Frequent BSoD - DRIVER_IRQL_NOT_LESS_OR_EQUAL

Similar Questions

• BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys)

  Hi, I am facing the problem of BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys on my laptop (HP ENVY 15-j126tx)

  OS: Windows 8.1

  Intel HD Graphics 4600 with the version of the driver 10.18.10.3277

  I try updating the driver, but the problem doesn't seem to be resolved. I also try to restore the pilot but after cancellation, I have been unable to adapt to my screen resolution and brightness (I'm not sure he always get BSOD DNon).

  What should I do to fix this?

  I hope that it was able to solve this problem with the resolution of the screen and able to adjust brightness.

  Thank you.

  Can be resolved by updating the driver manually by using the Device Manager.

• Satellite L30 - frequent BSoD after upgrade of RAM.

  This problem is almost identical to [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=144540𣒜], but given that the response was too general and did not help, I want to provide more details about my problem and hope for a better answer.

  My L35 (i.e. American L30) came with Vista Home Basic and only 512M of RAM. It was slow, but smooth otherwise. The problems started after I upgraded the RAM to 2 GB occasionally a BSoD will appear, and the computer restarts after a second or two.
  Most of the time, instances of BSoD are not taken at random; usually, it happens when you watch a film or multimedia and online during the wake her up after suspend.
  Also, it happens much more frequently if an external monitor is attached. He does, connect an external monitor and watch a movie will result in BSoD with 100% certainty. My laptop has shared video memory, maybe it's a question here.

  The problem prevailed after that I installed Windows 7.
  Memtest86 + showed no problems with my memory
  Memtest86 covers all aspects of the use of the RAM?

  Is it possible that some problems may be overlooked by memtest86?
  Are there other tests of memory, that I could use, specifically to test the shared video memory?

  Not every hardware problem can be detected software.
  You have tested the RAM with Memtest86 +? Try using Memtest86 (no +).

  In the worst case, you must replace the RAM. Ask the dealer for a new computer. I m sure they will help you.

• I can't update of Windows security because of an unknown error. Also, I get frequent BSODS.

  Good, so like I said, when I try to get the security updates, I get a message saying "year error occurred while of updates for your computer." Errors found: Code 80072EFE Windows Update encountered an unknown error. "Code 0 x 80244015 appears when I try the update of Defender.

  I've had this laptop (it's a Toshiba Satellite L305, is told by the way) gave me down and it has a number of problems. Another problem taxing enough, it's that I had frequent dumps. Some programs that I want to uninstall used to uninstall because the uninstall file does not exist. I installed a free Revo Uninstaller Pro trial and that helped, but I still don't know what causes the dumps.

  One of my recent problems with laptop computer is my computer crash dumps whenever I try to open Chrome now. It was working fine, then I would get BSOD as I just described, so I tried to uninstall it and then put it back, and it worked well again for the day, and then it happens again. I think it could be a virus. I also learned that it might be a registry error and I can change my registry, but I know almost nothing about computers, so maybe I need to walk through this.

  I have AVG and I used it to scan the computer and I also scanned with the Defender, and both programs have only seen adware. I don't really think that could do much harm. I'm not sure. Right now, it looks like a big mess of problems.

  I think I should also add that the laptop has no trackpad software installed, or at least that's what it looks like. The former owners told me that the trackpad has never worked. I don't know if that has anything to do with it.

  Any advice will help, please leave as much as possible.

  Thank you

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post the details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

  First to test we can the material.

   

  Standard hardware troubleshooting

   

  S.M.A.R.T

  Click Start - All Programs - Accessories - Right click Command Prmodel and choose run as administrator.

   

  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)

   

  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

   

  Run chkdsk

  In computer discs right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow

  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted. We may be able to copy it from another computer.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

   

  Analyze dump files

   

  If you want to analyze your own dump files. (C:\windows\Minidump).

  
  Download and install the debugging tools for Windows
  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363
  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu - symbol file path of the file and enter

   
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

  Close, and then reopen WinDbg. File menu - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. You must update the driver identified.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you have downloaded one of the Live applications or a website based Live
  e-mail, you already have access to your Skydrive account.

