From the start, I get a message saying 'cannot load personal settings.

Similar Questions

• My latitude D610 crashes on me. From the start, I get this message on a blue screen: a malfunction of equipment

  Message hole bed hardware malfunction call your hardware support vendor.

  NMI: Parity check/Memory Parity Error

  The system is shut down

  Now it's on a blue screen and then I have to hold the power button until the computer turns off. Nothing was wrong with her until my Bilkin wirless card broke and I had to reinstall the Witch of a down preveusly internal wireless card so I shot, but it worked very well until I had to stop so we could go out and then when I turned on the computer laptop back it keeps in past. now is this a problem with the wireless card or my memmory?

  With it this way I can get on only in plain old safe mode not safe mode with networking. Maybe that I need to take the card out and try it and if it works I think I'm stuck hang the old wiring cat 5 and goining this way right or wrong? What is a body to do? I have not I hope so gruff like to be wireless, I mean after all that's why I pay big bucks so I can go wireless.

  Thanks in addvance here you guys for the excellent work to help us poor people in this way.

  jimmy1950hailey

  Jimmy

  If I understand your question, yes get out the wireless card and try. If that too fails, contact Dell or your local computer repairer.

• Just started to get a message saying that my product no longer works because I installed it on two other computers, my other computers do not work, then the facility in my new computer it worked for a little while, then this message kept popping up, what

  Just started to get a message saying that my product doesn't work more because I installed it on two other computers, my other computers do not work, the installation in my new computer, it worked for a little while, then this message kept popping up, what can I do to make it work on my new computer?

  For more information on the activation or deactivation of Adobe products on your computer, please follow the instructions contained in this document:

  Activate or deactivate an Adobe product

  You can also make reference to: connect and disconnect from the desktop Adobe Creative Cloud application

  I hope this helps.

  Concerning

  Megha Rawat

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• From the start I get message "Auto Detect (input analog)

  I have a HP Pavillion T560A connected to a Dell monitor.  When I turn on the PC I get a message: auto detect (analog input). In energy saving mode.  Press the computer's power button or any key on the keyboard or move the mouse.  When I do that nothing happens.  How can I start up?  Jim cordially

  It has not been used for four months but was only servcied a week pprior to that and worked well.  The fan turns on and the hard drive seems to be working.  I tried to presisng the F8 key as I turn on but to no avail

  Sorry but no.  I took it for an exoert which he cleaned up and said it was contacts simply dirty - works perfectly now

• Media player - when I play or rip the CD, I get a message saying that Media Player is unable to read the disc, it is damaged or dirty...

  I've upgraded to vista and when I play or rip CD I get message saying media player cannot play the disc it is damaged or dirty, it is same disc brand new

  Hello

  Follow the steps in the links below and check if this can help: CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista: http://support.microsoft.com/kb/929461

  You can also run the patch from the link below: your CD or DVD cannot read or write media: http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us?entrypoint=lightbox

  Install the most recent and updated drivers for the device. For steps see: updating a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• In Control Panel, when I click on the firewall icon, get a message saying that firewall Settings.exe is not found

  While in the Panel, I click on the firewall icon and I get a message telling me that the firewall settings.exe is not found. How can I fix it? My OS is Vista.

  * original title - order pane icon problems *.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• When I try and print from the internet, I get a message to add a printer but I can print emails fine.

  original title: printer problems

  When I try to print the Web form, I receive a message to add printer, when a printer is already connected and working.  I can't print at all from the internet but you can print emails

  Hello

  1 have you made changes to your computer recently?

  I suggest you to follow the steps below link Microsoft and see if it works:

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

  Concerning

• get a message saying cannot access Windows Installer

  When downloading files to my Windows Vista 32, I get a messagesaying cannot access Windows Installer. What I would do.

  1. exit all Windows programs.

  2. click on start, type run in the start search box and press ENTER, type msiexec /Unregister in the Open box, and then click OK.

  3. click on start, type run in the start search box and then press ENTER, type msiexec/regserver in the Open box, and then click OK.

  4 restart your computer.

  If the problem persists, please run the SFC system by the following steps:

  1. Insert the Windows Vista installation in the DVD-ROM DVD; If the auto-menu, click on exit.

  2. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. at the command prompt, type the following command and press ENTER:

  sfc/scannow

• From the start I get network error message: DHCP error event ID 1003 began ID1002.

  I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider.  When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002.  I was on the phone with Verizon, restarted Wiresless router and they did some other configurations.  Looks after the router restarts and stuff and revive his party.  But after a while he comes back again after cold reboot. Services DHCP is set to automatic.  I don't know that he always comes to the top.  Any help would be appreciated.

  Hello
  You can check these links:
  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1002&EvtSrc=DHCP&lcid=1033

  I suggest you to contact your Internet service provider to verify the DHCP in your router settings.

• I have always used Acrobat Reader to download the Overdrive of the library books and transfer them in my corner. I recently got a new laptop and had to download Acrobat Reader DC. Now I can no longer download books from Overdrive. I get a message saying t

  I have always used Acrobat Reader to download the Overdrive of the library books and transfer them in my corner. I recently got a new laptop and had to download Acrobat Reader DC. Now, I can download is more Overdrive Audiobook. I just got the message that this format is not supported. Any suggestions?

  I could be wrong, but I do not think that you used to use Adobe Reader. I think you used to use Adobe Digital Editions software instead - a separate app.

• I have problems with my printer, most of the time I get a message saying to start my spooler and when I try it says I have an error any help would be appreciated

  as said I have problems with the printer spooler with the fact that it's the second printer the same problem, it seems to be a Windows related problem

  Hello Martin,

  Try this fix it site: http://support.microsoft.com/mats/printing_problems/ .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• my laptop turns off when I turn it on, and when I try to repair or start I get a message saying that I have an error in my software

  I tried to re start and take out the hard drive, but nothing works I've only had this laptop for a few weeks

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Check to see if the problem exists in Mode without failure.

  See the article below for Safe Mode steps in Windows XP.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2: If the problem does not persist in Mode without failure, then try to clean boot.  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Submit an RSS feed to itunes, but I keep getting a message saying 'cannot submit your feed. There is no description tag in your diet, or the description tag is empty. "Any advice on how to solve this problem?

  Our podcast is released through Libsyn, who confirmed to me that our RSS feed is valid. I talked to two Libsyn and itunes support or knew what it is I do. Thanks a lot for any advice you may have.

  RSS feed: http://enslavedbythebell.libsyn.com/rss

  I went and tweaked your workflow slightly.

  Try to send back you your feed now.

  Rob W

  libsyn