Freezes and page load partial safari 9.1.2
Recently, I have started doing all sorts of very long loading time and freezes on sites well established that I know are running. I'll sometimes get a partial page and need to 'X' stop and reload. Sometimes it just hangs there totally blank. My ISP speeds are 50MBPS + down.
I have tried to quit, restart and turn off all extensions. The option "reset Safari" old left and don't know what else to look at.
An example of an only partially loaded page is attached. This often happens now.
If Safari does not load a page or a page Web elements are missing
https://support.Apple.com/en-us/HT204098
If Safari is slow, unresponsive, which closes unexpectedly, or has other issues
https://support.Apple.com/en-us/HT203353
Tags: Mac OS & System Software
Similar Questions
-
When to make a selection on a Web site after clicking the left button, it takes about 30secs before the selection starts to load the loading bar only shows not even during this time firefox just hangs then it loads as usual
This has happened
Each time Firefox opened
== whenever I use firefox opera works very well done hated EI
Hello Mike.
Although that may not be related to your issue, I will remind you that the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.
As for your question, you may have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, make sure that it's not one of your modules installed, be it an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode , and then select disable all add-ons. If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme. You can troubleshoot plugins in the same way.
If you want supported for one of your modules, you will need to contact the author.
-
The page freezes and holding still to load...
My HP laptop (netbook) is on Vista and I use a dongle to access the internet but I am sick and tired of page freezes and ages of taking to load a page, is there any help for her
Hello
Check with HP and the manufacturer of your dongle as well as the internet provider.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=======================
Internet Explorer freezes or crashes
http://support.Microsoft.com/GP/ie_freezes_or_crashesTips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-ExplorerWhen you start Internet Explorer, it opens, flashes and then closes immediately
http://support.Microsoft.com/kb/967896------------------------------------------
Several troubleshooting methods:
What antivirus/antispyware/security products do you have on the machine? Be one you have
EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
may cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look
right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
ask about it here.Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpHow to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
http://www.Malwarebytes.org/products/malwarebytes_free--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> CMD
at the top of the list to search for CMD - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
When I load Illustrator CC 2015 the page says Initialising... and then the program freezes and will not open. I can only successfully open Illustrator once in each tent 4 or 5.
This drives me crazy, is anyone else having this problem or know a way to fix it?
Thank you
Liam
Hi Liam,
Please try following steps:
1. close the AI.
2. navigate to C:\Users\your username\AppData (hidden folder) \Roaming\Adobe\ Rename 'Adobe Illustrator 19 settings' folder 'old Adobe Illustrator 19 parameters.
3 re launch HAVE and check.
Thank you
OM
-
Whenever I'm searching on Google my mouse freezes and the tab has a loading sign.
Whenever I tried something on Google the mouse freezes and tab includes a loading sign, as the Web page still loads. I can only scroll upwards and downwards, so basically I can't click on links, zoom in or out, ect. I know it's a RC I write just a bug.
You have McAfee Site Advisor installed, which increases because of problems especially with Google. If you try to disable it to see if Firefox works. Alternatively, you can try to install the latest version (3.3.1) of the Site Advisor, one has to work.
Mozilla plan on blocking older versions of McAfee Site Advisor Firefox 4 due to the problems they cause.
-
Flash embedded in the page causes browser freeze and quicktime download prompt
Hi people,
This is the Web page in question: http://www.visionone.org.au/sonseekers/about_sonseekers.aspx (Please note this page has audio).
The problem is that the page - loading, causing the browser to freeze and a prompt box download quicktime to appear (even if sometimes it just seems like gray a box without text). The browser should then be closed via Ctrl + Alt + Delete function. The only way that I discovered it was a quicktime download prompt box, was that I opened the page in Chrome, I think, and he showed the text allowing me to perform the update. If this page works fine for me now.
This page was working fine until about 3 weeks - I didn't change anything on the page to make it all work differently. Other people have had the same problems, see this page - regardless of what browser they use. It is important that this page is viewable by all, without having them to go through the dramas of installation of a quicktime update thing (or whatever it is). The majority of people visiting this site is not web/computer savvy.
I think it might have to do with a security setting for Windows Update and the AC_RunActiveContent.js file that references the flash embedded in the page. I have been searching google for the past few hours and found nothing even remotely close to help solve this problem.
Someone at - it had a similar problem and found a solution? Or if someone has an idea how solve this problem, that would be much appreciated.
Thanks in advance.
Hello
The page does not freeze in firefox 3.62, but I got the guest of quicktime which is caused by the use of quicktime as the MP3 at the bottom of your code.
It has nothing to do with the AC_RunActiveContent.js file.
PZ
-
If I work online and leave for a few hours and then go back and go open a new tab or even reload an existing tab or go to a new Web site using an already open tab, the only thing I get is the "circle of rotation of the dead." Then I have to exit out of FF. Then when I go to reopen FF, I get a window that says that FF is always open, even if it's not and I want to stop it, so I click Yes. While I am able to open FF, but always get a message that says that my user profile could not be loaded properly, so I click on that and reopen again. Then it finally opens and I am able to work fairly well until the same problem recur.
I don't really know what has changed, but I never had this problem, I could let FF open days and come back and then open a new tab well and start working again.
