FRM-93652: runtime process ended abnormally

Similar Questions

• error merging of forms/States FRM - 93652 Oracle 11 GR 2 component report

  Hi all

  recently the program install weblogic 10.3.6 and installed Oracle 11 g 2 forms and reports.  I have my forms upwards and running, essentially without problems, however, when I call a report of my forms, I get FRM-93652: the runtime process is completed abnormally.

  I made no changes to the reports configurations after installation.

  I put all my. RDF files in a directory in the directory "Oracle_FRHome1/middleware/forms.

  I'm migrating from oracle developer suite 10 g where everything works fine.  in the form, I created a report and a program unit that sets up the URL.  Not sure right now if this is changed to, I'm the report server is not = 'REP1', but in Oracle 11 g I don't know how to find out what is the value to pass.

  Help, please.

  Sincerely,

  Steven

  
  

  Thank you for all the suggestions.  I rebooted weblogic and oracle 11g Forms/States in "production" mode, everything works now.

  Sincerely,

  Steven

• FRM-93652: WebUtil on Form Builder 11 GR 2

  Hello

  
  

  I'm trying to start WebUtil on Forms 11 g Builder:
  

  • Windows 7 [64 Bit]
  • Forms [64 Bit] Version 11.1.2.2.0 (Production)
  • Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production
  • Chrome browser Version 40.0.2214.28 beta-m [64-Bit]
  • 1.8.0_25 Java [64-Bit]
  • Jacob.jar signed to a trusted certification authority,

  After the two alerts (jacob & Oracle) Java startup process breaks and I get error FRM-93652.

  The WebUtil works with the start of the run: http://win-myserver:7001/forms/frmservlet? config = webutil & form = webutil_demo & userid=webutil/Webutil@orcl ,.

  the WEBUTILCONF_MV.fmb runs from the form designer and checks with error 0.

  I have no idea to solve this problem, please help.

  Thank you

  Friedhold

  Hi Friedhold,

  FRM-93652 is a very generic error which may be due to a number of reasons. Although it seems that the form of webutil_demo works perfectly, I recommend you check your WebUtil environment. The following article provides a list of good for WebUtil environment: http://pitss.com/us/2014/03/20/forms-and-reports-11g-environment-requirements-for-webutil/

  After that everything is convinced, try to run your application again. As you use config = webutil trying webutil_demo, which config parameter form you use in the URL when you run your application? If you use no config = webutil, you must update your config section in formsweb.cfg to contain required parameters for WebUtil (see section 3 in the above URL explaining what needs to be configured).

  In addition, if you run a form that doesn't use WebUtil (Oracle test form test.fmx for example), you encounter the same error?

  Thank you

  Scott

• LOGFF triger does not run when customers end abnormally

  Here's a triger to logoff:
  
  create or replace TRIGGER scott.before_logoff_trg
  before logoff ON database
  declare
  ......
  
  If customers come out normally, it is executed (just delete some rows in a table). But if the customers is crushed, the triger will not run.
  
  Is there a way I can run code pl/sql, when a client log normal or abnormal?

  BluShadow wrote:

  EdStevens wrote:

  Antares wrote:
  Thanks for your response!

  I'm working on an application for the edition of map of GIS, which should allow several users to edit the same map. Client A and B change the different parts of the map, but that they would like to see the result of the other. Change operations are stored which will be inserted in the staging table. When a customer edit, he must choose to save or ignore for this time editing operations. If he has abandon the changes, it has no impact on others, because these changes are useful for others, but not very important.

  No effect? Unless Customer B made a decision based on what he saw of A, make a change based on what he saw of A, so he saw has went, destroy the basis of its decision and action...

  Well Yes, as I said above...

  Which suggests that client B can act on something that is not yet truly engaged in the process of the company. This sounds like a serious gap in the business process and therefore the database design.

  Yes, it seems that the question should the cropping - how to allow collaborative editing of GIS data within maps that allows changes to be resistant and modified before to be published?

  This sounds like the O/P is in need of a kind of shared workspace that can be superimposed on an existing map changes without making public changes. The workspace must be shared between multiple users at the same time. Turns in the workspace would be committed and those changes, once accepted (and closed maybe?) must be published in the underlying plan so that everyone can see. If they are not published, they remain in the workspace.

  The idea of catering to an abnormal termination seems largely unnecessary if there is a concept of workspace. If a user ends abnormally, when they reconnect, they may choose to reuse the existing workspace or create a new. The old workspaces that have not been touched for x time could be archived or purged.

  This does not seem withdrawn too far from what the op said here...

  Change operations are stored which will be inserted in the intermediate table

  He thinks that it is mainly a question of changing the process...

