"fps not in real time.

Similar Questions

• Why - what is say fps not in real time?

  Whenever I have try to put images in sequels it is delayed and sometimes stops and it is said in the upper right fps not real-time

  Are you new to AE? You're doing a ram preview? After Effects uses a completely different method of reading a NLE or a media player. Sometimes it takes a while for your system.

  We don't know any specificity unless you give us details about your project, your system and your version of AE to the last comma. More often, people try to preview segments of length of a model of EI at full resolution (resolution should never be higher than the zoom factor). I have mine set to Auto in the window of the model and usually have 50% zoom factor. You're probably a little more taxing your system.

• RAM Preview plays is not in real time on the new Macbook Pro

  Hello world

  I have problems getting after effects to play the video in real time in AE CS6. I use a brand-new Macbook 2015 Pro 13 "retina with a dual core 3.1 GHz processor Intel Core i7 and 16 GB of RAM. I just made sure my copy of AE CS6 is up-to-date with the latest updates (11.0.4.2), and yet I am unable to read the video or animation in real time using the RAM Preview to any size greater than 25% in the Viewer.  If I try to play a video clip of 29,976 fps, the framerate tops out at about 17-18 frames per second. When I press 0 for the RAM Preview, it starts caching the images such as normal, but even after a loop continuous cadence comes not near real-time. The audio plays fine, but the video starts immediately behind. I can't even a scene of simple great test of a form of retouching layer move on the playback screen in the real time RAM Preview.

  That said, I can get it to play in real time if I reduce the viewer up to 25%. But obviously, I won't be limited to work in quarter resolution on a new laptop. My last Macbook pro from 2008 and completely across the well treated RAM previews, being able to cache images and play them back in real time without problem.  I have to assume that there may be a function that I'm missing or something goes wrong, unless I just grossly overestimated the capabilities of my new laptop.  But surely, it should be able to manage simple video playback. I had no problem using first on this computer, then it can of course deal with the video.  Any help you can offer would be much appreciated, because this problem becomes really frustrating!

  Just for fun, try the trial of CC 2015 and see if it behaves correctly.

• Read a signal scope works in execution to highlight, but not in real time

  I want to get the maximum value of a waveform to a former stretch of Agilent 54622 via GPIB.

  The problem is that I regularly receive a Visa Read error-1073807339 ("timeout expired before the operation is completed") when running in real time, but NEVER in execution to highlight mode.

  The posts here suggests that the calendar can cause the read to run before writing was able to finish. So, I used one - manually controlled while loop, sequence and blocks waiting for try and ultra Structure separated blocks of reading and writing of overlap between them. But it still does not work!

  Suggestions, please? (Thanks!)

  

  If you happen to open the VI I attached, you will see that I use a serial port. This is because I use a USB of Prologix-GPIB adapter to interface with the scope (I don't have an adapter USB of NOR-GPIB). I used successfully this Prologix adapter for over 2 years to connect perfectly with an amplifier to locking SR830 and several other devices, so I don't think that's the problem...

  What you need is the magic behind fairy!

• Back to cache a sequence the old way. not in real time during the introduction of the cache

  Hi supports,

  I have problems of my sequences caching. As long the AE is always rendered images my reading is never in real time, it will be stutter audio until operations complete are cached. Makes me and my clients go nuts, so every time I want to playback of a composition, I manually turn off the audio, the cache of the sequence playing, which makes them note every time, "Oh a little slow" and "There is no sound" etc and I have to explain that his not playing not, just cached.

  I went back to the old way: Cache first before reading. The real-time playback + caching does not work...

  Also the 'working area of the Cache in the background "has disappeared... Why?

  And Im working on fast mac:

  CPU: 2 x 2.4 GHz Quad - Core Intel Xeon

  RAM: 48 GB 1066 MHz DDR3 ECC

  Boot SSD disk

  FusionIO Cachedisk

  My support is on a fiberstorrage Facilis (4K DPX real-time playback)

  If you have present clients, I totally recommend cache before play (like the old RAM Preview) option. Unfortunately, you can not have cache in the background (yet). I've linked the explanation in my response to your other post.

  Have you seen the preview videos or all the videos of NAB? The next version of AE wants to focus on the stability of playback, speed, etc. so it could get a little better. Acceleration using GPU for some effects (finally!) makes a big difference!

• CTI / read head plays is not in real time

  Whan, I'll see my animated film that I drag the CTI that my animation jumps rather than smooth running so I can see the animation.  It's like if I don't see a step at a time, including at - it a setting I need to change.

  Really, you must generate a RAM Preview to see your reading of the animation in real time.

  It is unlikely that you will see the results in real time by rubbing the CTI, unless you have an extremely powerful computer and a very simple and minimal project.

  Even in this case, it is probably still unlikely.

  Alternatively, you can set the mode of previw to Adaptive Resolution to help scrub perceived, but the resolution of the model will reduce the CPU trying to catch the movement through the timeline.

• Overview of RAM is no longer real time

  Work computer.   Mid-2010 Mac Pro with 64 GB of RAM.  Version 11.0.4.2 running After Effects.   Multiprocessing turned off.   V3 AJA Control Panel.

  1920 x 1080 comps, 29.97 FPS, no 3D.

  The Mac was running RAM previews and Mountain Lion were BEAUTIFUL.  Questions to zero.             Never.

  The computer has been upgraded to the Mavericks 10.9.5.      I use the upgrade of the vague term, BTW.       Now...  RAM previews play more in real time.  Plus I get - it fluctuates - is 19, 20, 23 frames per second, never 29.97.    Sometimes he hits all the way up to 40, 45, 47, as he plays catch-up, but this is rare.

  -Restart the computer. No change.

  -All projects.   Makes no difference, old existing or new projects.

  -Even a simple projects 1-layer with simple position animation, no effect - not in real time.

  -8 bit, not only 16 or 32-bit mode.

  -Color on and outside management.

  -Simulate the output on and outside.

  -Preferences-> video preview has been updated AJA, so I tried only computer monitor.  It does not either.

  -Full ground, half, quarter.... is not serious.    Never in real time.

  I've seen others ask to this subject, but none of the positions ever trained 'you need to set 'this' to 'who',' etc.        Have any suggestions?

  Thank you

  Marc

  Have you tried to uninstall the drivers of the AJA?

• Able user to zoom in/out the image in real time the performance of façade?

  Well I have searched this and have developed empty. What I would do, is to have a picture of a diagram on the front panel and during execution of the VI user can somehow zoom in/out the image in real time.

  I know there is something that is called Zoomfactor that you instantiate a way in the block diagram, but that seems to zoom in on a picture of race prior to the program. The zoom is not in real time. There is no possibility of real user to zoom in/out with free will, using the Zoomfactor I see. (Sorry I forgot display name of the service). And I saw messages by a man named George Zou that seems to come with a VI which is closest to what I want, but I pulled the VI site seems not compatible with my computer (my rig is under XP with Labview 2013 currently). So, I was wondering if someone else had found other answers appropriate to my specifications?

  Use a structure of the event to change magnification during execution.

  You can even program your own shortcuts to the structure of the event, for example if the user clicks on a particular point on the picture and you read this coordinate on, and you zoom way at this point remains in the Center... There are many options to play with...

• Problem with disable real-time protection

  Security Essentials recently installed, off continually Protection in real time. When I try to turn it back on, I get the message: 'Security Essentials could not activate real-time Protection.' "" The operation is finished because the deadline has expired. "'Code 0x800705b4 error '.

  Can help you solve the problem please?

  Hello

  you will receive the correct help for your question of MSE MSE specific forums

  Use the link below to the repost here

  http://answers.Microsoft.com/en-us/protect

• After Effects not replaying in real-time. How it allows playback in real time on my Imac 5 k? It is not always current.

  So I just got AE on my Imac 5 k with any apps and for some reason, none of my video clips read in real time. I work mainly through Lynda.com files and the files that I use are read in as 14 fps out of 29 or more, sometimes less. How to solve this problem?

  There is a bug in works of the AE on El Capitan.

  There are workarounds. Either hide the playback during playback cursor (easily done by making the full screen of the composition Panel by pressing on the ' key [same key as ~ on U.S. English keyboards]), or by the docking station to another panel located under your Control Panel Assembly as follows:

  

  If you want a discussion involved on the issue, you can read this thread, Re: after effects 2015 will not get a preview in real time after update to El Capitan., but it is not terribly useful. Too many messages of frustration that diverts the useful substance. Basically, Adobe is aware of the problem, but it took them some time to identify what was causing it. They think they now have a good handle on it and they are hoping to get out the fix in the next update - whenever it is. Meanwhile, the previously mentioned workaround solutions you should get high and go.

• How do you download a newer version of time Labview real-time in PSC-2200 when is not not in MAX?

  I can't figure out what I need. My PSC 2200 has a version of Labview RT 8.5.1 and fieldpoint 6.0.1.

  I need to be at least RT 10.0 Labview and fieldpoint 6.0.7 because I do Ethernet IP. I don't know that anything more recent that it will work as well.

  As far as I know, I downloaded fieldpoint 6.0.12 and I have the Labview RT 10 module. What Miss me to update software on the cFP-2200 by MAX?

  I don't know another software in the software other than what is currently installed real time Wizard.

  

  Software shown MAX:

  

  Any help is appreciated!

  Thank you.

  Wow, Fieldpoint 6.0.1 was released in 2008 - which has been in the LabVIEW 8.5.1 / 8.6 times.  If you want to use LabVIEW 2010RT, you really need to upgrade.

