fract/exp to problem number string.

Similar Questions

• Fract/Exp Numbe display Format string

  I have a digital channel that has a decimal value with accuracy up to 16-digit figures. I want to convert this string to a numeric value, and I used a "Fract/Exp number necklace. In my VI I hae set:

  Data type: EXT (because it allows number of decimal digits of 15 to 20)
  Data format: covered Point
  Numbers: 16
  Precision Type: Digits of precision

  Here's my question: If the input string is composed of digits of precision = 15 Eg: 5.369607712106161
  Then I output = 5.3696077121061609, which is the same, but not the same number I sent.
  or 1.145152879691825 String gives me the number = 1.1451528796918251
  String 5.818356760119754 gives me the number = 5.8183567601197543

  Please suggest how I can make more specific output.

  Thank you.

  Kind regards

  H.

  Wire a constant to the default value with the entry of your string to the function of numbers and define the type of POSITION, it is default DBL (note the red dot on your meter).

• Problem with string to Int conversion

  Dear friends,
  
  Problem with string to Int conversion
  
  I'll have a column where most of the values is digital. Only 4 values are not numeric.
  
  I have replaced the non-numeric values to numeric in order to maintain the data type.
  
  Grade.Grade DEAL WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade OTHER END"
  
  This is the result as inactive
  
  Grade
  
  _0_
  
  _1_
  
  _10_
  
  _11_
  
  _12_
  
  _13_
  
  _14_
  
  15
  
  _16_
  
  _17_
  
  _18_
  
  _19_
  
  _2_
  
  _20_
  
  _21_
  
  _22_
  
  _23_
  
  _24_
  
  _3_
  
  _4_
  
  _5_
  
  _6_
  
  _7_
  
  _8_
  
  _9_
  
  Discount
  -            -            -
  
  Now I want to convert this value in digital and do some math
  
  So I changed the formula as below
  
  Cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an INT. ELSE")
  
  
  Now I get the following error
  View display error
  Driver Odbc _ returned an error (SQLExecDirectW). _
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  _State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 1722, message: ORA-01722: invalid number in the OIC calling OCIStmtFetch. [nQSError: 17012] In bulk fetch failed. _ (HY000)
  SQL issued: SELECT cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an int. ELSE") seen'Human Capital' 0 - Costing Manpower WHERE LENGTH (Grade.Grade CASE WHEN 'E1' THEN '20' WHEN 'E2' THEN '21' WHEN 'E3' THEN '22' WHEN "E4" THEN "23 ' ELSE Grade.Grade END) > 0 ORDER BY saw_0_
  
  Discount
  
  
  
  
  
  Could someone help me
  
  Concerning
  
  Mustafa
  
  Published by: Musnet on June 29, 2010 05:42
  
  Published by: Musnet on June 29, 2010 06:48

  Are you sure you don't have another non-digital value in your column. I want to get this filter temporarily just to check if your plaster works or not. If it works, then you can remove this filter.

• Problem of string manipulation

  Hello
  
  I have a problem with string manipulation. I need to compare the character with his next character.
  as an example consider the string as "fat".
  'b' must be compared with 'o'.
  "o" by 'l' and so on.
  I used below the code snippet.
  
  
  for (int i = 0; i < s.length (); i ++)
  {
  int j = i + 1;
  If (s.charAt (i) == s.charAt (j))
  {
  status = false;
  }
  
  on the other
  {
  status = true;
  }
  }
  
  But I get an error message. Help, please. Thanks in advance.
  
  Published by: Vinayjgeorge on June 1, 2011 12:26 AM
  
  Published by: Vinayjgeorge on June 1, 2011 12:39 AM

  (1) for the validation of code, use the code tags so that it will be readable: http://forums.oracle.com/forums/ann.jspa?annID=1429

  (2) "I get an error" means nothing. Do you think that there is only a single possible error that may appear in the Java code and the only possible thing that can? If this isn't the case - in other words, if you don't know that there are different errors and causes - so why you thought that simply say "I get an error" without any details would be sufficient to describe the error? You must copy and paste the exact, complete error message, if you want to communicate clearly what problem you encounter so that people can help you.