  Published by: Bravid on March 7, 2012 15:49

• I want to run ams 4.3 on my laptop and it says end abnormal program, what could be the cause

  After you have installed ams.4.3 on my laptop if I want to run it, it says end abnormal program, what could be the cause

  Hello

  1. what operating system do you use?
  2. have you checked if this program is compatible with your operating system?
  3. What is the full and exact error message?

  Please answer these questions that might help us helping you better. If you use windows 7 or vista you can try to install this program in compatibility mode and check.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

• process ended unexpectedly

  try to install windows SP3 for XP Home, tried to install via windows update and installation by the network, the installation gets near the end where is starts updating the registry, she leaves installation gets this error message every time the process ended unexpectedly then it goes through the restore process canceling changes

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP3?

  A Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  How to troubleshoot a failed installation of WinXP SP3
  http://support.Microsoft.com/kb/950718

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost you 59 US$ per incident now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• NI USB box problem when Labview ends abnormally

  Hi all

  recently, I had a problem with the NI USB box used in Labview.

  I wrote a very simple program and it runs in Labview 2011. Basically, it reads data from a NI USB box and also send data back. According to my knowledge (I don't know if it's good or bad), when the Labview is arrested shortly how it is completed, the USB box should also stop working. But the thing is, when the Labview program ends abnormally, let's say I directly terminate from the windows task manager when it is running, all the ports of the box USB will hold their final statements until I restart Labview and write new values to them.

  This could be very dangerous. For example, when I use the USB box to control the power of a power supply, the Labview program crashes (which happens often), the power supply box and USB power will continue to work until I restart the program again. I tried several different types of boxes NI USB on PC and the problem still occurred. So I was wondering if there is no mechanism that prevents such problems or if I can do something programmatically to avoid it.

  I thank very you much for your help and your time.

  Best regards

  Sun

  Sun,

  Another area where you can have a misconception: LabVIEW is not control USB DAQ device. The LabVIEW program called the DAQ driver program (typically DAQmx or DAQmx Base) and pilots say the OS to send messages via the USB port of the DAQ hardware. So stop the program LV, intentionally or accidentally, does not say the data acquisition driver and the OS USB driver to put the DAQ hardware in a State course.

  If you have a configuration where the LV program can be stopped before it can send orders "Safe state" DAQ hardware, you cannot ensure the DAQ hardware stops correctly.

  There are a few screws that have been written in LV "watchdog", but even those who depend on the operation of LV execution engine.

  You should carefully rethink the entire system, make security issue, one of the main objectives at the beginning.  Most likely, you will find that you need to a separate device, hardware clock or PLC, if the software fails to stop him.  You should also consider whether you need a real-time operating system to avoid some of the problems associated with the standard desktop operating systems.

  Lynn

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Fedora 10 x 86: Installer (Anaconda) ends abnormally

  VMware Fusion 2.x, both in the DVD on the i386 netinstall CD i386, with Fedora 10 Installer (Anaconda) ends abnormally.

  No problem, however, with the correspondent x86_64 and with the Live CD.

  The host system is Mac OS X 10.5.6 with 4 GB of RAM (shouldn't matter, in any case); I tried the guest with Red Hat Linux and 2.6 other kernel parameters: no difference. attributed to 512 MB of RAM and 20 GB virtual hard drive; installed directly from ISO images.

  Two screenshots attached: one with the DVD, another (which is just a little further, loading X) with the netinstall CD...

  I had no problem installing Fedora 10 to Fedora-10-i386 - DVD.ISO (md5sum = 12905AB31476CC6D9DFC7C92348C4629) using VMware Fusion 2.0.2 (147997) and set as the nucleus other Linux 2.6. 512 MB of RAM and a hard drive of 20 GB SCSI.  The installation went like a text book install without any problem and I'm at the Office Fedora 10 write this now.  The mouse can even move between host and desktop computers without having to install VMware Tools or by pressing control (and nice).

  So really, I don't think it's a question of Fusion and I would check the md5sum of the ISO that you work with valid support.  Other then that I will make the Mac RAM tests and also the hard disk for physical and not defects only tests that preforms disk utility which does not actually test the trays by sector at the block level.  Other then making sure the Mac hardware out very well then uninstall/reinstall of Fusion is the only other suggestion I have for the moment.

• -"Ended abnormally Microsoft Visual C++ runtime error."

  PS Elements - runtime error - Microsoft Visual C++ Runtime Library - this application has requested in an unusual way

  See if this helps:

  http://helpx.Adobe.com/Photoshop-elements/KB/Microsoft-c-runtime-error-launcing.html

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BBM process ends My App

  Hello. I pulled the BBM 10.1 Github sample. With a few minutes of hacking, I'm the thing to work (sort of).

  When I press the update of status ActionItem get the following output in my debug console and my application ends.

