found 907 invalid cod file

Similar Questions

• Get error "Failed to Downlaod 907 invalid COD file not found"

  Hello

  So I created an app for Blackberry and it works 100% in the Simulator... But when I try to copy the application on my physical device and install it using the .jad file, I get the error 'failure of Downlaod 907 invalid COD file not found' every time that... It won't install. But when I use the Blackberry "Rock FIle Manager" app and use its functionality of COD Installer application installs fine... Also, when I use the 'Create-A-JAD' program to create a .jad file from the file and then .cod file replace the build with the Create-A-JAD a .jad file and then install the app, it works...

  I used the software 6 SDK and my physical device is a Blackberry 9300 which is runnin OS6. My application is signed... Here is a link to an image that demonstrates that the app is signed... http://www.freeimagehosting.NET/ytoge

  What could be the problem so that it does not install it?

  Thank you very much!

  you could try to unpack cod (its actually a zip file that contains the subsidiary COD), maybe it helps.

• Http 404 file-907 Invalid COD error

  When I try to download the app OTA thr I am error gettting (error Http 404 invalid cod file-907), which only happens in the device of 4.6, but when I'm able to download thr OTA in 5.0 device and run it successfully.

  For compatibility, my App extends the JAR file, that has been compiled with OS 4.6 and it was Preverified and use in the application. The application opens on the version 5.0 device,

  If I test it in the 4.6 Simulator 9000 unit, it loads successfully, but in the 8520 device I get above described error, how can I find out the error?

  Concerning

  Rakesh Shankar.P

  Hi Mark,

  I found the nature of the error, there is no generation question not related, there is someproblem to the server, in which I write, so it's been the question, if I can access the build even after some time, it has installed successfully.

  Thank you

  Rakesh Shankar.P

• Installation of the OTA for Storm: "907 invalid COD. "Error HTTP 404: not found.

  Installation of Storm OTA:

  -----------------------------------------------------------------------------------------------

  COD

  -----------------------------------------------------------------------------------------------

  My request 'abc' has a big .cod file and > 64 KB. I extracted and produced 6 .cod files.

  ABC. COD

  ABC - 1.cod

  ABC - 2.cod

  ABC - 3.cod

  ABC - 4.cod

  ABC - 5.cod > 64 K

  ABC - 5.cod is always larger than 64 KB

  -----------------------------------------------------------------------------------------------

  JAD

  -----------------------------------------------------------------------------------------------

  However abc.jad file has files of 7 cod enteries

  RIM-COD-URL-6: abc - 6.cod

  RIM-COD-URL-5: abc - 5.cod

  RIM-COD-URL-4: abc - 4.cod

  RIM-COD-URL-3: abc - 3.cod

  RIM-COD-URL-2: abc - 2.cod

  RIM-COD-URL-1: abc - 1.cod

  RIM-COD-URL: abc.cod

  When you download it gives me "907 invalid COD. "Error HTTP 404: not found" error.

  -----------------------------------------------------------------------------------------------

  I also tried deleting after 3 enteries of the .jad file.

  RIM-COD-URL-6:

  RIM-COD-SHA1-6:

  RIM-COD-size-6:

  But it still gives the same error.

  -----------------------------------------------------------------------------------------------

  Emergency assistance is required.

  Alhumdulillah

  Problem is solved

  Mistake I made was that I have not put the .zip file on the Web server that was originally the .cod > 64K file.

• 907 invalid COD

  I am trying to install an application on the blacberry 8900 but I end up getting "907 invalid COD". I scoured the causes common to http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/Support... but none of them don't apply to me

  1. built using Netbeans which automatically updates all the attributes. Signed using a verisign code signing certificate.

  2A got the COD file that was signed using the Blackberry signature tool button.

  3 final file size of cod is 686 KB. There are 10 other files inside this parent COD cod.

  4 added the parent COD (686 KB) to the web server

  5. download the file by pointing Blackberry 8900 to the jad (I double/triple/quadraple verified I downloaded good jad)

  6. the jad download properly on the phone. Then I show a dialog by phone asking me to download the 686 K file. I click on the Download"" button.

  7. the blackberry handheld and then stop to think a bit... did something... I don't know what. Does not even start the progress bar indicator (However, I see a call to the Web server asking the parent jad only. No child COD file no is required app server logs).