  Please put a little more thought in upcoming posts.

  That said, in this case, it is easy to see an error you will get. Loop tells you ' for each character in the string, compare this character with the next. " You can see why it does not work? When you get to the last character, the comparing it to that is not possible, because there is not a next. You say "for all characters except for the last, compare it to the following."

  Once correct you that, you always seem to have a logic error. You are just blindly setting status to each character, so when you're done, just status will contain everything that produced the last comparison. It might go back between true and false to each character, but the only one that will count will be the last.

  Edited by: jverd May 31, 2011 12:06

• Problem number (scientific notation) string vs

  Hi all

  This has been driving me crazy now for what feels like eternity. To illustrate my problem, I have associated my code as much as possible for only the parts needed. Please, if anyone can help, I would be very grateful. (I will not be able to graduate without completing this nightmare project, and it's the only part that I'm stuck. "It is essential to the function of the program.)

  Thank you!

  The program (this part of it anyway):

  The program should import the contents of an xml file and place them in a datagrid control. The DataGrid contains two columns: membership and evaluated.

  The problem:

  Evaluates seems to be automatically converted into a number... and the WRONG number to that! It is CRUTIAL that this value is imported as a string or the correct number. In addition, it is only evil sometimes. (See 1G2I vs NP_126160).

  Table of problem: Evaluated in Flex must be the same as rated in XML

  Membership	Rated in Flex	Rated in XML
  NP_579448	3.999999999999999e - 92	4th-92
  NP_143548	3.999999999999988e - 84	4th-84
  1G2I	1.999999999999997e - 81	2nd-81
  NP_126160	1E-80	1E-80
  YP_002959435	8th-80	8th-80
  ZP_04889592	2.999999999999994e - 79	3rd-79
  ZP_04877784	2.999999999999998e - 77	3rd-77
  YP_183697	4.999999999999999e - 76	5th-76
  YP_0002307670	2.999999999999994e - 75	3rd-75

  Main.MXML

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Application ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " = xmlns:s 'library://ns.adobe.com/flex/spark"" "

  " = xmlns:mx 'library://ns.adobe.com/flex/mx"" "

  "xmlns:views ="views.*"

  width ="1400" height ="900"

  preinitialize = "hitsResponder.token = service.send ()"> "

  < fx:Declarations >

  " .. s:HTTPService id ="service"" "

  " url = 'data / TestCase.xml"" "

  showBusyCursor ="true" / > "

  " .. s:CallResponder id ="hitsResponder"" "

  result = "service_resultHandler (event)" "

  fault = "service_faultHandler (event)"/ > "

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA [ ]]

  / * Import * /.

  import mx.utils.ArrayUtil;

  import mx.collections.ArrayCollection;

  import mx.rpc.events.FaultEvent;

  import mx.rpc.events.ResultEvent;

  import mx.controls.Alert;

  / * Variables * /.

  [Bindable]

  protected var scores: ArrayCollection collection;

  / * Managers * /

  protected function service_faultHandler(event:FaultEvent):void

  {

  Alert.show (event.fault.faultString, event.fault.faultCode);

  }

  protected function service_resultHandler(event:ResultEvent):void

  {

  scores = event.result.hits.hit; visits //push in the collection of table

  }

  ]]>

  < / fx:Script >

  "" < s:Panel id = "dataPanel" title ="results" width = "400" height ="470">

  < s:layout >

  "" < s:VerticalLayout paddingBottom = "10" paddingLeft ="10" paddingRight = "10" paddingTop ="10" / >

  < / s:layout >

  <! - results grid - >

  {" < views: TestGrid dataProvider =" {}scores}"/ > "

  <!---->

  < / s:Panel >

  < / s:Application >

  views:TestGrid.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:DataGrid

  xmlns:fx = » http://ns.Adobe.com/MXML/2009"" "

  " = xmlns:s 'library://ns.adobe.com/flex/spark"" "

