Formulas does not work in drive

Similar Questions

• Satellite A300-1BZ - microphone does not work - need driver

  My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

  Hello

  The internal MIC is part of the webcam.
  Next to the sound driver, you will need to install the Chicony webcam software.

  You could test the microphone using the webcam software there is an option that allows you to record the audio stream

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• Epson v500 Scanner does not work after driver update!

  I recently bought a V500 photo and scanned my first 35mm using Epson Scan v3.7.4 negatives. The colors seemed off so I download and installed the latest v3.7.7 of support to Epson.ca hoping that it might help.

  Following the upgrade of the driver, the scanner has stopped working! Loads of Epson Scan, but after 5-10 seconds, I get the message: "no response from the scanner. Make sure the scanner is turned on and connected properly. If you use the transparency feature, remove the reflective document mat. »

  Then I restored the latest install w / restoring Windows but still could not get the job to scan. I drove back to the pre - Epson scan install date and tried to reinstall the earlier version but still no luck to get scanner work.

  I then followed the steps of uninstall on the Epson.ca support site removed all the drivers and the software with the scanner turned off and unplugged. Then I reinstalled the old version of Epson Scan of the CD because he had worked at the start. I reconnected it the scanner it plug it in and turn it on. But it still does not work! Ditto for uninstall and reinstall with the latest drivers.

  Notebook P7350 using Windows 7 32 bit SP1. Scanner is connected directly on the laptop, not through a hub. I tried all 3 ports USB in the hope one would work, but no luck. All connections between the pc and the scanner seem robust.

  Any suggestions to get scanner work?

  Thanks for the reply of adeline. In the meantime, Epson come back to me when I contacted them again but only after I have disabled cookie blockers in Firefox when visiting their support site. The first time I've done this, and the support form has not sent correctly.

  It turns out that the scanner must be completely turned off and unplugged then reconnected after that driver installed. I discovered one of the records was not too tight that it should have been :-0 if I was sure I had checked it earlier.

  Thanks again.

• LC digital signature does not work in drive

  I added a signature field in a form of LC with expectations that it would work in Reader.

  I can see the field, but it does not work in the drive. I open the form in Acrobat and the works of signature field.

  Any ideas on fixing this?

  You have the reader extend PDF. Is using Adobe LiveCycle Server(Reader Extension) or Acrobat (file-> save as-> Reader Extended PDF - > activate additional features...) Save under)

  -Yolande.

• the plugin does not work in drive

  I compiled the project successfully, and I got the DdeServer.api file.

  He now works in the observer, but it does not work in the drive.  Why?

  What are the differences between support Viewer and reader support?

  OK - our samples in the SDK are for Acrobat NOT to the reader.  No attempt

  has made to build them for the reader.  If an API is not available for the reader,

  You can not use it there.

  You can do what you want - but I always recommend to people that they

  try to acquire the license FIRST because if Adobe does not give you the

  License (this is NOT a given that we do!) then all of your work has been

  wasted.  Better to know in advance if you will approve.

  No, a plugin with IKLA will be completely ignored by player - it won't be the same

  See or try to load it.

• Created in Adobe Acrobat Java script does not work in drive

  Hello

  This is my first post, so I hope that I have chosen the correct path for her

  Let's get to the point:

  I created a java script in Adobe Acrobat according to your tutorial page:

  search.matchCase = false;

  search.wordMatching = "BooleanQuery."

  Search.Bookmarks = false;

  Search.Query (Mytxt ","Folder",".. /My directory');

  I found work as a call a relative link, because, after copying my file in another folder it would continue to operate. But when I open the same file in Adobe Reader I got a message on the Console:

  The built-in functions of EScript Acrobat Version 10.0

  Acrobat SOAP 10.0

  GeneralError: Operation failed.

  Undefined Search.Query:4:Link: mouse upwards

  Folder does not exist

  As I mentioned earlier the same file returns the results of the search.query in this folder in Acrobat. Any ideas? Suggestions? What could be the problem?

  And if you want only "under", you can use something like this:

  var fileNameParts = this.path.split("/"); "

  var ParentFolder = fileNameParts [fileNameParts.length - 2];

• P0R94EA #ABU: brightness and HDMI does not work after driver update

  Hello

  I get a notification to update my drivers for HP Support Assistant that I took and I installed all the drivers involved and since that I can't not change the brightness of my screen or use the HDMI for display on my TV. I don't have the updates has been "Intel high definition (HD) Graphics Driver.

