Frequent BSOD PAGED_FAULT_IN_NONPAGED_AREA please help

My PC blue screens in six minutes to start no matter what I'm doing and I can't put my finger on why. I put my dump file in a rar for you guys to take a look at, thank you very much!

Link to download:

http://www.speedyshare.com/WcUVP/minidump-file.rar

Also as a note, I've already tried sfc/f/r and it has not fixed this issue.

Let me know what I please!

Hello

Bugcheck 50, {fffff6fb40000000, 0, 0, 6}

Could not read the name of the problem driver
Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'chain' + 32 d 48)

Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

1. check with HP Support, their drivers and documentation online and ask in their forums
on known problems. Updated BIOS, drivers of low level chipset and on-board major
and separate device drivers. See the updated driver below methods.

BiosVersion = F.1C
BiosReleaseDate = 06/07/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY 17 Notebook PC
Family = 103C_5335KV G = N L = CON B = HP S = ENV
SystemVersion = 0884100000305B 00000620100
SystemSKU = E0K90UA #ABA
BaseBoardManufacturer = Hewlett-Packard
BaseBoardProduct = 1968
BaseBoardVersion = Version KBC 93.34

HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

2 check memory very carefully (see memory test methods below).

3 use ALL methods in the troubleshooters below if necessary.

4 if necessary execute DriverVerifier to see if it can indicate a CAUSE (see method DriverVerifier
below).

=========================

In 'some' case will help this article.

Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286

Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
online systems), their resources and the drivers and ask in their forums (if any)
on known problems. Don't forget to update BIOS, drivers of low level chipset,
and the other pilots of major on-board and separate devices
. Those who alone can
set all or part of these issues.

Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.

Translate Windows 7 methods and use them on Windows 8/8.1

Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

--------------------------------------------------------------------------------------------------

BCCode: 50 0 x 00000050

References to Vista also apply to Windows 7.

Have you recently added any hardware? Have you updated a driver just before
These began? (Check control panel - updates of Windows to see if all drivers
have been updated it there all the time, it started) main likely culprits are video
pilot, other great drivers, memory and antivirus/antispyware/security products
could be faulty as well as reader questions.

Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA<-- read="" this="">
http://msdn.Microsoft.com/en-us/library/ff559023 (v = vs. 85) .aspx

BCCode: 50 0 x 00000050<-- read="" this="">
* 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

=========================================

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

========================================================

Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).

How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

If you need a USB Flash Drive recovery or other methods:

How to create a recovery USB in Windows 8 & 8.1

http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

--------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • BSOD! Please Help, product number HP Pavilion LK237AV

    HP Pavilion DV6 - LK237AV product number

    Win7 Home Premium 65-Bit

    Just recovered

    BSOD 2 months after unpacking box, to present.

    Please help me with this HUGE! problem, I already try all possible solutions to this problem, but nothing works.

    The BSOD is completely random.

    Here is the link to download a Zip file with the files of my problem minidumps.

    http://www.mediafire.com/?8twaz7x23dtp1zw

    If anyone can help me, I will be grateful.

    Thank you very much for your great help!

    PD: Sorry for my bad English.

    Hello

    Uninstall the current driver for the Broadcom wireless card.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    When you do this, you can test the RAM and HARD drive.

    In the link below, you will find all the details of how you can do this:
    How to test the RAM and HARD drive (HDD).

    PS.

    Latest BSOD was caused by Norton Internet Security, but for now I don't want to do something, because this situation happened only once. Because of course, it is recommended to check there at - it an update for this software.

  • ERR_GFX_D3D_INIT BSOD 0x0000003B please help us

    This problem occurs only with a single match. GTAV

    A lot of people have this problem and it doesn't seem to be a solution.

    We had many patches to the game and many driver updates.

    The problem persists over many different hardware configurations.

    AMD processors

    Intel processors

    NVIDIA GPU

    AMD graphics processors

    What we all have in common is the error code.

    Initialization failed. Please restart and restart the game. Try to reinstall the game, if this persists.

    Followed by this BSOD:
    A problem has been detected and windows has shut down to prevent damage to your computer.
    SYSTEM_SERVICE_EXCEPTION
    ETC.

    Technical information:
    STOP: 0X0000003B (0X00000000C0000005, 0 X 0000000000000000, 0XFFFFF88013E06969, 0 X 0000000000000000)

    https://support.RockstarGames.com/HC/communities/public/questions/203458477-Err-GFX-D3D-init-crash-BSOD

    Thank you!