  8. it is not any problem with the Web server mime types go because the Web server can serve other COD files to other phones (8330 for example) without problem.

  9. I do NOT use WAP browser to download. I use the regular BB browser.

  10. I also tried side loading via the USB cable. But I get the same error... However, with the sideloading, I get a little more information. Whereas the OTA just says "907 invalid COD". If I store the COD and jad on the SD card and try to load it from there, I get "907 invalid cod unable to import zip file. It was weird.

  11. then I try to unzip the parent COD, to take all 10 children COD files and put the 10 files with the file jad on the SD card. Then I try to install from SD card. Now I get "do not find the file 907 invalid cod.

  I'm confused as to what may cause this problem. What we can do to move apart from this problem? Any help would be appreciated. Everyone knows about similar problems? Is the size of the file, is the carrier, it is the phone, it's the browser... I'm lost.

  I was able to understand the reason. Have absolute URLS for RIM-COD-URL-xx instead of parent URLs seem to have solved the problem. For some reason any with the relative URL was causing a problem.

• 907 invalid cod exceeded the limit of the number of OS 5 bytes

  Hello

  I do face-down issue with jad installation from a Web server. I put all my files of cod with a jad file in our weserver. and appealed to the jad file. After a few seconds, the message as below. The same thing works with phone OS 6 version, but not with the OS 5

  907 invalid cod exceeded the limit of the number of bytes

  Thank you

  RAM

  If you are testing on simulators on the same PC running the same MDS Simulator, the article on connection limits may apply.

  Sorry beat me to it, I've never had the OS 5.0 browser throw up his hands on a download I created it, that the OS 6.0 browser was fine with.  The size of your files is not huge.

  If you really want to count the MDS Simulator out run, start the WiFi on the 5.0 OS simulator (manage connections--> set up the Wi - Fi network, you follow the nose, and then start the WiFi on the device), then change the configuration of the default browser (--> Advanced--> browser Options) in the Hotspot browser.  Stop the MDS Simulator and see if you can still browse.  Then, try the download again.

• BlackBerry smartphones can not update AppWorld 907 invalid COD

  Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

  -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

  - Then I download the update.

  Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

  I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

  Hi Firdaus92

  In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

  Search and download your OS and everything above applies

  By sdgardne 

   

  However, here's what I propose...

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Error 907 invalid cod when the OTA

  Hello

  I have a problem with OTA Download on
  v4.1.0.268 (Platform 2.2.0.112).  BB 7250 on cdma network.
  It says Error 907 invalid cod

  the jar/jad/cod are created with JDE 4.6

  However, I can do OTA using BB 9000 download emulator with the same files / same url.

  I followed the diagnosis mentioned in
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/support...

  all sizes are correct in the jad file. I so should something specific to older devices BB when I deploy the applications of OTA?

  Here are the jad:

  Manifest-Version: 1.0
  RIM-COD-Module-name: TestSpeed
  RIM-COD-Module-dependencies: net_rim_cldc
  MIDlet-Jar-Size: 30100
  MIDlet-1:.
  RIM-COD-creation-Time: 1224023296
  MIDlet-Jar-URL: TestSpeed.jar
  RIM-COD-URL: TestSpeed.cod
  RIM-COD-SHA1: ef 3 b 05 31 and 21 a5 a7 9 d 3 c 4 c 6 c ed 6 d a6 bf 1B d3 a8 3f e0
  RIM-COD-size: 26200
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Version: 0.0
  MIDlet-name: TestSpeed
  MIDlet-vendor:
  Microedition-profile: MIDP-2. 0
  RIM-MIDlet-flags-1: 0

  It's okay that APIs are used (the cod itself file format has changed along the way).  Please visit the following link.

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/What_Is_-_Appr...

• Blackberry error: 907 invalid COD closed stream

  Hi I am trying to download the Blackberry application

  But when downloading after a certain time, it gives the error 907 invalid COD closed stream.

  What is the problem with this and the solution for it.

  I cleaned my browser cache and it worked for me.

• BlackBerry Smartphones 907 invalid COD

  Can someone tell me what this error message?  I try to download the Sirius/XM app and get this message.

  Your download source has been removed or deleted the cod files required for installation.

  In other words, not good... will not work.