  Process 855376113 (BMM10Z) terminated SIGSEGV code=1 fltno=11 ip=786182b4(/base/usr/lib/libbbplatformbbm.so.1.0.0@_ZN2bb8platform3bbm11UserProfile28requestUpdatePersonalMessageERK7QString+0x3) mapaddr=000482b4. ref=4d617469 bdslot=1
  

  Questions

  How can I determine what causes this error? How can I fix it?

  Help?

  I was pointing the ActionItem imageSource to a an active url that does not exist. Delete the fixed property. It's getting late.

  

• Essbase ends abnormally

  Hi all

  The Essbase server crashed suddenly and I checked the newspaper he just mentioned as below

  [2015-10 - T 02, 16: 22:06.337 - 20:22] [ESSBASE0] [AGENT-1163] [WARNING] [1] [] [ecid:1443344724227, 0] [tid:7780] insufficient privilege for this operation on certain applications where this is not done

  [2015-10 - T 02, 16: 22:06.462 - 20:22] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:1900] customer received request: MaxL: describe (from user [])

  [2015-10 - T 02, 16: 22:06.462 - 20:22] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:1900] output columns described

  [2015-10 - T 02, 16: 22:06.462 - 20:22] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7816] customer received request: MaxL: define (from user]

  [2015-10 - T 02, 16: 22:06.478 - 20:22] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7816] customer received request: MaxL: Fetch (from user [l

  [2015-10 - T 02, 16: 22:06.478 - 20:22] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7816] the records retrieved

  [2015-10 - T 02, 16: 22:06.478 - 20:22] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7812] customer received request: MaxL: Fetch (from user]

  [2015-10 - T 02, 16: 22:16.509 - 20:22] [ESSBASE0] [AGENT-6704] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7904] request Ping OPMN received

  [2015-10 - T 02, 16: 22:16.509 - 20:22] [ESSBASE0] [AGENT-6705] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7904] sent the reply to the Ping OPMN

  [2015-10 - T 02, 16: 22:20.790 - 20:22] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7804] customer received request: MaxL: run (en

  [2015-10 - T 02, 16: 22:20.947 - 20:22] [ESSBASE0] [SYS-106] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7804] [F:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase_0\log00007.xcp] log Exception error is being created...

  [2015-10 - T 02, 16: 22:22.415 - 20:22] [ESSBASE0] [SYS-107] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7804] Exclusion errorlog finished F:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase_0\log00007.xcp please contact technical support and provide them with this file

  [2015-10 - T 02, 16: 22:32.416 - 20:22] [ESSBASE0] [AGENT-4018] [NOTIFICATION] [16] [] [ecid:1443344724227, 0] [tid:7804] RECEIVED the ORDER to STOP ABNORMAL - ESSBASE CLOSING

  Also only checked the xcp file and send it to oracle, but there is no clue to the question.

  ID 7804 of thread:

  Request name: MaxL: run

  Name of the database:

  Username: ldap://DN=uid=

  Departure time: Fri Oct 02 16:22:20 2015

  End time: pending

  -Exception error end journal-

  Checked with the user when the server crashed. The user was trying to see the Regional service console Session and he was killing the idle user before crashed.we use Essbase 11.1.2.1 server in windows server 2003 R2 64-bit.

  Let me know if no facing the same problem and what was the first cause and solution.

  Kind regards

  Naveen Chauvet

  Hi TimG,

  Thanks for your reply.

  I found the cause of this problem of issue.the will occur when the user who is to have an application on the application role manager attempted to sign the user out of the Regional service console session that has the same role on the application. I checked with Oracle for this. They confirm that there is a bug on the version (11.1.2.0) current that we use. Only way to fix this is by informing the user to not perform this task on EAS Session.Only Admin console can log out or kill the session users.

  Kind regards

  Chauvet Naveen M

• 6.18 Skype starts, the process ends directly after startup

  Running Windows 7 family SP1, X 64, the latest version of Skype.

  Whenever I run Skype, the output connected icon in the taskbar, but it disappears as soon as I have the mouse over it. Looking at the Task Manager, Skype starts and ends and then right away.

  Event Viewer / custom views / administrative events has the following entries, which may or may not be connected: http://pastebin.com/j2VDpAbF

  I already tried things:

  • Uninstalling and reinstalling
  
  
  • Uninstall, remove the folder appdata (roaming and Local), remove entries from registry of Skype and re - install.
  
  
  • Running Disk Cleanup Skype running as administrator.
  
  
  • Running Microsoft Fixit ProgramInstallUninstall to uninstall before installing again.

  I can't find older versions, I think because Microsoft wants to encourage the use of more secure versions / patched, so I can't say if this question is directly related to the most recent version, or something on my computer.

  If anyone has any suggestions for what to try next, I would be really grateful.

  scutterman wrote:
  

  Here are the DXDiag information, as requested.

  Uninstall IP camera [JPEG/MJPEG]. This virtual device video capture is known to cause problems with Skype.

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!