From obiee weblogic linux services after simple installation

Similar Questions

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Not able to connect to APEX Administration Services after new installation

  Hello

  I installed oracle database 11g (11.2) and apex 4.2.3 in my laptop.  I did all the steps and now I'm at the stage

  "Create a workspace and add users of the Oracle Application Express".

  When I'm starting to apex, I get just blank page.  Don't know what the problem is.  If anyone can help.

  http:// localhost : 8080 apex_admin/apex/apex_admin

  There's no problem in logging into Oracle.  I faced a problem when setting up "Embedded PL/SQL gateway.  Not sure if this causing issues while opening apex.

  . Loading images directory: C:\Anand\APEX\apex_423\apex\images

  Created directory.

  declare

  *

  ERROR on line 1:

  ORA-22288: file or LOB FILEOPEN operation failed

  The system does not have the specified path.

  ORA-06512: at "SYS." XMLTYPE", line 296

  ORA-06512: at line 16 level

  PL/SQL procedure successfully completed

  Thank you and best regards,

  -Anand

  Hi Jariola,

  Don't know why my my configuration of the embedded PL/SQL gateway failed after repeated tests.

  I uninstalled APEX completely and then kept my "apex" installation folder under "c:\temp".  Then run under-

  @apex_epg_config.sql C:\temp

  This time he succeeded without any problem.  I am now able to connect to the apex

  The only change is the folder when I kept my installation of apex.  Earlier, it was "C:\Anand\APEX\apex_423" and now "c:\temp\apex".

  Platform

  APEX version: 4.2.3.00.08

  DB version: 11g Release 11.2.0.1.0

  Web server: EPG

  System operating system: Business Windows 7 64 bit

  Browser (s) / version (s): Google Chrome: version 31.0.1650.57 m

  Thanks to all who tried to help.

  Kind regards

  -Anand

• After the installation of Internet Explorer on my computer I can not open organizer of Photoshop Elements 10 (Russian version) on my computer. By the Organizer message appers opening attempt "it is not possible to run DirectX. Check please, if the program

  HelloW!

  Please help my.

  After the installation of Internet Explorer on my computer

  I can't open the Organizer in Photoshop Elements 10 (Russian version) on my computer.

  By the Organizer message appers opening attempt "it is not possible to run DirectX. Check please if the program is installed on your system.

  I checked my computer - computer installed DirectX11.

  Before that time I have hade any problems with the opening of the Organizer

  Greetings from sorts

  duplicate thread: after the installation of Internet Explorer on my computer I can't open organizer of Photoshop Elements 10 (Russian version) on my computer. By the Organizer message appers opening attempt "it is not possible to run DirectX. Check please, if the program is in

• Patches of Toshiba Service Station closes after starting after the installation of 3

  Hello

  We recently have a "patch day" Toshiba Service station. I think from my memory that the patches are released earlier, but I installed them on April 23, 2010. There are three patches, and so that I can restore from the system recovery, it was:

  -Flashing of BIOS
  -Patch HDD/SSD Alert
  -HDD Recovery patch.

  So, not to mention that I had problems to make the flashing patch BIOS to run, finally extracting installation files to another location and run it with administrator rights.

  My problem is that after this session of patch, my Toshiba Service Station no longer starts. When I start my system, after recording on it seems to start upward but always farm then again with windows say error report 'stopped working' and that's it. I'm not sure patch who this could be. I also believe that one of these Islands said in the description that it will update station itself? I downloaded Service Station on the Toshiba site but it will not prove at best, does not matter if I uninstall it, before you start the installation with administrator rights or not.

  My system is Satellite A500, Windows 7 64 bit.

  I hope you can help. Unless I can't access the updates anymore!

  Note: A few days before I installed a graphic driver for my Nvidia GT 230 m SINCE THE SITE WEB of NVIDIA. Why am I? I've lived literally all HOURS a unwanted system reboot and I see in the problem report it was always because of the graphic driver. Subsequently, I installed the two patches from the site of Toshiba, the elders and the most recent, but the problem persisted. Fortunately, a few days I have recheched the Nvidia site and there was a new driver.

  Although he said BEFORE (not now anymore) that this graphics card should be based on a driver manufacturer, I installed it but because he Coulnd't ' t get worse. The positive thing is that I didn't have a single far system crash even if I leave the phone turned on for hours.

  I'm not sure if the problem with the gas station started right after the installation of the graphics driver, but it can't be because I installed the three patches mentioned above, through gas station, a few days later.

  But he seemed to have affected the software after these patches? I'm not sure.

  Hello

  Simply said; Toshiba Service Station breaks down and new installation of this tool didn't help.
  Right?

  Well, because you are not sure what s wrong and depending on the assignment, you have other problems with the software, I recommend to recover the laptop using the recovery of HARD drive option!
  This will outline the laptop to factory settings.

  Of course, you must back up the data if you have important files.

  Run recovery disc HARD and after that check how the laptop would serve!

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Reconfiguration of Hyperion after DB moved from Solaris to Linux

  Our Hyperion databases go from Solaris to Linux. We need to reconfigure Hyperion EPM to point to the new DB of Linux. We have 4 servers Hyperion A, B, C, D.

  Server: Foundation Services, area of work, reporting & analysis, planning, Calc Manager, Shared Services, EAS, APS.