• 907 invalid COD: HTTP 404 error: not found

  Argh.  I've been messing around with some .wav files, including in my application and I got 907 errors.  Now, I have removed the .wav files and returned to what I had working perfectly last week... and I get this error message.  Can anyone spot the problem... This _was_ work:

  Manifest-Version: 1.0
  RIM-COD-Module-Name: Tracker
  RIM-MIDlet-Position-1: 1
  RIM-COD-Module-Dependencies: net_rim_cldc,net_rim_locationapi,net_rim_bbapi_invoke
  MIDlet-Jar-Size: 23776
  MIDlet-1: ,,
  RIM-COD-Creation-Time: 1217855394
  MIDlet-Jar-URL: Tracker.jar
  RIM-COD-URL: Tracker.cod
  RIM-COD-SHA1: c3 bd fb 96 5d a3 f5 1e 8d 84 5e 70 40 fd fc 4f 72 7c 15 d9
  RIM-COD-Size: 27104
  MicroEdition-Configuration: CLDC-1.1
  MIDlet-Version: 1.0.0
  MIDlet-Name: Tracker
  MIDlet-Vendor: AVendorName
  MicroEdition-Profile: MIDP-2.0
  RIM-MIDlet-Flags-1: 0
  

  We their normally just bundle the application as a file included.  You can add them to the project as a file in the jde will right clicking the project and selecting Add the file to the project.  If you use alternative building method, you can do so by including them in your jar of entry for CAP.  You can then access their call of .getResourceAsStream (resourcePath); on any class to search for a file.  There is an article in the knowledge base on it.

  If this causes problems of size of module, you may need to create some kind of resource downloader that saves your files to disc using JSR - 175 or storage of content after downloading the application successfully.

• OTA download fails to halfway through, Error 907 invalid cod

  Hey all, trying to get my application configured via the site, I downloaded cod of the child and the jad file and try to upload. Download pushing me, I say Yes and it starts but then it gets an error at a random in the download time as if maybe the cod that a child is not valid? Sometimes, the error immediately, sometimes after almost finished, thanks for any info or advice.

  To remove a possible cause of this error, remove your app from the target phone before installing.

  There is usually a button detail associated with this error - what does say?

  Have you looked through the many 907 threads on the forum of ideas?

• Problems of the JAD and COD file

  I was testing a blackberry app and it installed without any problems. I made some changes to code today and he stopped same download to the device correctly. After some digging around in the .jad file, I noticed it's all suddenly you're looking for a brother COD (NomMonProjet - 1.cod) file although this cod file is not created when I build the project. Now, I can't get the app to install at all (it works well in the emulator).

  Any ideas as to why this started happening and how I can fix this problem?

  Sorry guys, tried to search the forums for this and found nothing. Problem was I didn't know what to look for. I finally got the app to download and got an error 907 invalid COD . A search on that quickly gave me my answer. I added an image that made the application to big - brother COD file creation and makes it impossible to install over the air.

• Generated JAD file lists the strange COD files

  I use BB JDE 6.0.0. and it generates a JAD file for the project. The problem is that it lists the COD files, which are not used. I pasted the contents of the JAD file below. COD generated file is AstralEffects.cod, but there is no file AstralEffects - 1.cod or AstralEffects - 2.cod.

  How can I remove these COD files are not used in the JAD file? I tried to remove them manually, but then I got ' 907 invalid COD: impossible to import the ZIP file. I'm trying to find a way to change the JAD of BB JDE 6.0.0 file, but I can't find an option like that. So, how can I change the generated JAD file?

  Manifest-Version: 1.0
  MIDlet-Version: 2.2
  MIDlet-Jar-Size: 171299
  RIM-COD-URL-2: AstralEffects - 2.cod
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Jar-URL: AstralEffects.jar
  RIM-COD-Module-dependencies: net_rim_cldc
  RIM-COD-SHA1-2: ed 81 41 47 32 BA 7f b7 9 d 6a e6 78 83 e9 ff 71 83 11 a9
  RIM-COD-URL-1: AstralEffects - 1.cod
  RIM-COD-SHA1-1: 04 25 03 50 FF e8 4 b d6 63 77 12 d8 f1 7f 67 60 85 6 9th 2f d
  RIM-COD-size-2: 42088
  RIM-MIDlet-flags-1: 0
  RIM-COD-size-1: 48192
  RIM-COD-Module-name: AstralEffects
  MIDlet-name: AstralEffects
  RIM-COD-size: 71800
  RIM-COD-creation-Time: 1291403520
  MIDlet-1: AstralEffects, AstralEffects.png, AstralEffects
  RIM-COD-URL: AstralEffects.cod
  RIM-COD-SHA1: 31 34 46 79 8 7f c2 d 2B f7 19 98 c0 f6 bb 03 c3 2 df c 78 c0
  Microedition-profile: MIDP-2. 0
  MIDlet-vendor: mobile visuals

