Network expansion leads to erratic behavior

Similar Questions

• Erratic behavior of the keyboard of a Satellite R830

  I can't use my portatil to write because the keyboard has an erratic behavior. When you are writing it jumps to different positions on the line.

  No doubt, it can be solved install drivers again, but I'm not an expert, then someone can help with this.

  ARO

  Hello

  Disable Touchpad while writing and using the keyboard.
  I had the same problem in the past.
  Finally, I noticed that I touched the surface of touchpad accidentally while typing and this is the reason why the cursor jumped around.

• Re: Erratic behavior on Satellite M40X

  Hello

  Very often but not always, when I start the laptop (Satellite M40X - 186 Windows XP SP3), after a while, the Windows Media Player popup window. I got close but it reappears etc... also very often, there's erratic behavior: the keyboard is unusable or the letter etc. which appears on the screen is not bound to the key... or the cursor moves in an irrational way.
  I scanned all the files from virus (Avast tool) I reinstalled XP, updated the ATI driver... but this does not appear to have solved the problem.

  No idea what is the cause of this failure?
  Thanks if you can help

  When you start your laptop computer and enter the BIOS settings, you can use keyboard and go to settings?

• Erratic behavior CBWMS view code with code disappears

  This just started today: behavior seen very erratic code with the code disappears.

  As I am writing code, or by selecting the code, he suddenly disappears. Sometimes portions of code disappears and shows a small section that is stressed.

  If I select a photo in design mode, it can also disappear.

  I tried reinstalling Dreamweaver, deleted the Setup folder, preferences removed, but seems to come back.

  Has anyone seen this type of erratic behavior before?

  Here is an example of the strange underlined text (under 'c'):

  

  If I select an underlined letter and keep typing, it continues the line in mode code like this:

  

  Once this emphasis indicates somewhere, this is the beginning of other erratic behaviors such as images or code disappears suddenly, etc..

  It started to happen after upgrading creative cloud today.

  Try to turn off dictation & speech recognition in your system settings.

  Nancy O.

• Problem of AirPort Extreme with AirPort Express network expansion

  I have a dual-band Airport Extreme 802.11n that I bought in 2012 which is currently my home wireless network. I am trying to extend the network with a new AirPort Express with the AirPort 6.3.6 utility running OS 10.11 on an iMac. The Airport Express appears in the option other Wi - Fi devices. When I select it, AirPort utility tries to connect and then I get this message "an unexpected error has occurred. Try again. "Try again does not lead to a different result, and I can't seem to find useful information in the documents support or conversations. Any suggestions? Thank you!

  It should be easy enough to operate the express, but you must tell us all the info.

  Configure the Express in the same room as the extreme.

  Using wireless to expand? Then you simply plug power in the Express... and it should pretty much automatically connect to the extreme.

  If you want to extend through ethernet, you should connect the Express in the extreme and make sure that the configuration of the airport utility selects extend by wire.

  If the Mac does not work you have the iphone or ipad and use Airport utility for iOS... it tends to be more reliable.

  Still no luck does your Mac have port ethernet... in this case, you can plug it into the computer with ethernet and try again... more wireless implementation looks like sawing off the branch to that which you are sitting.

• Invited with 2 airports network expansion

  I have a Time Capsule 802.11ac (used a router with DHCP and NAT) and an extreme recently added as an extension of the network.

  I configured the extreme through the Airport utility to expand the networks via a connection time Capsule wireless net of ether. I have configured the router out of the box with the utility Airport a few weeks ago and everything seemed ok. When the update to Airport utility and Firmware was released this week I updated the two airports (now at 7.7.7) and Airport utility.

  Who broke the network extended comments. In my opinion, he was working before the update, but it was not much used. After the update, the primary network of comments Time Capsule airport operating normally as before. But when it connects to the network invited by the extreme mode bridge, my devices that all get a self assigned IP. Apparently, broken updates bypass DHCP.

  I have reset the extreme at the defaults and it reconfigured several times with Airport utility, but it still does not work.