  Put your list of events in the Public folder and copy the link in the address bar.

• BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL with nvlddmkm.sys and ntoskrnl.exe

  Hey there,

  

  My computer has started planting since yesterday. I played a game for a while and it might or might not be related; Eitherway, it suddenly froze the system unexpectedly and I had to reset my pc. After that system started correctly. I ran the game again to see what's going on, and unfortunately, it crashed the system again; has had to reset hard once more. After that, I got a BSOD with DRIVER_IRQL_NOT_LESS_OR_EQUAL score to nvlddmkm.sys. I tried to reboot once more to see if it disappears and the system charged up to the floating logo of W7, but I only got a black screen afterwards, no login screen either. I wasn't able to boot the system normally more, forcing me to use safe mode. After checking terrils, I decided to uninstall completely nvidia drivers and that helped - loaded correctly and installed system software of windows default driver.

  Right now I'm in a situation where Windows seems to work stable unless I have try re-installing the drivers nvidia; In doing so, does not load results in a system and the BSOD screen again after W7 logo, no matter how many times I restart.

  My basic features are:

  Gigabyte P35-DS3R

  Intel Core 2 Quad Q6600 (2.40 ghz, oc'ed to stable 3.20 ghz)
  8 GB DDR2 RAM
  Gigabyte Geforce GTX460 1 GB of RAM

  Samsung 840 EVO 120 GB

  ST1000DM003-1SB10C 1 TB

  Silentium VERO L1 600W

  W7 Pro SP1 with all latest updates

  Here are the dumps (contains the dump of the first and the last being).

  So far what I've done - tried unplugging all devices (including my Sound Blaster Tactic 3D Sigma headset), uninstalled Avast antivirus, tried reinstalling drivers nvidia in two different ways (of unsuccessfully); clean the GPU/CPU/power supply. I'm slowly running out of ideas. To add, I never really had problems with my PC - it works all the time for 8-9 years with no issues whatsoever and I moved from c2d e6750 and GTS250 a year (or more) there are what I currently; never had any problems with these components, either. I always intend to Exchange my gpu for further testing, but since I do not have an integrated GPU and video signal passes through GTX460, I don't really know if there is a damaged graphics card (perhaps wrong, however).

  If anyone knows what is the origin of the problem and what can be done to avoid a full system reinstall, I would be really grateful for any help.

  Update:

  I swapped the GTX460 with my old GTS250 for test. Apparently, it seems that the GTX460 was damaged and all misleading BSOD was actually caused by defective behavior. Fix to 750ti in a while.

  Edit [21/05/2016]:

  I swapped to 750ti and all is well again. This case can be considered resolved.

• Frequent BSOD and PC freezes - Windows 7

  I have been faced with frequent BSOF and freezes for a few years now.  I reinstalled Windows 7 a couple of times. passed the ID of event several times. update BIOS and drivers hardware and program; and ran many tests, including hardware.   Windows and all programs are completely up to date.

  There is no particular model the breaks down: for some time the BSOD's happened only rarely (once a week or less) and the PC froze more frequently. Lately, the BSOD is back, more recently, several times a day.  In general, it occurs in the morning, the PC works well until the user logs out and logs in after awhile. the problem is repeated then - this was the case for weeks when the PC froze (no BSOD).  Now that the BSOD is more common, it can occur sequentially several times and then not happen for some time.

  I have read on this subject extensively and frequently performs WhoCrashed and WinDbg. I pulled out ready to be shared on SkyDrive MSInfo32 reports as well as the exported file.

  I am a very experienced user who can easily set up and adjust a PC without any difficulty, but I'm not a computer expert and have little equipment and system of profound knowledge. In the various reports, I was see a variety of driver issues, which some I fixed already (video ATI, Symantec), yet the new come (today, it seems, HP printer drivers).  For the most part, the following modules are involved: ntfs.sys, ntoskrnl.exe and ntkrnlmp.exe (and an 'unknown' module, too) by all that there are which is the source of the problems.