    We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here
    If you have any questions regarding the procedure, please ask
  • Random & sometimes return BSOD is please help

    Hi all

    Recently I had recurring problems with my 4-5 + years, Compaq Presario CQ60-417DX running Windows Vista Home Premium 32-bit. I received several bsod, and the majority of them are DRIVER_CORRUPTED_EXPOOL bugs. I don't know what is the cause but I did tests of hard drive, memory, and several times startup repair. The tests come back fine Startup Repair has fixed the temproarily only problem and then come back the BSOD. Any suggestions?
    Kind regards
    Brenden

    Hello

    Welcome to the community Microsoft and thanks for posting the question.

    According the description, you get BSOD in Vista-based computer.

    1A what situation do you get BSOD? That you get when you work on a particular application/operation or it occurs randomly?

    2. don't you make recent changes that caused the problem?

    3. do you have external devices attached to the computer?

    4. What are the error numbers, see the BSOD screen?

    See the link below for trouble below to resolve blue screen issues:

    Method 1)

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

    Note: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

    Method 2) run Microsoft Safety Scanner to check any Virus infection:

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    Click the link below to provide newspapers at the time when the computer crashed:

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

    Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

  • T430s - BSOD (of driver power state failure). Please help identify the driver

    I meet regularly with BSOD on my T430s / Win7 when switching mode standby (Fn + F4). The error message is driver_power_state_failure. This happens almost every day. Driving me crazy!

    I know it's a common problem (I also had with a former T500, but not on T420). After Googling around, I discovered WinDBG and how to identify the faulty driver that is causing the problem.

    However, I could not install the tool - or debuggers package (referenced on windbg.org), nor the tool set + a .NET framework from the Microsoft Web site. The old guard quit the installer with no message (although the Remove Programs dialog shows the thing installed, it seems to be no program to run), the latter does install without no diagnosis (installation only, tried the debugging tools tried to install the complete package - same result).

    So, can someone please help to analyze the memory dump and to identify the faulty driver? What file is needed for this - the memory full image (from folder/Windows /, ~ 500 MB in size) or the minidump file (from/Windows Minidump file / / /, ~ 700 KB in size)? Or both?

    Help a fellow fan of ThinkPad enjoy his work tool

    Several days after, I don't get BSOD more, even though I kept pushing the laptop "standby mode" on a regular basis, with or without food. Since already BSOD passed almost every day (to, like, try every 3rd or 4th go to sleep) and now there is none, I would try and call this problem is "solved".

    Let's see if just once he returns

    I'm not really sure what has helped exactly - I've only updated (a little) drivers manually (after Lenovo update system running with only a few boxes checked). These pilots were audio, video and network ones. USB 3.0 driver has been updated before, but that alone did not effect.

    I've also updated the BIOS via the Lenovo system update (strange, but it worked, unlike my manual attempt via downdloading non-bootable-CD version of the Lenovo Web site).

    Hope this helps other people are having the same problem.

  • 0x000000ce BSoD - please help!

    "STOP 0x000000ce DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION" the BSoD arose three times in the last two weeks on my laptop. Everything started after I installed Kaspersky software (and I have to remove Norton/Symantec/and any other virus removal software to do this). I read that Symantec device drivers have been known to cause a BSoD. Any help to fix this pain in the * would be much appreciated!

    Hi Anna,.

    Let us work together to solve this problem.

    Please answer these questions:

    1. you installed hardware drivers recently?

    2 any special request triggers the Blue Screen of Death?

    This stop message occurs when you install a faulty device driver or system service, the pilot could not cancel pending operations before returning.

    I ask you to follow the steps in the following link:

    How to fix Stop error on a blue screen
    http://support.Microsoft.com/kb/958233

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

    Note: it is recommended to backup your data to be on the safer side.

    Please send us so minidump files. The dump files are her mini at the C:/Windows/Minidump.

    Please let us know the status of the issue.

  • Please help me solve this BSOD ntoskrnl.exe, ntkrnlmp.exe

    Hello

    I have problems with my new computer since I bought it, it started giving problems. Now this BSOD. I am totally frustrated with it. Please help me get rid of this questions.
    Here is the link of the minidump file:
    https://SkyDrive.live.com/redir?RESID=1F218460C89B0917%21114
    I guess that the culprit is wireless driver. With the old version of the wireless driver, I got another BSOD, so I uninstalled and installed the most recent version. Still problem persists.
    With whoCrashed, I found this information:
    Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
    Windows dir: C:\Windows
    CPU: GenuineIntel Intel (r) Core i7-3610QM CPU @ 2.30 GHz Intel586, level: 6
    8 logical processors, active mask: 255
    RAM: 8469991424 total
    VM: 2147352576, free: 1902690304

    Crash Dump Analysis
    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Tuesday, December 23, 13 9:36:04 CEST your computer crashed
    crash dump file: C:\Windows\Minidump\122313-27736-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 72680)
    Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
    Error: DRIVER_POWER_STATE_FAILURE
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Tuesday, December 23, 13 9:36:04 CEST your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
    Bugcheck code: 0x9F (0x3, 0xFFFFFA8007539060, 0xFFFFF80000B9C3D8, 0xFFFFFA800FE606B0)
    Error: DRIVER_POWER_STATE_FAILURE
    Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Please help me. Thanks in advance.