  " = xmlns:mx 'library://ns.adobe.com/flex/mx"" "

  width ="100%" height ="100%">

  < mx:columns >

  "" < mx:DataGridColumn dataField = "membership" headerText ="membership" sortable = "true"/ > "

  "" < mx:DataGridColumn dataField = "rated" headerText ="rated" sortable = "true" "visible ="true"/ >

  < / mx:columns >

  < / mx:DataGrid >

  TestCase.xml

  < hits >

  < hit >

  < membership > NP_579448 < / membership >

  4th-92 of < estimated > < / rated >

  < / hit >

  < hit >

  < membership > NP_143548 < / membership >

  < estimated > 4th-84 < / rated >

  < / hit >

  < hit >

  1G2I < membership > < / membership >

  2nd-81 of < estimated > < / rated >

  < / hit >

  < hit >

  < membership > NP_126160 < / membership >

  1-80 of < estimated > < / rated >

  < / hit >

  < hit >

  < membership > YP_002959435 < / membership >

  8th-80 of < estimated > < / rated >

  < / hit >

  < hit >

  < membership > ZP_04880592 < / membership >

  < estimated > 3rd-79 < / rated >

  < / hit >

  < hit >

  < membership > ZP_04877784 < / membership >

  < estimated > 3rd-77 < / rated >

  < / hit >

  < hit >

  < membership > YP_183697 < / membership >

  5th-76 of < estimated > < / rated >

  < / hit >

  < hit >

  < membership > YP_002307670 < / membership >

  3rd-75 of < estimated > < / rated >

  < / hit >

  < / hits >

  This looks like a bug in the conversion of a string to a number. It may be a known bug, but you can drop if you want.

  In the meantime, I can suggest a work around. In your HTTPService, set the resultFormat 'XML '. This will prevent the automatic analysis of the string to a number. View your Datagrid with string values. Then while sorting, use a custom comparison function.

• LabVIEW 8.5 problems using strings with MATLAB Script node

  I am having some problems that seem to be a bug that I can not understand how to solve using strings in the MATLAB script node.

  I have two subVIs that make some calculations and both include a variable called "errortext" is a string. The two subVIs do their calculations using the MATLAB script node, so all the outputs are defined in the script node.

  The first sub - VI outputs that string and a number. The string is sent to an indicator on the front panel. The number is sent to the second Subvi which performs some calculations more and then returns another string of the same name to an indicator on the front panel. This second string is different from the first (error different two messages should appear).

  I did have problems with this in the past until this morning. This morning, it seems that two of these channels are now somehow mystically connected to each other. The second string repeat that what the first channel said despite the fact that the first string is not be linked to the Subvi where lives the second string. The only link between the two is a calculated value of double which went from #1 to the Subvi #2 Subvi.

  I tried many things: I tried to rename the strings so that they do not have the same name. Initially, he would not let me and gave me an error saying that the renowned string was a undefined variable (which is ridiculous). After removing and replacing things, I finally managed to do so I would change the name, but now it displays nothing at all and even more I think it might still display a completely different another string in my code!

  I also tried to remove the channel indicator and replace it. Yet once, it wouldn't let me initially. I would like to highlight, press DELETE and nothing. Finally after replacing all the subVIs with them, I was able to remove the flags, but this did not help the problem.

  Any idea for these problems pecular is greatly appreciated!

  I totally understand what you did, you were talking about variables in your fist post, and it was not clear if you were referring to a variable you have defined in the Matlab code, or you try to call a variable indicator/control, where is often seen on this forum (and who isn't). That said, the crux of The Matlab Script communicates with Matlab via ActiveX, and when you use a command window opens small. This is the workspace of Matlab environment. A variable that you define in a Matlab Script node will be visible in the other, even if it's in another VI (see attached for an example, figure). This is because the script nodes are running in the same environment space. It seems to me that if this is what is happening.

• Problem with string writing series

  I'm using labview to send commands to a device using the serial port com1.  Using the example VI "Base series in reading and writing", I can communicate with my hardware very well, can write and can read.   the problem comes when I want to edit the VI by using my own string instead of the string provided in the example.  When I create a string constant with the exact text that was in the example string box, I can not write my material.

