Frame rates do not match the export

Similar Questions

• Why my sample rate does not match the output of timestamps in the waveform?

  Hello

  I run a simple application to read the data of two pressure sensors output signals 0 - 5V to a NI9215 module, and one connected to the 9237 module load cell. They are housed in the 9172 chassis.

  I am new to DAQ and labview, and I find it difficult to reconcile the sampling frequency that I put in the sample clock and the apparent rate data (according to the timestamps in the waveform that I output to a text file). For example, if I ask 100 Hz rate (and 10 samples to read), the data appear to sample at 1612,9 Hz. If I ask the sampling frequency of 1000 Hz, outgoing data is 1612,9 Hz to 20 kHz, the data came out to 25 kHz.

  Can someone tell me to trust the timestamps given in the waveform that is written in the text file, and if there is a way to check this?  If this timestamp is correct, how can I force the application of sample data at the requested speed?

  As a secondary issue, in my attached VI, you can see that I have an attached to an array of construction shift register. I can't understand how to initialize the array outside of the loop as it clears the table before the next time I run the program. Any advice?

  My VI is attached.

  Thank you

  Claire.

  Hi Marc, thanks for the quick response and the right explanation. It's all much more clear now.

  Have a great weekend,

  Claire.

• Signature App, number of Folios error does not match the main file Folio

  Hi all;

  I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.

  46386 codesign ERROR [main]. Signatory - failure during the signature

  java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio

  at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)

  at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)

  at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)

  at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)

  at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)

  at com.adobe.devtech.codesign.Signer.main(Signer.java:46)

  46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250

  I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.

  Any help or idea would be amazing. Thanks to you all.

  -mat

  I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.

  I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!

  -mat

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.

• Harger W530 AC does not match the Jack of the portable power

  I just got my new W530, but I can't load it. Looks like 170W AC/DC charger is just, but somehow the physical connector does not match the power supply of the portable computer. Charger AC/DC 170W is not circular but with two small rectangles, however W530 is completely circular. Someone had the same problem? I try to return W530 that looks like it was made of bad sense but takes to always come back. any recommendations? Technical service told me since it is within 21 days after the delivery, I better return.

  Technical service is great

  But after the sale to get back really really bad!

  It's quad-core, it requires 170W "brick" AC load, which has one taken not circular.

• the channel guide does not match the actual string

  the channel guide does not match the actual string that is to say PBS should be Channel 13 but is listed as channel 2 on the guide

  Hello James,.

  Welcome to the community of Sony.

  What is the model # of the TV?

  You can locate the model # of the TV from this link.

  You can try the steps mentioned on the underside of the base article of knowledge:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C408137

  Please mark it as "acceptable Solution" If you find this information useful.

  Kind regards

  Colby

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Certificate error "the name on the security certificate is invalid or does not match the site name.

  When my computer after starting the antivirus and Skype loaded,.

  I recently started to get warning of security box appear. The attachments show you what I see.

  I am told "the name on the security certificate is invalid or does not match the name of the site"

  Whether I click Yes to "do you want to proceed", nothing happens.

  How to make this security alert disappear from the start-up procedure?

  Thanks for your advice

  Marty783

  

  Thank you PML

  Problem is now solved.
  Was a corrupted version of IE6, which, when updated to IE8, fixed the problem.

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  =================================
  Try the following...

  View / Zoom... reduce the percentage

  The Zoom option can also be accessed from
  your at the bottom status bar.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk