand what you're asking, you try to rename the folder i386 for x 86?

  i386 is a folder used by windows (one copy installation files) and cannot be changed to raise the questions you had. The file has not to be present for Windows runs correctly, but before maintenance and repair, it is used. In your case Windows was looking for a driver in the i386 folder.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.

  Original title: what is NTFS?
  When you try to do a full up, I get the error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.  My OS is Windows Vista Ultimate Edition.

  What is NTFS?

  What type of disc to I use to make a backup?

  Hi Heather_604,

  There are two ways you can do: you can convert the external hard drive to NTFS, or you can format the external hard drive to NTFS.

  Personally, I suggest that you format the external hard drive, but this will remove all data from the drive. Temporarily, you can copy what is on the hard drive on your C: drive if you have enough free space (or DVD) - once the external hard drive is formatted NTFS, you can copy everything back.

  Formatting disks and drives
   http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Examine everything under view all. also check How can I add a new HDD? If Vista not recognize the external drive in see computer management - disk, the link create and format a hard disk partition management:

  Create and format a hard disk partition
   http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  If you want to convert the external hard drive to NTFS, see the link in my original answer and:

  Convert a FAT32 to NTFS disk in Windows Vista
   http://News.Softpedia.com/news/convert-a-FAT32-disk-to-NTFS-in-Windows-Vista-51792.shtml

  Converting an external hard drive to NTFS
  (see r. v. White second after correction of typo in his post punch)
   http://Forum.Soft32.com/Windows/convert-external-hard-drive-NTFS-ftopict341077.html

  If you convert the drive to NTFS, I always recommend that you copy the existing data, as I described for the formatting of the disk, just in case...

  Kind regards

• You must format the drive until you can use it!

  Hello.. can someone help me please...

  I have Windows vista... I have an extra external HARD drive... Every time there is an upgrade of vista I can't access my external hard drive, I click Open, he said: "you need to format the disk in E: drive before you can use it, you want to format?"

  Ok.. It's something to do with permissions I have solved this a coupke times before fixing it then setting a restore point, unfortunately my restore point will not do after an another upgrade of vista/update...

  How to reset the permissions so that I can access all my music, images, and documents stored on my external hard drive and... What can I do to stop future updates change my settings and stop my access to my external hard drive?

  Thanks in advance, ian.

  Gringy,
  Here is an article with detailed steps to take to solve the problem of permissions permanently.  http://support.Microsoft.com/kb/949608 this involves advanced enough procedures so if this isn't something you feel comfortable with that you get assistance to do this process.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 reactivation error "the product key you entered cannot be used to activate Windows on this computer."

  Original title: the reactivation of Windows 7.

  I had uninstalled my Windows 7, or more to the point, to the format that cause hard drive then I bought a copy of Windows 7 Professional 64-bit and tried to install it on my new hard drive 2 TB, but it is around. But now four to five months and this disc hard seems to have failed, the installation going crazy and ends by not completely. So now I use 8 64-bit Windows, on the hard drive that's used to have my old Windows 7 32-bit, and I try to install Windows 7 32 bit on my VMware Player as a virtual PC, but for some reason any bloody, the thing won't turn on. I got my license and my old Tower, the old tower and the old series of hardware Linux now without all the graphics cards, but it is going to be really just a supermodel, a server for a game and accommodation of the tracks that can be downloaded in the game, all she needs a new motherboard cheap as the motherboard, that he completely fried. But the issue I'm having is with virtual PC, however, I use the license that came when I bought it and is not wanting to turn on, it keeps Gush a BS error, my Windows XP is activated, but my Windows 7 does not. He always tells me that "the product key you entered cannot be used to activate Windows on this computer."

  How and why? I'm in my series that accompanies it, and that's exactly as it appears on the label. What I am doing wrong?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If your license of Windows 7 is an upgrade:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------