Former synchronization problems Nano 5th gen

Similar Questions

• IPod Nano 7th gen... podcasts don't sync to itunes. synchronization for podcast is on... im confused. THX!

  IPod Nano 7th gen... podcasts don't sync to itunes. synchronization for podcast is on... im confused. THX!

  When you say "synchronization for podcast is on", have you done the following...?  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click Podcasts.  Right, Podcasts from iPod settings screen.  If the checkbox for synchronize Podcasts is not checked, check it.  Activates the automatic synchronization of podcasts.  Set up this form as you wish, to tell how to synchronize episodes of the podcast to iTunes and click apply.

  If sync Podcasts has been already verified, describe how you have the rest of the screen of the iPod Podcasts settings put in place (or include a screenshot of it).

• iPod connection and synchronization problems classic160GB

  I have a well taken in charge iPod classic 160GB. Worked perfectly until...

  Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

  Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

  Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

  I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

  I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

  LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

  Please, if you know a solution, I am very willing to try that.

  Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

  https://www.iFlash.xyz/

  I see that this synchronization problem is quite common with this unit-holders...

  It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

• How to sync iTunes movies on an iPod Nano 7th Gen?

  Hi, I'm Sam.

  I have an iPod Nano 7th Gen (software: version 1.1.1)

  I have iTunes (software: worm 12.3.2) on a HP Pavilion 15 laptop with Windows 10.

  I can sync my iTunes library of songs (imported CDs and downloaded iTunes) on my iPod.

  BUT

  I can't synchronize iTunes downloaded movies on my iPod.

  To try to get movies to sync my iPod I have:

  -In the main movie section of my iTunes (not in iPod movies or sections of the iTunes Store), I clicked on a movie and the quality of the video: on the downloaded movies, there are only two options (by default (HD 1080 p) and high definition (720 p)) while others bought but not downloaded movies are the first two options as well as two more [Standard (SD) and high definition (1080 p)].

  When I try to sync a movie downloaded to my iPod with one of the first two options of quality Video (by default (HD 1080 p) and high definition (720 p)) I get this message:

  'FILM' was not copied because video high quality SD is not compatible with the iPod "MY IPOD".

  -In preferences, store preferences. I checked the box that says 'download high-quality SD video '. Before deleting all of my library and the re - movies download.

  When you try to synchronize any re-downloaded movies, with video quality settings, I get the same message as shown above.

  -The only other thing I tried (which others have suggested) is to select the movie, and then click file - create a new Version - create iPod or iPhone version. Select the movie by clicking on it, then the steps or by clicking it and then pressing Alt and then following the steps.

  However when I tried to do I can not click "create iPod or iPhone version" because it is grayed out and cannot be clicked.

  If anyone has other ideas/improvements on ideas on how to get movies from iTunes on an iPod nano GEN 7 please let me know.

  If this can help all the movies I've tried are Star Wars Revenge of the Sith, Forrest Gump and Top Gun.

  You cannot use the "Create iPod or iPhone version" command if the movie (or TV show or music video) is a purchase on iTunes Store, because the video has DRM (copy protection), as required by the content producers.  That is why the command is grayed out.

  Try going to the screen purchased in iTunes (click bought along the right side of the main screen of iTunes Store).  On the screen that is purchased for films, in the lower right corner of the window, there is a check box for Download HD when available.  Uncheck the box and find movies.  If there is a cloud for movies to download, download it.  When only the HD version is currently stored on your computer, you should get the SD version.

  iTunes might as well of both HD and SD of a movie bought in his library at the same time.  They are not presented separately, but he will say 'HD - SD"next to the name of the movie in the library list, if it has both.  Most of the SD movies should load and play on an iPod nano.

• 12.3.2.35 on Windows 7 upgrade broke my 5th gen iPod and iTunes all the

  Upgrade to 12.3.2.35 on Windows 7. It worked for about 10 minutes before everything started continuous crashing and apparently broke my iPod classic 5th gen. Now, no version of iTunes will work on my computer and my iPod think there nothing about this (while the investigation of my computer still shows 30 GB in use), and will not even try to sync. Help please!

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• My Nano 4th gen battery is dead, is this the end?