Make sure that your Java (not JavaScript) is up to date
Check out Java and find obsolete Versions {web link}60 version update release date 8 August 18, 2015
Type of topic: addons< enter > in the address bar to open the Add-on Manager.
Access key; < Control >(Mac: < command >) < shift > has)On the left side of the page, select Plugins.
Make sure that the ones you want to use is on Ask or Allow.Go to the web page. Once the page loads, mouse to the address bar
and left click the icon. A window to display information of site should
developed. Select more information. Now select permissions. In the
menu, make sure that those you want to use is on Ask or Allow. -
Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:
- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
-
My Firefox cannot be used. It's very very slow edit pages, load pages and so on.
I have search and applied several suggestions found in Internet, but so far, no one solves the problem. Firefox uses a lot of memory (600,000) and lots of CPU (100%) and work very slow to load new pages or update pages loading.
I use APP "Memory Fox" but is the same.Hello VictorTrindade, please, try to reset firefox and see if that can solve the problem...
Please also make sure that firefox is not blocked by your security/firewall somehow software.
-
Initially Web pages load very slowly, but are a lot faster if I stop and reload the page
Whenever I have initially load ANY page of a Web site, the first page really takes a lot of time to load. All pages of this site is loading very quickly thereafter. I also noticed that if I stop the loading of the page, immediately after my first click and then click on reload, the page loads almost instantly. I am currently using Firefox 20.0.1, but this problem has occurred for a while... at least as far as Firefox 19. According to my research, I've tried a bunch of suggested solutions, but nothing helps... including: off hardware acceleration, don't select any proxy, disabled ABP, etc.. Any other suggestions would be greatly appreciated. Thank you!
Hello stw203, maybe try to reset all the related settings in your network configuration. enter Subject: config in the bar firefox address (confirm the message information where it appears) & are looking for any preference, starting with the network in bold (= set of users) - do a right click and put these entries to their default value.
-
I have problems loading of the huffingtonpost.es and sometimes .com on Safari on my mac and also in Firefox. But the web even chrome load perfectly.
It is the only web that I have problems up to now and is not a related problem of expansion because I don't have extensions in firefox and the same problem occurs there.
Does anyone have an idea of what's going on? It seems that something in relation to the css.
The really strange thing is... I try to load huffingtonpost.com on safari and do not load correctly, I reload and reload and does not load correctly. Then I load in loads of Chrome perfectly and after that I try to load in safari (or firefox again), then load it. :-/ This does not always happen, but then sometimes drive me crazy.
Thanks for any help in advance.
Make sure your OS X software is up-to-date.
Click on your Apple top left of your screen.
In the drop-down menu, click on: software update
That should launch the App Store.
If you see an update for OS X El Capitan and Safari, install these updates, restart your Mac and try Huffington Post on Safari and Firefox.
-
I am creating a wix site and there's always a page indicating my Safari software is not updated, but I have the latest version!
Better compatibility with Firefox or Chrome browser instead of Safari for Wix.
-
win xp install
Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX martyThank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty
-
I keep get redirected to google everytime I open facebook. who's who of the charges and allows me to connect, but once the page loads I get redirected to my homepage... can help all
Hi TonyHutton,
1. what browser you use on the computer?
2. did you of recent changes on the computer?
3. only happens with the facebook site?
4. do you have security software installed on the computer?
Check if the problem persists on all other sites as well.
See the link below and try them the steps mentioned, check if it helps.
Difficulty of your web browser hijacked
http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx
-
My Blackberry Smartphones BlackBerry keeps freezing on the loading page!
Hi, I had my blackberry for a few months and only recently has he is not able to go beyond the black screen with "blackberry" and the loading on it bar!
I tried to delete a contact from my bbm status thing and it just cut off! The gray loading bar constantly freezes three-quarters of the way along and does not move further.
I tried many things, but none have worked, I was wondering if anyone knows how to move and stop it to halfway along the bar of freezing?
Thank you very much.
Hi and welcome to the Forums!
Since you did not specify on what you have tried, we risk redundant advice. So, the first thing is... at all times a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
If it does not, then do it again, but leave the battery for at least 10 minutes. Makes no sense, I know... but sometimes it helps.
If who does not work, then please clarify exactly what you were doing... "remove someone from my bbm status thing and just cut" is not terribly useful for diagnosis... Please be as precise and detailed as you can be.
Best!
Maybe you are looking for
-
I can't access my notes my forgotten my passward who were really really important please help me to recover my old tickets?
-
Hi all I had initially followed this link to create the remote façade so that I could remotely control the VI. It had worked fine then and when I try the same thing today on the development of PC, it gives "access error - 404' and displays the docume
-
Rename the slider axis label in a XY graph
Hello I'm using Labview 8.2 and want to Relabel the axis of the cursor for a XY chart legend. Leticia cursor currently contains X (for the X axis) and Y (Y axis). I wish I could rename the labels for the x-axis and Y Leticia of slider to give the use
-
Is it possible, or we can save an entire page of a document as an image or a picture file?
-
Re-installing Linksys Connect on mobile after the new hard drive installed
I have a router E4200 and had loaded on my laptop Connect. My hard drive crashed and needs replacement. I have had no problem signing on my WiFi once I got the new installed hard drive. With the new hard drive, I now do not have Linksys Connect insta