  Details of PC are:

  Name of the operating system Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  System manufacturer Dell Inc.
  Model Studio XPS 9100 system
  System Type x 64-based PC
  Processor Intel Core i7 CPU X 980 to 3.33 GHz, 3334 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date Dell Computer Corporation A04, 10/21/2010
  SMBIOS Version 2.6
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Physical memory (RAM) installed 12.0 GB
  12.0 GB total physical memory
  8.05 GB available physical memory
  43.2 GB total virtual memory
  40.0 GB available virtual memory

  This is a pretty powerful machine, but there is no acceleration or other extreme material uses.  It is gently used and is in ideal desktop (running low time, under the supervision of Core Temp).

  The programs are for the most part, the fair standard PC: MS Office 2010, Adobe CS5 Design, Norton Internet Security, EaseUS backup, software to print HP, iTunes, Roxio Easy CD, Firefox and more.  All are completely up to date.
    
  I am including below the exit of WhoCrashed and is happy to share the rest of the information in the hope that someone can help me solve the problem.

  Thank you very much!
  JF

  =========

  Thursday, December 12, 2013 12:41:43 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x1E (0xFFFFFFFFC000001D, 0xFFFFFA800D240000, 0xFFFFF80002EC1360, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, December 11, 2013 11:51:44 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\121113-29499-01.dmp
  This was probably caused by the following module: unknown_module_00000000'00000000.sys (Unloaded_Unknown_Module_00000000'00000000 + 0x31ABB8)
  Bugcheck code: 0x7F (0 x 8, 0 80050033, 0x6F8, 0xFFFFF88001435F2A)
  Error: UNEXPECTED_KERNEL_MODE_TRAP
  Bug control description: this bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: unknown_module_00000000'00000000.sys.
  Google search: unknown_module_00000000'00000000.sys UNEXPECTED_KERNEL_MODE_TRAP

  On Tuesday, December 10, 2013 10:17:45 this computer crashed
  crash dump file: C:\Windows\Minidump\121013-46145-01.dmp
  This was probably caused by the following module: symefa64.sys (SYMEFA64 + 0x48F6)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF880012868F6, 0xFFFFF8800AE6BA10, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  path: C:\Windows\system32\drivers\NISx64\1501000.012\SYMEFA64. SYS
  product: EPT
  company: Symantec Corporation
  Description: Symantec Extended File Attributes
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: symefa64.sys (Symantec Extended File attributes, Symantec Corporation).
  Google search: Symantec Corporation SYSTEM_SERVICE_EXCEPTION

  On Tuesday, December 10, 2013 18:49:46 this computer crashed
  crash dump file: C:\Windows\Minidump\121013-38625-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x745C)
  Bug check code: 0 x 116 (0xFFFFF8800B53E45C, 0xFFFFFA8011A4D010, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  On Tuesday, December 10, 2013 11:26:48 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\121013-40217-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0xE29A)
  Bugcheck code: 0xE3 (0xFFFFFA800CE76640, 0xFFFFFA800DE857F0, 0xFFFFFA800DE85730, 0x3)
  Error: RESOURCE_NOT_OWNED
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates that a thread attempted to release a resource, he was not the owner.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Sunday, December 8, 2013 2:55:44 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\120813-39639-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 4688)
  Verification of error code: 0 x 24 (0xFFFFF8800A7E89E8, 0xFFFFF8800A7E8220, 0x1904FB, 0xFFFFF88001467D9C)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, December 7, 2013 10:11:43 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\120713-41839-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFF80000003, 0xFFFFF8800BBF4210, 0 x 0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, November 27, 2013 2:19:37 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\112613-27440-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (18, 0 x 2, 0 x 0 x 0, 0xFFFFF80002EB78C7)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, November 16, 2013 3:28:52 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\111513-25708-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80003189E61, 0xFFFFF88004005AB0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Tuesday, October 1, 2013 11:06:55 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\100113-39936-01.dmp
  This was probably caused by the following module: acpi.sys (ACPI + 0x1D30F)
  Bugcheck code: 0xA5 (0x80000000, 0x1000, 0x0, 0x80000000)
  Error: ACPI_BIOS_ERROR
  file path: C:\Windows\system32\drivers\acpi.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: ACPI for NT driver
  Bug control description: this bug check indicates that the BIOS Advanced Configuration and Power Interface (ACPI) computer is not fully compliant with the ACPI specification.
  This is likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, August 27, 2013 4:21:11 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\082713-46769-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 148760)
  Bugcheck code: 0x7A (0xFFFFFFFFC0000185, 0x1A83D1860, 0xFFFFF6FC4000AC28, 0xFFFFF88001585760)
  Error: KERNEL_DATA_INPAGE_ERROR
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: this bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Conclusion
  12 dumps were found and analysed. 3 third-party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  atikmpag.sys (AMD several Miniport Driver, Advanced Micro Devices, Inc. vendors.)
  symefa64.sys (Symantec Extended File attributes, Symantec Corporation)
  unknown_module_00000000'00000000.sys