  I don't understand why this wont work.  Is there something special about the example of the VI text 'string to write' box that I don't know?

  Help, please

  Thank you

  I know what you mean and it does not work like that.  For some reason if I use a string with \r\n constant it still does not work.

  Anyway, I solved the problem in a roundabout way.  The command I sent you is a word but both parties; first part, second part number.  I want to create a loop when the number changes.  I was able to do this by combining three channels, the first is a copy of the example string, the middle is my number converted to string, the third is a different copy of the string of examples.  Now it works and I can with my life

• PROBLEM character string of ESC in a

  I can't send this message on the forum of the French comm...

  Hi all

  I (still) have a problem and I need a little help please.

  Plug-in a Heidenhain ND287 counter and having not found driver to use it, I have to create my own functions. One that allows to ask the measured value pose worries...

  USB communication.

  I send correctly the order and receives good response. However, this last has 'characters' escape (visible as a square from a string indicator) that I can't manage. Indeed, there may be 2 or 3 before the numeric value, and I need to isolate this last pour is able to be read (if I read 0).

  I tried various methods but without success...

  Has anyone an idea?

  Hello

  Thanks for the screenshot. Are you sure that the returned carractère is "ESC" with code 1 b? Maybe look at the hex code of the returned string and vevifiez that the first character has the code 1 b

  

  Pour do this, use the range of problems of function 'chain in byte array' functions: Programming::Numeric:Conversion and the 'number of hexadecimal string' function the functions palette: programming:tring:tring/number Conversion

  The actually if "character mystery has not pay code hexadecimal 0x1B, it is normal that it is not filtered."

  Kind regards

• Problem of String and Integer

  I create a button which when you click on a corresponding text of reference field in an existing text field. Here is the code:

  myVariable1 = "my text";

  myVariable2 = 'text ';

  for (i = 0; i < = 8; i ++) {}

  
  This ["circle" + i] .uniqueID = i;

  
  This ["circle" + i] .onRelease = function() {}
  
  test_str = myVariable + this.uniqueID

  
  };
  }

  If you click the button whenever circle1 myVariable1 needs to load in the text field Dynamics test_str. When you click circle2 myVariable2 should load and so on. The problem is that I get a is not a numeric response (NaN) in the text field. I know it has something to do with the combination of a string with a number, but can not solve this problem. I tried toString() and other pieces of code, but it does not work. Thanks in advance.

  Three things:

  1) there is a minor tangle of 'this' in the onRelease function.  Inside this function, 'this' refers to the object of the circle, but your variable lies outside in the main timeline, so...

  myTextField.text = _root ["myVariable" + String (this.uniqueID)];

  (2) your loop starts at 0, but your variables start at 1.  Don't forget to make them accept, otherwise your code looking for myVariable0 that is not

  (3) when you declare a variable, declare a variable...

  myVariable1 = work «»

  should be...

  var myVariable1 = work «;»

• Decimal display problem number ASCII

  Having a weird problem with a pilot Plug-and-Play for the Keysight/Agilent/HP 8510 C.    There is a driver of VI (joint) called «Output Active Marker.vi»

  The problem I have with this VI is that it works great my marker value between 9.9999 and - 9.9999.

  When marker value will between 99.999-to-10,000-10,000 - 99,999... VI does not move the decimal place on the DBL indicator.   For example: a reading of marker-15.347 display - 1.534

  Also, when a reading greater than 100 or less than-100 is dicplayed, it has the same problem with the decimal point.       Example:-104.56 bed - 1.04

  I have shot-up the word Agilent Key dictionary for this function (located here: http://www.keysight.com/upload/cmc_upload/All/08510-90280_8510KeyWords.pdf ) and it says that the output is an ASCII string, a undetermined DBL. (page 515 & 516)

  I tried to take the VISA Read and Write functions and output directly to the chain of output... reading but it has the same problem.

  "" So it seems that this function of reading VISA plays nice with the C. 8510 .oes someone has an idea of the way of "difficulty" it?