  To summarize the network is Time Capsule (DHCP and NAT) with the network comments-> Extreme (bridge with network feedback mode) connected by ethernet. The main wireless network works on the two airports. The distance between the Airpotrts is 3 floors and about 60 feet, so that they do not interfere with each other and the networks may be extended wireless only via ethernet.

  Has anyone another considering also occur after the recent updates? Before?

  I contacted Apple support, and so far, they are puzzled. The technicians were not very familiar with the expansion of network of comments and intensified the issue to engineering. I believe that the recent update may have caused the problem, but not sure.

  I solved this problem. When you use Ethernet, you must have a direct Ethernet connection between airport expansion and airport router (no switch between the two). Now comments from both airports network functions.

• Erratic behavior of nod to the page

  When you scroll a PDF format article (updated to align with the page) is often some beavior erratic screen near the edge of the page. I hope that the behavior of the snap, but often the screen "wiggles" and changing position (only in the order of a few pixels) but obviously this isn't the desired behavior.

  This has something to do with what is discussed here?: http://forums.Adobe.com/message/4726426#4726426

  Mark Kunoff

  Information systems specialist

  Communications UI

  University of Indiana of public affairs and Government Relations

  It is a known problem in the v22 Viewer. It resolved in v23, with the case of the exception mentioned in the link above (a MSO is active when the user tries to scroll).

  Unless you have customized your own Adobe Content Viewer by using your Pro account or business, you will not see the fix until Apple approves the content viewer Adobe in the iTunes store.

  Neil

• Erratic behavior of the mouse on the Qosmio DX730

  I recently purchased a Qosmio DX730 and the wireless mouse behaves erratically. He jumps on the screen and is just about manageable for basic use, but practically useless for any detail as the manipulation of graphics work. This is no program related to special, it happens with all the software and windows desktop. Things I've tried but it does not solve the problem;
  1. the batteries and resynchronization would have changed
  2A spoke with toshiba helpline, uninstalled all the drivers and reinstalled
  3. search for updated drivers (no)
  4. tool Keyboard wireless, mouse and transceiver to the store and exchanged - go always the problem
  The wireless keyboard works fine

  I was wondering if I was getting some wireless interference but have disabled all devices electrical and electronic local = no difference. I am reluctant to give up everything and go to a plug in mouse because it's brand new. Any help appreciated.

  Hello

  You used the mouse WLan but have you tested the feature with a USB mouse?
  I recommend doing this to check if he s really a computer problem.

• After Windows Update, is now silent erratic speaker (flickers power button) and sometimes erratic behavior of the mouse

  I noticed a few days after the restart after an update of Windows (a few weeks of updates at the same time evidence) on my old laptop Dell M60 when I hit the mute button would begin just flashing power continuously, but there is ore that turned off.  I restarted and it has always given this behavior, so I turned off the laptop and decided to watch it later.  Today, I had a friend send me an email on their desktop PC indicating that they have the same problem.

  Does anyone else know this? Identified/fixed?

  Hello

  Download the latest sound/audio driver and if not more recent re - install the same. Please use the instruction manual
  as we explain.

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• cursor or erratic behavior

  while typing of e-mail or other documents, the cursor jumps to another location causing my typing be moved to another location. This change occurs without known reason and where it moves at random is

  You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Erratic behavior with puppets more complicated?

  Hi all

  Has anyone else experience some behaviors of random when you draw a puppet more complicated? I'm working now on one, it was looking and works very well, and then I moved an arm in illustrator. Returned to CA, and the Chief had jumped off in space.

  Character animator also appears, uncheck the box "Stand-alone Warp" whenever you update the puppet in illustrator, is there a way to keep? (Or I think better to use the '+' in the original?).

  Here's the head issue I mentioned:

  

  Thanks for the file. I was able to repro in Preview 1, but it moves is no longer the head in Preview 2. (You don't even need move a layer - just switch the visibility of a layer on or off always caused the problem before). Of course, it will always reset Warp independently and tie it to setting, so you'll always want to change the name of the head layer to:

  + head {attachTo = "Neck"}

• Erratic behavior of satellite L750 - 16Z DVD Drive

  The DVD drive for this model is HL-DT-ST DVDRAM GT30N.