  [PLEASE NOTE: THE FIRST TWO, SUPRA, HAVE BEEN UPDATED AND REPORTED PROBLEMS HAVE NOT BEEN RETURNED SINCE.]

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the GENERAL WARNINGS for the failures of the system troubleshooting section for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  JF, what you call (connection, has not detected and having to re - connect) sounds exactly like what is the cause. Software imaging and backup are a big problem with external drives that are constantly removed then reconnected because the backup program has trouble communicating with the device when this happens constantly, probably corruption occurs.

  The only thing I can recommend is to remove all of your software backup and using outside on his own for a while. If you fall, you know it's the conflicted backup software once again and you have some shopping to do for a good backup software that will not cause problems.

  -#2001--MS antimalware - failed to update signature

  ^^ This happens sometimes, you have to just manually force updates by the client.

  -#11--disk - "the driver detected a controller on \Device\Harddisk3\DR11 error.

  ^^ Happens when you constantly connect and disconnect a device, even if it's to be ejected properly. Harddisk3\DR11 is probably your external.

  -#2--kernel - EventTracing - "Session"Circular kernel context Logger"was able to start with the following error: 0xC0000035.

  ^^ It may be a few causes, see this thread on technet for troubleshooting.

  -#41 (critical)-"the system has rebooted without stop properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.

  ^^, This was caused by the system of freezing rather than close properly.

  Kind regards

  Patrick

• Frequent BSOD - content of downloaded here Minidump. Help, please.

  I have a Pavilion dv6, it's about a year. As you will see, I get BSODS quite frequently.

  http://www.mediafire.com/?h76b8opn7xto13x

  Running Windows 7.

  Uninstall the current driver for Intel wireless.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver. If you have:

  • Windows 7 32 bit can get it from here
  • Windows 7 64 bit, can get it from here

• Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

  Hello

  for awhile, my laptop is a blue screen several times a week, e-mail: PAGE_FAULT_IN_NONPAGED_AREA.

  Past discharges according to the attachment.

  How to recover from this?

  Help, please.

  Thank you
  Alex

  I also have this error sometimes, all my BSOD can be found here - http://answers.microsoft.com/en-us/w...7866#LastReply

  Most of the drivers are probably obsolete and not for Windows 10... For example my BSOD is caused by AR8171 of Qualcomm Atheros driver...

  BUMP...

• Kernel_security_check_failure frequent bsod

  I get these all the time. Usually the start or stop. It sometimes takes 2 or 3 attempts before Windows starts, and I don't remember the last time I had a closed own. I think it has something to do with one of my external hard drives. I currently have a LaCie 1 TB and a 2 to Seagate. The LaCie currently has a single partition ExFAT, while the Seagate has 2 partitions HFS + and a NTFS. If I try to 'remove' LaCie, it works very well. If I try with the Seagate, he always says that the device is in use, and not to remove it. If I ignore the warning, I get a BSOD instant.

  I would like to blame the HFS drivers that apple provides for the reading of the OS X partition. They suck no doubt. My proof is that I wanted to keep the Seagate as a pure GPT drive, so I have set up with 3 partitions HFS + disk utility, but Windows won't format the third partition to NTFS until I disabled the HFS driver. I guess I could disable the drivers again for a few days and see if the BSOD happen again, but I would still be able to see all HFS partitions, so I'm posting here in the hope of some sort of solution. And I was wondering if anyone else has had problems using external hard drives with HFS partitions.

  sfc/scannow says everything is fine, and a virus scan found nothing.

