Sampling of multiple channels on the same frequency

Similar Questions

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• Re: Satellite L735 PSK0CE: WLan and BT use the same frequency

  Hello world

  I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth

  Can you help me with this problem?

  Thanks in advance

  Post edited by: aku - aku

  Hello

  WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.

• Flash Player playing multiple tones at the same time... even when the browser is closed

  I recently updated my Flash drive to 11.3 (latest version). When I go to a site that uses Flash (YouTube, for example), I'll start the video and then 10 seconds later, I get multiple tones at the same time. They all look like advertising, or TV stations. Even when I close my browser, the sound continues. When I opened my sound mixer, it is a "program" listed in "winrscmde", who plays both audio channels. When I go to the Task Manager, "winrscmde" presents itself as a svchost.exe * 32. When I stop this service the sound stops. It will resume again when I access a flash site. When I uninstall Flash Player 11.3, it stops.

  I am running Windows 7-64 bit with latest updates. THAT IS TO SAY 9.0.8112.16421

  Any help would be appreciated.

  Well, I think I solved the problem.

  I found this topic:

  http://www.bleepingcomputer.com/forums/topic442928.html

  On the second post down, the poster recommended download killer TDS winrscmde.exe is disquised as svchhost.exe in the \windows\system32 folder (you click on 'Properties', then the 'Détails' tab and check the original file name... If it is false, it will say winrscmde.exe under the original name).

  I also ran the program aswMBR as well as FixTDSS (http://www.symantec.com/content/en/us/global/removal_tool/threat_writeups/FixTDSS.exe).

  That seems to fix the problem. Just reinstalled Flash and do not get the same questions. The svchost.exe in the \windows\system32 folder is legitimate!

  Hope this helps someone else with the same problem.

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• How to switch between multiple windows in the same application?

  Hello

  I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.

  Here is what I feel...

  Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.

  I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.

  With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?

  Strangely, I can't switch to the "about this Mac" window.

  The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.

  Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?

  Thank you

  Avinash

  In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.

• Multiple copies of the same mail and "unresponsive".

  I have fought with Thunderbird for about a week now and have had no chance to solve my problems. Any help would be greatly appreciated! I tried all the suggestions on the FAQ page.

  Here are my symptoms:
  -Make multiple copies of the same email with the same time stamp.
  -Not pulling new e-mail messages.
  -Whenever I try to navigate upwards or downwards in the Inbox or open an email TB will does not.
  -J' got warnings from the following script:
  Script: resource://gre/modules/XPCOMUtils.jsm:323
  Script: chrome://messenger/content/mailWindow.js:179

  Here is what I tried:
  -J' completely removed and reinstalled TB (and recovered my profile).
  -J' have compressed files.
  -J' rebuilt the database world.
  -From TB in safe mode does not seem to make a big difference.

  Fortunately, I have access to webmail via my ISP and it works fine.

  Thank you!

  McAfee has released a faulty update, please contact them for support on changing the setting to something that actually works.

  I saw a poster here today who used their support chat and they 'fixed a few adjustment' and now all is good.

  Not good was not what I wanted to say

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Can I have DVB - T and DVB - C channels in the same list?

  Toshiba TV have analog tuner, DVB - T and DVB - C.
  Can I use the same time channels DVB - T and DVB - C?

  My TV is connected to the cable operator with DTT and DVB - C signals and I would like to have channels on the same lists.

  Darek

  Hello

  I put t know what Smart TV you have but I n t think you can mix terrestrial (DVB - T) and digital cable (DVB - C) channels.

  My TV supports also DVB - T and DVB - C tuner and it is not possible to add DVB - T & DVB - C channels in the same list.
  However, I think in such cases its always recommended to read the user manual where these details and information are mentioned.

• Firefox open multiple tabs of the same site at the same time, why

  some site that I visit - when I try to use yahoo or facebook, messaging - multiple tabs of the same pop up and open and bring me to this last open tab - never let me finish what I'm doing. Why is this happening?

  I had this problem (when I opened Firefox, Facebook kept several tabs open, even when I was on other sites such as Google).

  After you restart Firefox with modules disabled (via the Help menu Firefox), I enabled first of all Plugins, then the Extensions, on-to-one.

  The problem is back only when I activated Facebook Toolbar 1.7.3 and disappeared when I disabled it again.

  This extension has been updated on 3 August 2011, which is probably when the problem started to appear (worse gradually). The extension tries to integrate some utilities of Facebook with the browser, but it's something that I can easily live. If you are having similar problems, try disabling Facebook Toolbar 1.7.3

• Multiple accounts with the same email

  I have an account I can not connect to after my daughter it has disconnected. I tried to reset the password, but I get an email on my account to other girls: S (same email)
  I guess I have 3 accounts with the same email, but only the latter can created recover!
  Not even my main Skype has a chance

  I'm not 100% sure but it is most likely that I used the same email to whoever I have to reset - what can I do?

  In fact, this morning I managed to log on to the account of an iPad without frills but the pc refuses to sign ^ ^ ^? "Skype cannot connect" - what is happening?
  
  I also discovered that I could connect via a browser, but not via the Skype program... So I uninstalled and installed again and it's working now...
  I've now changed the email so I have 3 accounts with the same email address as Skype seems not to be able to manage multiple accounts with the same email!

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• Tecra M4 - WLan & BT broadcast on the same frequency

  Dears I have problem with my Toshiba laptop tecra m4 and I did the below:
  # disabled Bluetooth, infra & LAN (no result)
  # Update driver Intel pro 2200 wireless (no result)
  # change frequency (no result)
  # updated the wood driver (no result)
  Please note that I can connect WiFi only in the same room that the wireless device exists and after connect go to unplug every minute

  Can I connect a wireless network to the same machine room wireless and when I connected the LAN disconnected every minute

  On the otherhand, I got the message on the screen of my laptop below:

  Bluetooth (TM) and LAN wireless devices operating in the same frequency range and may interfere with each other. If you use Bluetooth devices, and at the same time, wireless LAN you can sometimes meet optimal network performance or even lose your network connection. In this case, always stop the exploitation of your wireless LAN or Bluetooth (TM). Please contact Toshiba PC compatible product on the web site

  [http://www.toshiba-europe.com/computers/tnt/bluetooth.htm] in Europe or

  [http://www.pc.support.global.toshiba.com/] to the United States for more information.

  Help is a high apprciated

  Hello

  It seems that BT is enabled with the WLan card and this affects the WLan functionality.

  Try to disable the BT and choose only the LAN card, using the FN + F8 key combination.

  Welcome them

• How to select multiple cells at the same time?

  Hello

  How to select multiple cells at the same time? What is the keyboard shortcut?

  Thank you to.

  Flo, a french guy.

  Hold down the CMD key when you select the cells.

• Can I use USRP 2 channels at the same time to receive a signal?

  Hello world

  I want to do an implementation of the time difference of arrival between two receivers (antenna) estimate. I have a kit USRP, Remora and two antennas. There is only one signal source (it is transmitted in nowhere is not serious).

  Can I use two channels at the same time the USRP to receive a signal?

  I need the original source signal and the delayed signal version.

  Thanks a lot for your help.

  Sincerely yours.

  Uysal.

  Hello

  I found this post on the forum that can be useful for you.  Looks like you can not receive two antennas in the way you describe.  I think that this would require a configuration USRP two.