  My battery Nano 4th Gen does not load, is this the end?

  This repair guide shows how to replace the battery

  https://www.iFixit.com/Guide/iPod+nano+4th+generation+battery+replacement/1161

  For an iPod nano, the challenge is to weld.  There may be electronics independent garages in your area familiar with Apple.  Apple repair service support for older products is described in this document

  Vintage and obsolete products - Apple Support

  The room itself is available online, from the usual sources such as eBay and Amazon.

• Airport Extreme 5th Gen link speeds

  Does anyone know how to set the connection on the Airport Extreme router speeds (5th Gen don't box not turn)?

  I noticed that I get only a speed of 100 Mbps LAN link when it is connected via the LAN port.  I'm not concerned with the WAN port, as I already have superior to my bandwidth plan.  It is only to the local network only, because I intend to deploy a server and want faster transfer speeds in my house.

  I looked at the specs and the 5th generation has a 1 Gbps WAN + 3 Gbps LAN ports and the cable I use is estimated at 10 Gbps.

  Out of all my Macs including Wireless AC capacity up to 450 Mbps speeds, I have a Windows computer that is specifically for the game and uses a built in 10/100/1000 Intel NETWORK card.  Last night I noticed that my connection speed has been negotiated by auto to 100 Mbps, so I changed it to 1000 Mbps, it did not and refused to talk to the router.

  I have an Xbox One using a second LAN port and I wonder if the AirPort Extreme affects all ports LAN of the lowest common denominator.

  My WAN connection is connected to a modem DLink DCM301 instead of the ARRIS modem which does not work well with Macs.

  I have a 35' cable going to the Xbox and a 50' cable going to the PC in case you want to know.

  I wonder if the AirPort Extreme sets all LAN ports the lowest common denominator.

  No, it isn't.

  IF you have access to an older version 5.x of AirPort Utility and

  IF you have airport configured as a router... not a bridge

  THEN... You can adjust the parameters of the WAN port and speeds.  No controls for the LAN ports.

  

• IPod 5th gen Date is December 31, 1969, time ignores timezone

  I was on my Ipod Touch 5th Gen iOS 9.2.1 when he died. I don't have to plug it back in a few hours. When I had charged and turned on it said it was on 31 December 1969. The weather was too broad. I played a bit with the date and time using other instructions, but have had no luck. He said presently there January 4, 1970. I also get the notification saying "cannot verify server identity: 'calender.google.com' identity cannot be verified my Gmail notnef (email I have attached to my email application but not attached to my Apple account).» Review the certificate details to continue"I went into the details of the error and have already told him to trust. But that doesn't seem to change anything. I'm now going to turn my Ipod then turn it back again but I doubt, it's going to do anything. Help?

  Thank you!

  Go to settings > general > language, regions and make this calendar is set to Gregorian

• IPod Nano 7th Gen: a track and then stop?

  I searched a lot about this issue and the majority of responses either query should do, or give answers about the Shuffle or repeat.

  My iPod Nano 5th generation used to do this - the 7th generation does not work.

  Specifically, I want to play a Podcast, and then have it stop at the end.

  I don't want to repeat the same podcast, I want him to stop.

  I've seen suggestions on the creation of individual playlists for each song or podcast - much too tedious.

  Any thoughts?

  Ta

  To be in a container, such as a container of songs, albums, playlists, you have to consider everything on your iPod.  You can have it play something only once, but it will move to the next item in the container to play by default once it's done.  That's why people suggested using a playlist with only one point in it.

  Now I don't know if you tried to make a playlist on the fly or not, but the iPod Nano is able to do.  Just go to your playlists on your Nano section and scroll to the top of the screen.  It will allow you to create a new playlist ("add") or edit an existing ("").  Just select Add, then select your content.  You can then enter this playlist and clear the list and reuse for any other content that you want to listen only once, so it is not that much more involved than the selection of something to play on the fly, now, only he stops once done, unlike other processes.

• Does space empty between the video clips a synchronization problem in first?

  In the past, when I wanted a second or two of black space between video clips, I just leave the empty space, which fell to black on each side of the gap.

  Can only cause audio/video sync issues? Can I actually save some black frames and fill these gaps?