  And why using a partition for Time Machine makes it unreadable under Windows?

  I disabled the HFS drivers, and the amount of BSOD has dropped dramatically. I'll leave this unresolved even if for now, because I want a solution that allows me to see my OS X partition and not yet constant BSOD.

• Frequent BSOD

  My computer is a 64-bit Windows 7 Home Premium.  Lately, I'm getting several BSOD per day.  I searched the forums on the Internet and have not found response.  This is the diagnosis that came:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               7f

  BCP1: 0000000000000008

  BCP2: 0000000080050031

  BCP3: 00000000000006F8

  BCP4: FFFFF80002CCAEFF

  OS version: 6_1_7600

  Service Pack: 0_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\022413-13572-01.dmp

  C:\Users\Jim\AppData\Local\Temp\WER-20670-0.SysData.XML

  Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  What does that mean?  How to solve this problem?  I would appreciate your help.  Thank you.

  Leukon777

  Hello

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.  Make sure that all the fans Act in your PC.

  If your PC is stable in safe mode after running it for a while, then you probably have a software driver problem.

  If your PC is not stable in safe mode, then the question could be a software or hardware.

  Boot into the bios and run a comprehensive set of hardware diagnostics several times until you are satisfied that you are satisfied with the results.

  View your results.

• BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL fzbomx.sys - impossible to find something about it!

  I got the BSOD for almost a year, or more, and he just started to stop automatically restart and enter the Startup Repair tool. I found a bit on the hand "Driver IRQL, etc." but absolutely nothing to the 'fzbomx.sys '. I searched my C: to it, but nothing comes. How can I solve this? I BlueScreenView but I don't know where to go from here - and it does not give me a place where the fzbomx.sys is.

  This happens often when I watch something on youtube, playing iTunes or scroll through photos on the internet. He also the bluescreened as soon as I opened Internet Explorer (I use Chrome).

  This is information is no on the blue screen:

  Technical information:

  STOP: 0X00000001 (0X00000002, 0XA6033000, 0 X 80711741)

  fzbomx.sys - address 80711741 base at 807D000, DateStamp 4cc6bfe8

  (32-bit processor)

  This isn't a well-known driver name.

  You can download Autoruns here: http://technet.microsoft.com/en-us/sysinternals/bb963902

  and check if it is listed in the section of the driver and other information.

  This could be a random name created by something like an antivirus program or malicious software.

  Try scanning using some of the free antivirus like Malwarebytes and SuperAntiSpyware.

  Search for rootkits with TDSSKiller http://support.kaspersky.com/viruses/solutions?qid=208280684

  Try a scan with Windows Defender offline offline http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Clean boot to see if you can isolate the component causing the crash:

  http://support.Microsoft.com/kb/929135

  If you can probably cause a crash with Internet Explorer, this could be an effective way to proceed.

  As a last resort, you can download the debugging tools for Windows from the Windows SDK to analyze dumps and see if you can find the underlying cause.

  http://www.Microsoft.com/downloads/dlx/en-us/listdetailsview.aspx?FamilyId=6b6c21d2-2006-4AFA-9702-529fa782d63b

• BSOD: DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1

  Hello
  I googled my problem and was told that it is a driver problem, so I updated the drivers for all my hardware, but I still get these errors after my PC plant.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  Stop: 0x000000D1 (0 X 0000000000000002, 0 X 00000000000000000000, 0x0000008006F004F0, 0XFFFFFA6009585231)

  WPN111vx.sys - address FFFFFA6009585321 base at FFFFFA60094E3000, DateStamp 488F1151

  My system is currently using:
  Motherboard: ASUS M3A78-EM
  OS: Vista Home Premium-64 bit with Service Pack 2
  Processor: AMD Phenom 9750 Quad-Core 2.40 GHz
  Memory: 4.00 GB
  Graphics: Nvidia 9600 GT
  Monitor: ACER AL1916W

  Any help you can give will be greatly appreciated. Thanks in advance.

  Hello

  WPN111vx.sys is a Netgear Wireless Driver. Go to Netgear and get the latest driver manually and use this
  method to install it. Not just to use updated drivers in Device Manager and do not use any scan for drivers
  Netgear - enter the information manually if you get the latest version of the driver.