  Thanks for your help guys.    All I had to do was remove the bytes read-write thread, then the thread count to a constant 49 at the input to the function Read byte.   Works perfectly with no other required conversions.

  Anyone know who is the author of this Plug-and-Play driver?   This feature should probably be updated with these changes.

• Problem with string comparison

  I have a web service that I use two compares two strings, one from the service web xml of my application.

  XML retrieves a string when I compare it like this

  If (xmlVersion == 'true') {}

  }

  It never enter the if condition when I print the value I get from the service I think like this (real).

  So, what's the problem here?

  The way you wrote the comparison. you simply compare the addresses of the two strings.

  Try this instead:

  xmlVersion.equals ("true").

  In fact, you might want to consider getting these out to the back to avoid would be Null Pointer Exceptions, like this:

  If (true".equals (xmlVersion)) {" "}

  }

• Printing problems - number of copies squared

  We have two different computers with Windows 7 Pro.  One is 64-bit, 32-bit.  Both have problems with the number of copies being squared when print on some programs - the 64-bit HP printer, and Word is the program of boredom.  the 32-bit has a cannon, and Printshop 23.1 is the program of boredom.
  By checking on the web, it seems that this problem exists also in Vista and many other types of printers.  Help!

  Hello

  I'm happy to have helped. Sounds like you were doing a few very good troubleshooting.

  Please check that really helped as the answer so that others can find them.

  Move every day, go further

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Installation of Illustrator problem - number Unicode (Web Premium CS4; 10 64-bit Windows)

  I would be grateful for any answer you're my last hope...

  A few years ago, I bought Adobe Web Premium CS4. Earlier this year, I bought a new laptop with Windows 10 64-bit onboard. I installed CS4 - it took place without a hitch. Unfortunately, a few days ago, I had to have my reinstalled system. After the relocation and the update of my laptop, I tried again to install the Adobe software. This time, everything went well outside the Illustrator who can't run. My problem looks like the one described here: Adobe Illustrator Spanish version crashes or won't start or launch | Windows 8.1 -the difference is the language of my system is Polish. Whenever I try to launch the program, the system inform me that Illustrator is not compatible with my operating system and I should change the settings for programs that don't support Unicode. Of course, I tried to do this, but without success...

  I contacted Adobe experts, but they do not know the solution and they sent me here. Is it possible to solve my problem? If this isn't the case - download the English version of Illustrator? Although it is part of Web Premium, a consultant from Adobe suggested it would not work as I have for the Web Premium serial number not for Illustrator itself.

  Help, please! I seriously need Illustrator and cannot afford new version.

  Thanks again, Ned Murphy. The problem is that I bought a new laptop, because the former was far too slooooow for work with the most demanding programs (such as I, for example). Yet, I really appreciate your efforts to console me.

  Fortunately, I managed to find a solution. It's pretty simple - all I had to do was to change the settings for programs that do not support Unicode in the language of my operating system (in my case - Polish [sic!]). For all of you who are having the same problem - you can find this option in the control panel > regional and Language Options (in Windows 10 regions only) as described here: How to change the language for non-unicode programs settings in Win10?

  That's all. Everything works fine again - I can't believe :)

• Entry to the inputbox alignment problem number

  All,
  
  I have an inputbox bound to a Long field in the t. On the page when I enter the number, the entry is taken from the right side. How will we change it left for numbers like string.
  
  Thnks
  11.1.1.5 Jdev

  You can put

  text-align:left;
  

  in the property ContentStyle of the inputText component.

  Timo

• Problem with string to Long in Blackberry JDE and Eclipse w / Blackberry plugin

  I'm trying to convery a string to a long use in a persistent store.  I'm following the doc of Blackberry on the process.  When I type the chain and right click on "Convert String to Long" is gray in Eclipse and the BB JDE.

   applepie
  
    String key = new string ("applepie");
  
    String key = "applepie";
  

  those are the means I m try in both environments.

  What I am doing wrong?

  There must be something simple.

  I'm probably not see the forest because of the trees.

  You must select this channel.

  first select the channel using the mouse (as when we do to cut or copy)

  After that right-click on this channel.