  Once you rename the original to the extension ZIP and unzip, ther original COD there not more, right? You should deploy all of the files that I unzipped from the aggragate COD.

• Install problem COD file

  Hi all

  I know it's important to look for answers before posting and I spent several hours to do.  I found a few related messages, but the solutions did not resolve my problem.

  I have a J2ME application that is fully tested for the game.  It works fine when it is installed as a pair of jad/jar on each Simulator and device I've tried.  And the midlet icon appears in the interface of the phone, just as it should.

  The game uses no RIM specific libraries or modules.  As a jad/jar pair, the same build runs on dozens of non-blackberry devices.  The code in the jar detects that the phone is a blackberry using System properties and the game is its own minor configuration to look nice on a blackberry.

  The next step is to convert the application into a cod file and sign it.

  You use the JDE 6.0, I made a new project, imported the jad/jar and run the Build command.  The cod was created, and accordingly modified jad.  So far so good.

  I have my signature identification information, and once again, using the JDE, I ran request Signatures.  The interface reported success.  No problems.

  The cod file is 207 k and consists of 4 cod files.  I read the instructions for this case and unpacked the cod file in its 4 cod files.  App.COD, 1.cod - app, app - 2.cod, app3.cod.

  I've posted four cod files as well as the jad file on my server, the server apache even where I serve regularly jar/jad files.

  I have triple checked the mime types in the .httaccess file.  Mime types are correct for jar, jad and cod.

  I point the browser on the Blackberry 6.0.0.337 Simulator 9800 to the jad file.  I get the download window with the properties of jad and the download button.  I click Download.  If I do this a second time, I get the button replace, so the Simulator think that the file has been downloaded, in this case.

  It seems that the files are for download.  The watch cursor appears 4 times, probably once for each file in cod.  No errors.

  At the end of the download, I get a message "the application has been installed successfully" and an OK button.  But, no run button, as I get with the installation of the pot.  I click OK.

  I exit the browser and return to the main screen.  There is no download folder.  The game is not in the folder games or Applications.  If I go to Options/Applications, the game is not listed there.

  If I menu click the Options/Applications window, I get: JVM 104 Eception NullPointerException error.  However, I had not yet tried to run the application.  A stack trace turned up a few odd lines:
  UI - EUI no face is detected
  VM - BORK
  However, I do not know what generated those lines or when.

  By the way, I also tried to download the full 207 k cod or in this case, I get the 907 error expected because the jad file is referencing files of cod that the server could not find as separate files.

  I also tried to download other simulators, for example 5.0.0.54 5 9700.  As above, the files seem to download very well and I get the message: "the application has been installed successfully" and an OK button.  On this Simulator, there is a download folder, but it is empty.  The game is not in games or in the Applications folder.

  On this Simulator, I go in the Options/Applications, and there is an entry for my game.  The title of the game is OK, but there is no icon.  I opened the entry and get title properties and a delete button.  There is no run button.  It shows the installed date and another button for the properties of the Module.  It also shows the size correctly and the signatory IDs.

  I also tried this procedure on a physical device, the AT & T 8300.  I had the same behavior as the 9700 Simulator.  Again, there is no problem with installation of the jad/jar.  The problem is with the jad/cod/COD-1/cod-2/COD-3

  Why is - this game appearing to successfully download and install successfully but apparently not be installed can thus be run?

  Thank you for your time.
  Alan Weiler

  I think I found the problem.  I skipped a step during the cod using a jar of J2ME as a source of files.

  In the projectroperties:Application panel, I do not enter the name of my main class name of the Midlet main class field.  Apparently this area causes the main class to be the entry point.

  With the class entered into this field and re - build the cod file and new signing, I was able to download and run the game on a device.