Freeze after sleep

Similar Questions

• Keyboard and mouse USB freeze after sleep

  Hello

  every time my pc from sleep, I wake up the keyboard and mouse freeze and stop working. They only way to do their job is unpluging and pluging the usb cables. I use windows vista 64 - bit SP2, rx250 mouse logitech and microsoft keyboard comfort 2000. The drivers and software are later. (Downloaded from the site Web from Microsoft and Logitech).

  All the solutions for that?

  Thank you!

  Hey guys, I solved the problem with the mouse.  I have the keyboard and mouse plugged into the back.  Initially, I had the mouse and keyboard connected, in this configuration to include only the mouse was frozen.  I went there where their vertical connected to each other, that is to say the keyboard on top of the mouse on background.  that resolved the =)

• Thunderbird V38.2.0 crashes after SLEEP under WIN10 Home 64-bit

  The freeze after sleep 8 10 times while Thunderbird already worked very well. Also noticed a small empty Popup which may not be rejected. Must be completed via the Task Manager, restart OK.

  This is a known issue that gets attention.

  Alternative WORKAROUND: Until a permanent solution is made, I hope that in the next update, if you want to avoid the Thunderbird crash try setting to be disconnected before the sleep/hibernation file. Offline | Work offline. Then do the same again after the wake up the computer to put it online. Or, in the case where the only problem is Thunderbird not getting not new messages, do both after the wake up the computer.

• Illustrator freezes on sleep

  [Running on Mac OS X Yosemite]

  This post seems to have not been answered since 2011.

  Illustrator CS5.5 freeze after sleep

  I have the same problem, it started happening with CS5 when upgrading to the mavericks and now on Yosemite is the same.

  Every time I walk away from my computer for more than 5 or 10 minutes, I'll be back and Illustrator and Indesign have the spinning wheel of death. InDesign has fortunately recovering files, but I lost so much work illustrator.

  Today, it was even worse, I would like to switch between screens and back to illustrator and he would be frozen and I have to force it to quit.

  Is there a solution to this?

  purzeski,

  A comforter or blanket wool?

  Sorry, it was stronger than me.

  This update of the suitcase 5 Extensions, try:

  http://www.Extensis.com/support/product-support/Suitcase-Fusion-5/

  Link updated:

  http://bin.Extensis.com/SuitcaseFusion5-M-16-2-5.zip

  In any case, AutoSaviour can be your friend.

  http://www.astutegraphics.com/software/autosaviour/

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Satellite A65: Mouse freezes after the coming of sleep mode

  Hello!

  I'm having a problem with my laptop. I have the A65 with windows XP. The mouse works perfectly every time I close the lid of the computer goes into sleep mode that is ok, but when I open the cover from my session to resume the mouse is frozen. I can type and navigate with the keyboard mouse function but NNW.

  Someone at - it and an overview of this. Thank you

  Hello

  You mean USB mouse? What happens if you disconnect and reconnect the mouse to the USB port?
  You use the latest version of the BIOS? The A65 was designed for the American market, and you should check the Toshiba site us updates of BIOS. Maybe it helps

  By the way; Microsoft has published articles on the base of different useful knowledge about USB problems after sleep.
  Please check these docs and try the solutions:

  Keyboard USB or a USB mouse does not work when you wake your computer from mode ensures Windows XP
  Or
  After you resume your Windows XP computer using the power button, your USB mouse and USB keyboard may not work correctly

• browser crashes after sleep

  Hello

  FF 21.0 browser crashes after sleep.
  What would cause a 21.0 FF browser for freezes after the release of sleep?

  Thank you

  
  

• Satellite A200 - crashes after sleep

  Hi guys,.

  I have a little problem with my laptop to the end. For some reason, my laptop almost always (95% of the time) decided to freeze after I'm back on a sleep. After that I put the laptop to sleep and then turn it back on, the laptop will work fine for about 2-5 minutes before the processor stops to do anything (the processor light would be completely off).

  I tried to close all programs before I put it to sleep without success.

  Could there be a reason of this because after rebooting, my laptop would work fine, no blocking or crash at all, only after he falls asleep.

  Thanks for your time and help,
  skyryan

  Hey,.

  Before we start a long discussion about everything and nothing, this laptop you have exactly?

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Vista Home Premium 32 bit freezes after an indeterminate amount of inactivity

  For the last few weeks, my HP Pavilion dv6500 laptop has been freezing after periods of inactivity. Seems that the only change made to the computer until that moment was a Windows update that was late about 3 - 4 weeks. No other programs have been installed.

  I have not precisely timed duration yet, but I think 10-15 minutes of inactivity in freezing results. Little happens is important if the lid is open or closed. Only "a freeze" is to do a hard restart.

  I ran in Mode safe... same results. I did a system restore to a point before the update of Windows. I reinstalled the latest graphics and audio drivers. I ran SpyBot: Search and Destroy... we found an approximately 18 items requiring repair or removal, but it also has not fixed the problem. I ran Check Disk and the problem still persists.

  I'm running out of ideas, and this problem is driving me absolutely crazy. I hope someone can help before I lose my mind. Thanks in advance.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  Spybot is a fine program, however, it has two modes of residents who can cause problems with IE 8, Vista/Win7
  and other programs. In the settings of Spybot, I stopped TeaTimer - SpyBot - settings. And then start - type
  in the search box-> find Services at the top of list - just right-click on it - RUN AS ADMIN - look for SBSD security
  Change-double click on it - STOP Service Center, then MANUAL. Now you can run SpyBot as one
  scan on demand whenever you want. You will need to restart to stop TeaTimer to load again if it has been
  the before value.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Envy 17 3D freezes after activating the vitualization material

  After enabling hardware virtualization in the BIOS, my Envy 17 3D freezes trying to wake up after being in mode 'sleep'.  The hard disk starts and the keyboard lights up but nothing happens.  The screen stays black and the keyboard does not respond.  The only way out is a hard stop.    If I disable the hardware virtualization in the BIOS, everything is OK and the envy out of sleep normally.  This behavior is consistent and reproducible depending if the hardware virtualization is enabled or disabled.  Technical support said that there is a known issue of pro Win 7 and directed me to Google search for "Win 7 pro xp mode freezes from sleep mode.  These results do not seem to adapt to my situation.  If I am right in Win7 or xp mode without even installing xp mode, the computer crashes when hardware virtualization is enabled.  It is a new system with no other software installed.  This is actually my 2nd desire - the first was returned (by recommendation of tech support) for the same problem - they thought then it could be a hardware problem.  But now a 2nd one with the same problem?

  Any thoughts?  Suggestions?

  Anyone running with hardware virtualization enabled?

  Thank you

  Thank you for the ear!  Yes, the upgrade to e.16 solved the problem.  The laptop also has the problem of wifi, so I'll try this suggestion as well.  The final test is to see if I can up Hyper-V and running.

  It is amazing that I would have gone through a new series of sending the laptop for repair if it wasn't for this forum.  I spoke with my case manager, who said that the fix was not released until August 9, and that's why my laptop has not been successfully upgraded during its repair.  Lame!

  My sincere thanks to all who have posted!

• I have a mac with an SSD, it freezes after almost exactly 60 minutes

  I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference

  What specific model Mac?

  Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem

  http://www.CrystalIDEA.com/Macs-fan-control

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• Crash report after sleep screen

  Firefox will not start after sleep. All I get is the fault report screen. All right if I reboot my system. I have a screenshot of the error, if any. I also have a crash if necessary report.

  You are welcome