  Try to download and use Fieldpoint 6.0.11: http://joule.ni.com/nidu/cds/view/p/id/3073/lang/en

  LabVIEW Real-time is not "natively" delivered with Fieldpoint or cRIO supported, these happened as part of the RIO or Fieldpoint support modules (so that the most recent versions of RIO or Fieldpoint update your support).

  Who give a shot!

  -Danny

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you

• File not found when you try to call a dll on LabVIEW Real Time machine

  I have a dll called "DLLRTTEST" that I wrote, and claim successfully on my host.  Now, I try to call this dll from a vi that is on my computer in real time.  Currently, I get a message 'error 7 occurred at the crux of library DLLRTTEST.vi. call function' when running

  In the attached screenshot, I try to ensure that the vi that I am running is indeed on the system in real time.  I then use a 'check if file or folder Exists.vi' to confirm that the dll that I'm about to call exists on the system in real time as well.  However, I always get an error "error 7 file not found" from the node call library feature.

  Any help is appreciated.

  Thanks again for all the responses.  As I said earlier, I had already met and solved the problem identified in the link provided by Nathand.  I had to go down to Visual Studio 2008 to go beyond this particular error, after which the app of auditor of the dll in real-time reported my dll needs to run successfully.

  I just got the phone with Jack in charge NEITHER well, and it turns out that I simply had to compile my dll in release mode.  Decommissioning of VS 2008 I got the correct version of dll (msvcr90.dll), but since I am compiling in debug mode, I found myself using msvcr90d.dll (d for debug) who doesn't have my computer in real time.

• UDP playback does not work on a real-time target

  Hello

  I am running LabVIEW RT 8.6.1 on a PXI 8106 RT controller.  LabWindows/CVI for RT 9.0.0 execution engine is also installed that I develop using LabWindows/CVI 9.0.  I'm trying to send some data UDP for an external PC via the network for software running on the controller, but this does not work.  The UDP packets are certainly get sent (I receive on my PC when the transmitter to reconfigure my PC IP address) but the UDP callback function is not called.  The call to CreateUDPChannelConfig returns OK.  Here's the (very simple) code that I wrote based on the example of reading NI UDP:

  #include 
  #include 
  #include 
  
  // Global variables
  static int reader_channel = 0;
  
  // Global functions
  int CVICALLBACK UDPCallback (unsigned channel, int eventType, int errCode, void *callbackData);
  
  /// HIFN The main entry-point function for the Real-Time DLL.
  void CVIFUNC_C RTmain (void)
  {
      int errno;
  
      if (InitCVIRTE (0, 0, 0) == 0)
          return;    /* out of memory */
  
      // Create UDP receive task
      errno = CreateUDPChannelConfig(49152, UDP_ANY_ADDRESS, 0, UDPCallback, NULL, &reader_channel);
  
      while (!RTIsShuttingDown ())
      {
          SleepUS (1000);
      }   
  
      CloseCVIRTE ();
  }
  
  int CVICALLBACK UDPCallback (unsigned channel, int eventType, int errCode, void *callbackData)
  {
      static int udp_received = 0, default_rx = 0;
  
      switch (eventType)
      {
          case UDP_DATAREADY:
              udp_received++;
              break;
          default:
              default_rx++;
              break;
      }
  
      return 1;
  }
  

  All that happens is that software is just waiting for the callback to be called (which never does).  I found this ad that described a similar problem, but the developer was using LabVIEW and although he has found a way round the problem, he was never heard as to why it worked.

  Thank you

  Martin

  Hey,.

  Although the problem is now resolved, I thought that put the code for others see if the same error is encountered. The modified code is tested and works. It is saved as an attached png file.

• "1 MHz" for the name of the source on the time loop does not work on LabVIEW Real-time 9.0

  A Loopis Timed running as expected if a time source is manually chosen in the dialog box of configuration for "1 kHz" (first digit) and "1 MHz" (second digit). If the time Source name is set through the input of the channel "1 kHz", the loop is executed, too third figure). But if the input string is "1 MHz", the loop is not executed (last figure). The channel two are created by "create constant" on the entry of the loop to exclude typos. Is it possible to set the Source of a loop time timed through the input string to the real-time clock hard Mhz?

  

  

  

  

  OK, I was a bit confused by the difference between the behavior of error...

  Now, the question is quite clear. Aid for the timed loop provides the following regarding the Source of the calendar entry:

  Specifies the name of the synchronization source to use to control the structure. The source of synchronization must be created using the create synchronization Source VI on the block diagram or selected in the dialog box Configure the timed loop .

  So, I think that you have somewhere in your code a time Source.VI create if you pass "1 kHz" as the name. But you did not do this for your clock "MHz 1"...

  hope this helps,

  Norbert