    Apvmz

    This phenomenon was related to the device driver wireless Extensible athrx.sys of Atheros Communications, Inc.  Yours is almost 2 years so not the most recent.

    I would like to re - install the latest driver available

  • Frequent BSoD - DRIVER_IRQL_NOT_LESS_OR_EQUAL

    Recently, I met with frequent blue screens with my PC and still receive the same error code "DRIVER_IRQL_NOT_LESS_OR_EQUAL" and have no idea as to what is wrong and how I can try to solve this problem. Below, I have included a summary of the collected from reviews BlueScreen BSoD. Any help would be appreciated.

    ==================================================
    Dump file: 022215-29530 - 01.dmp
    Crash time: 22/02/2015-16:35:36
    Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x000000d1
    Parameter 1: 00000001'00000000
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000000
    Parameter 4: fffff880'056ec1f4
    Caused by the driver: ntoskrnl.exe
    Caused by the address: ntoskrnl.exe + 74ec0
    File description: NT kernel & system
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.18717 (win7sp1_gdr.150113 - 1808)
    CPU: x 64
    Plant address: ntoskrnl.exe + 74ec0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\022215-29530-01.dmp
    Number of processors: 4
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 262 144
    Dump of file time: 22/02/2015-16:36:40
    ==================================================

    Daniel

    Auditor to find 2.  At the same time easy to fix.  First a file called asacpi.sys which is a great cause of BSOD in the 2005 version (your own).  You must update to 2009 or newer.

    Second see found the file that crashes is relative to avgmfx64.sys AVI Loader driver for AVG Technologies CZ, s.r.o..

    I delete avg and use MSE in its place.

    Pre 2009 this driver version is a known cause of BSOD.

    Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
    http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

    Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
    Download and install it.

    Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here
    AVG can be a cause of BSOD.

    Please delete and replace by Microsoft Security Essentials at least to the test
     
  • PC automatically shutsdown after every 30 min. I have the last MS Security Essentials installed and running and also the MS Malicious software installed, but none are able to detect any virus or harmful software. Please help in this regard.

    PC automatically shutsdown after every 30 min.  I have the last MS Security Essentials installed and running and also the MS Malicious software installed, but none are able to detect any virus or harmful software.  Please help in this regard.

    You get a bsod?

    Please check the event log to see if there are errors, helping to explain what is happening. Also check the c:\windows\minidump folder. Are there files .dmp created here with the dates that it closed? If so please download them on your skydrive so watch us closer.

    See you soon.

    MyPcHealth - free tools

  • Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

    Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way? Keep in mind
    This associated heat does not always mean too much heat as it is often a part or a component
    who is too sensitive to normal levels even heat.

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    Check with these utilities to see if information may be collected: run BlueScreenView
    to see if there were any BlueScreens and verify in MyEventViewer at shutdown
    (or a few seconds before) See the event log contains useful information.

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
    or time of the BSOD or event to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it a bit before and after the time of the event or BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
    application of all accidents occurred in your system. The information breaks down is extracted from the
    .WER files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How burn and sync songs froman MP3 CD? Impossible to do it please help?

    I have MP3 CD, and im tying to burn songs on my computer, so that I can upload them to my phone and I need to know what is gong on and why it does not work. Please help me to me and guid hollow please.  I would really, really appreciate it.

    Thank you

    Hi zu2002,

    You use Windows Media Player to connect the phone and transfer the songs to it?

    Do you use third party software to transfer songs to the phone?

    You won't be able to burn the MP3 of the songs from the CD to the computer, you must copy in the music library or RIP to the computer. You may need to MP3CDs rip songs to your computer and then try to sync your phone to the Media player and transfer music to the phone.

    You can see the following link for more information:

    http://www.Microsoft.com/windows/windowsmedia/player/11/everywhere.aspx

    http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

    http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

    You can consult the following links for more information about synchronization with Windows Media Player:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

    Hope this information is useful.

    Jeremy K

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My computer freezes please help me

    My computer hangs at random crashing. He just started to happen randomly. The screen goes black, but his continuous for stutters a little then the last thing before that everything shuts off and restarts my computer. No error message appears and I can't find anything in the event viewer that would lead to a crash. I build the computer about a month ago and it has never had a problem like this before. I tried making sure the RAM and video card are not dusty. The CPU does not overheat. I updated the drivers for my card graphics and motherboard. I also scanned for viruses in safe mode, but I still don't know the cause is. Please help me.