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  ----------------------------------------

  If this does not prevent the bluescreens for this. Panel of configuration manager devices - network - click right on the
  Driver WiFi and turn OFF or power off and remove the removable if external WiFi device. Use a wire to
  your router if possible for this test, although what you need no network at all just to test.  Reboot to see if the
  bluescreens have disappeared.

  If disable/remove the WiFi device stops the bluescreens then you must contact the Netgear Support.

  NETGEAR - drivers
  http://KB.NETGEAR.com/app/products/list

  NETGEAR - Support
  http://KB.NETGEAR.com/app/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Frequent BSOD on Thinkpad X 1 carbon Win 7 X 64-IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NON_PAGED_AREA, ntoskrnl, SYSTEM_SERVICES_EXCEPTION

  Hello

  for a few days now, especially since December 12, as I remember, my computer breaks down very often with a wide variety of errors.

  Based on previous posts, I tried to update the drivers including video, Audio, USB etc., not much to do. Sometimes after those updates he initially refuses and BSOD while starting, at other times I can work for a short time before it crashes.

  "refuses to start" was caused by me running the Auditor, after an auditor/reset boots correctly to the login screen. I'll leave it there for a little while see if it crashes without even connect.

  I ran Memtest86 for a few cycles during the night without error, but the built-in diagnostics from the bios fail the test memory "random pattern" - now, I don't know whether or not the test is faulty.

  Displaying devices hidden in safe mode, I noticed that the 'security processor Loader' driver fails to load properly, Error Code 24. When start normally is not the case — is connected this safe mode?

  I downloaded the last minidumps on http://1drv.ms/1NBqxtC

  Based on the suggestions I ran sfc / scannow without the tool find anything.

  It would be great if one of you smart guys could help me, I'm stuck I'm afraid.

  Thank you very much!

  Stefan

  It seems to be a HD problem.  I would check this wiki for HD and run a file sytem check

  To test a suspect HD you must do 2 things described in this wiki
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-hardware/HD-checking-how-to-test-yours/588b34ee-211b-4747-9a92-ee106090cbbf?TM=1447383116605
  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the Desktop Window Manager program due to this error.

  Program: Desktop Window Manager
  File:

  The error value is listed in the additional data section.
  User action
  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.
  2. If the file is still not accessible and
  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.
  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.
  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.
  4. If the problem persists, restore the file from a backup copy.
  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data
  Error value: 00000000
  Disc type: 0

• BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys)

  Hello Microsoft community.

  Yesterday I installed Oracle VM and used for a short stint with no problem or what so ever, and all of a sudden today when my computer starts, I had this BSOD

  

  I have L17 no idea on what to do to solve this problem!

  Help: x

  They are related to your athrx.sys driver (atheros)

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Frequent BSOD PAGED_FAULT_IN_NONPAGED_AREA please help

  My PC blue screens in six minutes to start no matter what I'm doing and I can't put my finger on why. I put my dump file in a rar for you guys to take a look at, thank you very much!

  Link to download:

  http://www.speedyshare.com/WcUVP/minidump-file.rar

  Also as a note, I've already tried sfc/f/r and it has not fixed this issue.

  Let me know what I please!

  Hello

  Bugcheck 50, {fffff6fb40000000, 0, 0, 6}

  Could not read the name of the problem driver
  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'chain' + 32 d 48)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  1. check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and separate device drivers. See the updated driver below methods.

  BiosVersion = F.1C
  BiosReleaseDate = 06/07/2013
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP ENVY 17 Notebook PC
  Family = 103C_5335KV G = N L = CON B = HP S = ENV
  SystemVersion = 0884100000305B 00000620100
  SystemSKU = E0K90UA #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 1968
  BaseBoardVersion = Version KBC 93.34

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  2 check memory very carefully (see memory test methods below).

  3 use ALL methods in the troubleshooters below if necessary.

  4 if necessary execute DriverVerifier to see if it can indicate a CAUSE (see method DriverVerifier
  below).

  =========================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559023 (v = vs. 85) .aspx

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC (Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a USB Flash Drive recovery or other methods:

  How to create a recovery USB in Windows 8 & 8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  --------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">