  Server B: EPMA, Essbase studio

  Server C: ODI, FDM

  D: Essbase Server

  Our intention is to do the steps below:

  (1) stop all services of Hyperion.

  (2) stop the databases on Solaris servers.

  (2) configure Foundation first of all on the services server (Server A) basis, using the EMP system configurator.

  (3) set the Foundation on others 3 (B, C, D) servers that are having EPMA, FDM, Essbase etc.

  (4) Foundation-Foundation services server (Server A) application server deployment.

  (5) configure / deploy DB for the rest of the products.

  We tried to do similar steps the last time. We were able to make Foundation, but for other products, he failed. Please let us know if these measures are correct?

  We are on version Hyperion 11.1.2.2.300. Operating system is Windows 2008 64 bit.

  John, we could reconfigure Hyperion for the new DB of Linux. We used the connection to one up to set up the database and reuse the option existing tables. Thank you for all.

• Problems with the installation or after a simple installation of vSphere Hypervisor

  Hello

  I'm just testing vSphere hypervisor and went through the VirtualCenter installation program. I made the simple installation. I recently had a class on the hypervisor, so I thought I would give it a shot with a testlab. So far, turn not 100% great. After the simple installation on Windows Server 2012, I'll log on to the device of vCenter Server (5480) and get "this webpage is not available". It seems that I can't access anything that has to deal with vcenter server. The only thing that I know that I can access is the vSphere Web Client to manage hosts, in which he tells me to connect to vCenter server...

  I have install it on 1 virtual machine. Any suggestions? Please tell me if you need more information.

  Community of VMWare YOU thanks.

  Have you tried to access the vCenter Server by using its URL with port 9443 and the username that I mentioned in my previous answer?

  André

• Hello! How can I change the language of the menus IndesignCC from Russian to English after the installation?

  Hello! How can I change the language of the menus IndesignCC from Russian to English after the installation?

  I don't think you can.

  Uninstall id, open your cc desktop application > click settings (the gear icon) > preferences > apps > app language > English > reinstall id

• Loss of FN - key after the installation of the updates from Microsoft on L500 security

  I am using a satellite L500-19U

  After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
  also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
  I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

  The following security packages are selected to be installed:
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)
  Update security for Windows 7 for x 64-based systems (KB979683)
  Update security for Windows 7 for x 64-based systems (KB980232)
  Update security for Windows 7 for x 64-based systems (KB981332)
  Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

  Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

  Post edited by: JoJo58

  Hello

  If you read about these update on the Microsoft website: (not of them should affect the FN keys)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

  I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

• After migration from Solaris to Linux reports do not work properly

  Oracle e-Business 11.5.10.2 - seeds pdf reports

  Some do not run giving error:

  EMSG: led by Signal 11

  Others work but are formatted incorrectly.

  Background:

  Migrated from solaris to linux. -11.2.0.4 database.  Upgrade from Solaris to dev 6i group patch 28 - everything works.

  On linux, install techstack then switch to dev 6i patchset28 also.

  
  

  I checked the support and apply a hotfix that was a possible fix-

  Bugs: 5232832 - APPS6: BLANKS INSERTED IN the CHARACTER MODE OUTPUT

  subsequently found out that it's just for the report of the bitmap.

  
  

  Check all the notes I've found, but nothing seems to apply.
  

  
  

  My character set is the same on Solaris and Linux-
  

  US7ASCII NLS_CHARACTERSET

  NLS_NCHAR_CHARACTERSET AL16UTF16

  Anyone have any ideas? Thank you!

  11 signal problem is resolved as follows:

  The reporting engine, on the Linux server upgraded, is not able to parse an sql validation using a table via dblink only at a specific location in the report. There are several other places in the report where it is able to analyze the same sql, it is so inconsistent and there is no error message relevant to this effect. The solution has been applied through rewriting of these validations to validate within the EBS itself and therefore, the functionality remains unchanged.

  Formatting problem was solved by re copy the rdf from the source in binary mode.  Something must have happened to the file to archive original, OR a nobody messed with the report on the target of unknown to me!

  Also, I set up printing blocks and drivers for the system and styles, so maybe it was a combination of the two actions.

  Thank you for all your help.

• Installation Directory of OBIEE in linux

  Hi all
  
  I try to install OBIEE on Linux, server, by default the installtion directory will be
  
  / usr/local/OracleBI
  
  / usr/local/OracleBIData
  
  Is mandatory to install OBIEE under these directories or can I just install in any other directories as any mount point (/ mnt/OracleBI) or under home directory (/ home/Vinay/OracleBI)?
  
  
  Thank you
  Vinay

  If I remember it correctly, you're going to specify the location such as/usr/local.
  Thus, you can go for any place other than what Oracle has suggested.

• Output post processeor is out of service after installation of r12

  Snoussi,
  
  It's a continuation of my previous post,
  
  Re: Login Page not plurarite after the installation of the Multi node.
  
  
  After running autoconfig, all the concurrent Manager are up and running, but when I tried to raise OPP its not come at all.

  Hello

  Please check the OPP log file, you will find more information about the error (look for the file FNDOPP*.txt under $APPLCSF / $APPLLOG directory).

  Kind regards
  Hussein