    "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

    Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

    As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
    If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

    If playing with video driver versions did not help, make sure that the box is not overheated.
    Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
    Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

    If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

    I download cpu - z and gpu - z (both free) and keep an eye on the video time

  • Blue screen issue whenever I use the Torrent Client Please Help!

    Hello...

    Everything was ok, all of a sudden, I continue to receive the Bluescreens he said netio.sys caused the Bsod!...
    It occurs only when I try to use the Torrent Client (Utorrent, Bittorrent).
    I tried to update the network drivers, but could not find new ones on the dell support Web page.
    Please help me solve the problem.
    Run Dell Inspirion 15r N5110
    Intel i5 processor
    4 GB Ram DDR3
    GPU NVIDIA 525 m

    Update : I was surfing for some corrections. I came across this link (http://www.troublefixers.com/utorrent-crashes-windows-7-with-blue-screen-of-death/)

    I asked he'll keep this post updated.
    UPDATE 2 : link above the fixed Solution! : D

    Steps to disable Teredo

    Step 1: On the start menu, search cmd, Windows locate the cmd.exe which is the prompt, right click above and clock on run as administrator.

    Step 2: On the command prompt, type the following command and press enter

    netsh interface set disabled state Teredo

    This is it, its done. Hope you find the above easy to follow trick.

  • Please help with my error blue screen error checking was: 0x0000000a

    Hello

    Periodically, I get a BSOD in my computer Windows 7 Professional. This happens all the time, but usually shortly after startup or when the computer has been idle for a while. I saw a lot of people talk about problems of memory. Maybe it's my case but I ran Windows Memory control and also MEMTEST86, and no error occurs. I hope someone can help me refine my problem it is a problem of driver or compatibility of memory itself. This has happened for some time, but since I do not use this computer that I often put off fixing.

    I mounted this computer myself:
    Card mother Gigabyte GA-MA785GM-US2H version 1.1
    AMD Phenom II X processor 3 720
    Crusial 4 GB memory DDR2 800 Balistix

    I would like to know if there is any other information system, that I can provide. Here are 3 recent mistakes that I received last week.
    20/11/12
    Description
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000000a (0 x 0000000000000000, 0 x 0000000000000002, 0 x 0000000000000001, 0xfffff80002f13351). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 112012-24429-01.

    17/11/12
    Description
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa80036b85f0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 111712-21325-01.

    13/11/12
    Description
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa80036b85f0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 111312-16473-01.

    I also downloaded the files of 3 dump for these errors to skydrive.
    https://SkyDrive.live.com/redir?RESID=3D05BF23C2746C26! 116

    Please help me solve this problem. Thank you in advance for any help you can give. And let me know any other information I can provide.

    Peter

    Well Yes, 2 sticks remove 1 try each slot. If theres only 2 slots. See what stick breaks down in any location

    If the 1 stick is not crash after so long (depending on how long it takes to plant it now).  Remove it, put it in the other location. Do the same thing.

    If a stick plant in 2 or all slot machines, do the same for the 2nd round

  • on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

    on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

    Hi kuentin,.

    Welcome to the Microsoft Answers site!

    (1) - what do you mean you have only 1 user account?

    When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

    There is no way that you can create an administrator account, or by using a Standard account.

    (2) are you having issues during installation of the software or opening it?

    (3) what exactly happens when you try to open the software application?

    (4) should be codes error or error messages, if any?

    (5) what software are you trying to install or open?

    I suggest you go to the link below and read for more information on user accounts.

    http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

    Get back to us with more information and try out us and help you better with the same.

    Concerning
    Varun j: Microsoft Support
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • 12.4.1.6 iTunes installation updated on Windows 7, 64-bit

    I currently have iTunes version 12.3.2.35 installed on my 64 bit Windows 7 computer. I did get invited to install an update, lately for 12.4.1.6 version, but the keeps installation program fails with a message about a mysterious missing program. "The

  • Satellite L20-155 BIOS restore

    The BIOS on my laptop seems to be corrupted. I checked section Service and support but my (Dutch) is no longer on the current list.Download laptop L20 refer to different models than my - 155. Who can help me with a proper BIOS of restoring files, or

  • Satellite Pro A120-106: what type of screen?

    HelloI intend to buy a new notebook, exactly Satellite PRO A120-106 and I found different information on the websites of the shop on display. Do you know what type of display is used in this model, TN or * GOING? Thank you

  • Sony Handycam movie player Codec problem

    Please help me - I am trying to download my Sony handycam to movie maker but repeat me this for the video (but pictures download very well!) "The file E:\MP_ROOT\101PNV01\M2U00005. MPG cannot be imported because the codec required to play the file is

  • How to remove vista anti-spyware, without having to pay for other software?

    I have mcaffee and is not getting rid of this vista antispyware *. and I don't want to buy more software then if theres another way out let me know TKS.