  I just loaded a video on Youtube, and it gives me an error message I could have synchronization problems.

  Thank you

  Leonardo

  From my experience, empty spaces will not cause any problem whatsoever.  Done it for more than a decade in every version of Premiere Pro.

• Pinch and Zoom - synchronization problem

  Hello

  Since v25, iPad Apps have a pinch and Zoom synchronization problem. If hitting swipe to a page, you cannot directly Pinch & zoom, using the two finger gestures. Firstly, it must wait 1 to 2 seconds (whats darn long) until you can zoom. Even if the PDF page is fully loaded (already sharp/readable).

  On some pages that do not have something different than the other pages, you must first zoom out, before zooming in works.

  Very strange problem. Someone at alse noticed the same thing?

  I'm using the latest tools of InDesign CS5.5 v25.

  Kind regards

  Yves

  We have seen problems with pinch and zoom on v25. It is not so much a timing problem that the gesture is very sensitive to how far your fingers are when you start pinching. We turn to her with a fix in v26.

  Neil

• iPod Touch 5th Gen disconnects during synchronization

  I can only assume that it is a question of OS.

  The problem is that every time that I try to sync my iPod Touch a few seconds in the progression of synchronization

  all my logout of devices USB (keyboard, mouse, iPod, etc.), then immediately reconnects, it happens only when I put my iPod Touch to sync.

  Things I've tried:

  -Reinstalled iTunes

  -Reset iPod

  -Restore the iPod

  -WiFi Sync (same result)

  -Restart the PC

  -Moved to copy music from different HARD drives and SSD

  -Used 3rd party software

  -Synced album by album instead of all at the time (longer works for a while, the synchronization of time more the chance of what happens)

  One thing that I noticed but have no idea what to do with that when it happens, in case the Viewer, I get a specific error.

  Error_usbehci_4 - a time-out occurred while waiting for the host controller EHCI interrupt on answer Async ahead Bell.

  

  -Try a different USB cable

  -Inspect the dock connector of the iPod for contacts bent or missing, foreign material, contacts corroded, plastic cracked or damaged.

  -Try on another computer and see if get disconnect it.

• Synchronization problem on update form? [White]

  Hi all

  We had a problem with our own Board and tried on youtube sample whiteboard AFCS which also seem to have.

  The recipe:

  Get two users A and B on the map

  • Draw a square with A
  • Resizing of the user at the height of the place, but not to do the "mouse up action" which is published in the CAA.
  • User B resize the width of the square, but not to the "mouse up action" which is published in the CAA.
  • In the same time A and B, release the button of the mouse to the top.

  What you'll get is two different States of the square shape, a vertical of B rectangle and horizontal rectangle on A.

  There is not seeing the same thing and it is a problem (huh?)

  Which, in my view, is happening behind the scene is the following:

  AFCS receives an update of A on the form #n id,

  He published to user A and B, A do not know because it is an aciton coming from itself, and B updates its status with a message.

  On the other side that b publishes its State to the CAA and is updated.

  (don't know how clear is that)

  What we will try to solve this problem, is to update the form even when the published message was ourselves.

  What do you think?

  Thank you!

  Greg

  Hi Greg,.

  Yes, using a timer should solve deal you with a large number of messages sent in quick succession. That's what I wanted to try something similar to updateDisplayList.

  If you do not use the timer, so let's say you have the second strike but onItemReceive you have the first strike when you move the keyboard in quick succession. Which will look like little weird because your interface view local user is already spent for 2nd strike and update you again to the first strikes. Thus, timer can solve this problem and I don't know if it's the perfect way.

  Thank you

  Hironmay Basu

• iPod 5th gen itunes problem

  My ipod Touch 5th generation will not connect to iTunes store? Why?

  Have you tried:

  If you cannot connect to the iTunes Store - Apple Support

• playlists only to usb_windows7/itunes12.3.2/5th gen nano

  How can I move playlists ONLY on a USB?  Windows7/12.3.2 itunes/5thgen nano

  You can export a selection in a text file and store it on a USB key, but the playlist does not work anywhere else without the media that it references. Or you can drag the content in a playlist in a USB key to copy the files there. That is what you want to achieve?

  TT2