  From a previous post, I was led to understand that it is normal that the reader to click on start. Once I've connected on W7 (after 2 minutes) it clicks again.

  If I go into the PC diagnostic tool, it will commit again.

  He also started clicking at random moments, which is very annoying.

  I think it has changed when I'm fiddling around with one of these TOSHIBA. I guess it could be either:

  Toshiba TEMPRO
  PC Diagnostic tool
  PC Health Monitor
  Service station

  This could really be something, but now it is so irritating that I disabled HL-DT-ST DVDRAM GT30N in devmgmt. I prefer to not do what I'm going to have to keep activation and deactivation.

  Experts out there who understand the strange operation of this configuration?

  null

  > If this is the case uncheck you the "Toshiba PC Health Monitor" to start msconfig work and is it safe to do?

  Yes, it's really safe!
  The "Toshiba PC Health Monitor" would not start when starting the device if you disable the "Toshiba PC Health Monitor" in the msconfig Startup tab.

  But this software can still be used if you need you can find the exe file in all programs-> Toshiba

• Erratic behavior of the mouse when you type text

  I have a Microsoft Usb mouse and when you type text, it sends all of a sudden the arrow toward the corner top or bottom of the screen. It stops also do something and you have to click back in your text before you can continue to write

  Is the most recent current/software-drivers installed from microsoft, version 8.0

  In addition, install the latest drivers for the youre MB chipset, which gains its mfg website (intel, amd, etc.).

  which has drivers software USB for pc MB... Once everything is up to date, open the device mgr, expand

  the tree, R.click the mouse on it, properties, Advanced tab, reset the sampling frequency & the entry stamp

  length of higher following setting, it becomes best answer to the computer, close when thru.

• The Windows 7 Explorer crashes on right-click of the mouse, frequent and erratic behavior.

  These two events are logged:

  The failing application name: Explorer.EXE, version: 6.1.7600.16404, time stamp: 0x4a765771
  The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5be02b
  Exception code: 0xc0000374
  Offset: 0x00000000000c6cd2
  ID of the process failed: 0xaa0
  Start time of application vulnerabilities: 0x01ca6d1cbd811ba4
  The failing application path: C:\Windows\Explorer.EXE
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 59239820-d913-11de-b63c-0018f3278051

  The failing application name: Explorer.EXE, version: 6.1.7600.16404, time stamp: 0x4a765771
  Name of the failed module: msvcrt.dll, version: 7.0.7600.16385, time stamp: 0x4a5bdfbe
  Exception code: 0xc000041d
  Offset: 0x000000000000117a
  ID of the process failed: 0xe44
  Start time of application vulnerabilities: 0x01ca6d2a66ddc14f
  The failing application path: C:\Windows\Explorer.EXE
  Path of the failing module: C:\Windows\system32\msvcrt.dll
  Report ID: aa2141dc-d91d-11de-b63c-0018f3278051

  You could start by uninstalling Bit Defender Total Security, if you have one. Frustration with malfunction of right-click, I did a clean and added hardware installation and software point by point. Right-click crashed the computer as soon as I updated Bit Defender 2010. The problem has disappeared as soon as I uninstalled Bit Defender and installed AVG. Checked with forum user Bit Defender and, Yes, they know the problem.

• FreeCell causes display erratic behavior

  I encounter the following problems on a Toshiba laptop, I7, Windows 7 Professional - 64-bit processor.

  I recently started having problems with the program Windows 7 Freecell.  When Irun the program screen will Flash at random intervals and the program does not work the mouse clicks as it should.  Sometimes I have to click several times on a map so he can choose the card.  The screen and mouse normally for all my other programs function.

  Anyone know why this is happening?

  Thank you

  Hi Greg,.

   

  Thanks for the quick response.

  You can try to use the resolution of the problems of display quality to automatically find and fix some common display problems.

  a. open the of display quality Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type Troubleshootingand then click Troubleshooting.

  (c) in the left pane, click show alland then click display quality.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also read this article for more help:

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.