  Can someone help me with this please have tried different things from other sites, but nothing has worked.

  Hello

  Is there an improvement if you install the earlier version at the following link?

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72107.exe

  Kind regards

  DP - K

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• County formula does not work

  Hi all

  I want to do the following expression in OBIEE:

  SELECT COUNT (COL1) FROM TABLE1 WHERE COL2 = 'ABC' / SELECT COUNT (COL1) FROM TABLE1

  Is - it possible to analysis where I need to get a value of division of two different County expression; a filter and one without filter.

  I use OBIEE 11.1.1.7

  Help, please. Its urgency.

  Thank you

  Clercq Mukherjee
  

  Do not raise any question about possible or impossible! do it, that's all.

  using analysis

  Pull col1 and then use below exp.

  (sum (case when COL2 = 'ABC' then end)) count (col1) other 0 1

  ~ http://cool-bi.com

• formula does not work because some time divide by 0

  Hello;
  I create a form and in the text field, I put this forumla
  (: BLK1.) A +: BLK1. (B) /(:BLK1.) Z * 100);
  
  but the topic of Z is empty or no i get the error message because it is predefined by zero.
  
  can you help me

  Hello

  You can try,

  (1) change the formula for

  (NVL(:BLK1.A, 0) + NVL(:BLK1.B, 0)) / (NVL(:BLK1.Z, 1) * 100);
  

  (2) create a function in the form and call this function in the property palette and in writing form of function.

  IF NVL(:BLK1.Z, 0) = 0 THEN
         RETURN 0;
    ELSE
         RETURN (NVL(:BLK1.A, 0) + NVL(:BLK1.B, 0)) / (NVL(:BLK1.Z, 0) * 100);
    END IF;
  

  I hope this helps.

  Kind regards

  Manu.

• Hybrid Analog/DVB-T card does not work - Qosmio F50

  Hybrid Analog/DVB-T card does not (Windows Vista Home Premium).

  Channel zero came after scanning with Media Center. Sent to the hardware engineers.
  Tha card has been tested in a "fresh load of Windows" and worked well.

  It was suggested to clean and reload Windows.
  I made and tested with and without having to download Service Pack 1. Still does not work. Driver has also been updated (2.3.3.21).

  Any suggestions?

  Thank you

  Hello

  First of all, you should test the portable DVB - T with Toshiba s card preinstalled Vista.
  Everything has been set up and should work fine

  I think that it s not Analog/DVB-T Hybrid card problem.

  Maybe the DVB - T signal is too weak and therefore you do not find the TV channels using this card.

  In my country and the region, the DVB - T signal is really weak and I need a DVB - T antenna to receive the signal and the channels!

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.

• Satellite A200 - 19L: no sound after hibernation & CD/DVD drive does not work

  First of all, my laptop computer became very slow loading vista after formula 1 week to buy it.

  Second, sometimes when I put the mode 'sleep' a revival of the laptop, there is no sound and a red circle appears over the speaker icon in the bar of tasks, and when I go into control panel > Sound, he tells me that no. his drive was installed and when restarting the laptop the problem resolved?

  Thirdly, after the formula of the week 3 buy the computer also dvd - cd player has the same problem, like the sound and when you open my computer that NO cd\dvd drive icon and when I put a cd or dvd, it does not work or run and it happens all the time, even if the laptop restarts.

  Since then im able to watch movies or work.

  I'm lost and I don't know what to do!
  (Sorry for my bad English, but I hope you understand the problems)

  Hey Osama

  I think I can help you. The questions that appear on your laptop are not serious and the only one associated with software or registry.

  Regarding your noise problem:
  Please check this Microsoft document
  http://support.Microsoft.com/kb/929685/en-us
  or
  http://support.Microsoft.com/kb/937077/

  the MS update must be downloaded and installed ;)

  Regarding the missing CD/DVD drive;
  I think you should try to remove the drive from Device Manager and reboot the laptop. Then the operating system should recognize the STRANGE again.
  Secondly you should access the registry editor and should remove the upper filter and bring back the key filter
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Recommend checking out:
  http://support.Microsoft.com/kb/270008/en-us

  best regards and I hope that I can help you

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.