From XML SOAP webservice process Adobe-ask

Similar Questions

• have a question from Final cut pro to adobe first

  

  Simply switch from Final cut pro to adobe first and want to know how or is it possible to have the window of similar edition as final cut pro, I found it a bit annoying that I can't see the video frame-by-frame in the editing window x_X

  Each version is different so please state your version when you ask a question.

  If you don't people guess the last CC version.

  

• javax.xml.soap.SOAPException: Message send failed: connection reset

  Hello gurus,
  
  I try to install IAM on a cluster deployment. I have a physical as a front-end load balancer, which ensures the load to alternately between the two servers where IOM managed servers are deployed.
  When I try to start an approval process, SOA server seems to not be able to connect to the servers of the IOM, which gives the following error:
  
  < 23 April 2012 12:01:11 CEST > < error > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not send request to http://identitymanagement.mydomain:14000/workflowservice/CallbackService because of the exception
  javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: connection reset
  at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:851)
  
  where < identitymanagement.mydomain > is the host name of the cluster. Maybe SOA calls are directed in the timeout while trying to connect to the IOM (cluster balancing algorithm times), so, considering that Web services take time to answer (say 10 min), I want to know if there is such a setting on SOA to configure so that it never go into the time-out in the meantime that web services to answer.
  
  Thank you
  Carole

  Ejani,

  If you want to confugure time-out, see as follows:
  Re: Asynchronous BPEL 2.0 problem - Transaction rolled back to

  But I'm not sure that it is on the side of the soa. Try to increase the parameters of time-out on the (Bounce the server SOA) load balancing

  Arik

• navigateToURL from XML data

  (Edited for clarity 13:16's)
  
  OK thanks to Greg, I have this with a redirect built in barchart:
  
  This is my simple histogram:
  
  < mx:BarChart = x "561" y = "198" id = "CapitalExpenditures" dataProvider = "{I}" width = "762" showDataTips = "True" fontSize = "12" height = "371" >
  < mx:verticalAxis >
  "< mx:CategoryAxis categoryField="@type "/ >
  < / mx:verticalAxis >
  < mx:series >
  "< displayName = 'Spending' xField="@balance mx:BarSeries ' fill = race "{sc1}" = "{s1}" labelFunction = "formatNumber.
  Click = "navigateToURL (new URLRequest (rptWebsite))" >
  < / mx:BarSeries >
  < / mx:series >
  < / mx:BarChart >
  
  It works very well, but rather than hard code the URL, I would like to get from XML data that are already loaded into the system and assigned to a XMLList "di". My XML file is structured as follows:
  
  <>projects
  "< prName work = hours of 'One-project' = '705.50' rptUrl = ' http://www.google.com" / > "
  "< prName work = hours of project 'B' = '370.00' rptUrl = ' http://www.yahoo.com" / > "
  < / project >
  
  What I want to do, use the URL of the XML file, under the name of rptUrl as the URL path in my re - direct.
  
  I tried to put everything in navigateToURL (new URLRequest (@rptUrl) "> in but could not compile.")
  
  My confusion is the place where to insert the value in the URL variable and precisely what syntax to use? I have to use e4X for example?
  
  I created this function to my redirection:
  
  public void goUrlTFP(event:MouseEvent):void
  {
  ' rptWebsite =' http://www.google.com "
  navigateToURL (new URLRequest (rptWebsite)) return
  }
  
  It compiles, but I get nothing in the variable.
  
  I'm using the wrong syntax? I have to do something other than a mouseEvent of my function? Should I trigger the function somewhere else to the click event? I have to browse the file and fill a XMLList or something?
  
  I tried rptWebsite=item.@rptUrl and rptWebsite=ceDs.@rptUrl, but those who could not compile
  
  M.

  M, without trying to sound like I'm raggine on you (yet), I'm curious to know how you go about detective your way through the API to come up with possible solutions. What is your thought process? I wonder if it wouldn't you get more if you provide some tips on how to use the API correctly. Teach you to fish instead of giving the fish (for setting the proverb a little).

  I certainly did not know the answer to your problem just a few minutes ago, but it's literally what it took me to find what I think can be an answer to your problem.

  You have defined your features such as:
  Click on a bar chart and have it redirect to a URL that does not exist in the dataProvider of the histogram.

  How can we get these data to URL? The first thing to check would be click events. We look at the possible events that can be shipped when clicking the chart element (BarSeries) or component BarChart himself. When you look at the 'click' for the two event I wasn't expecting much in the measure where this event carrying additional information that I might be able to use, it's just a simple click event. And if I did event.currentTarget, there is no property that directly gives me the data I'm looking. However, in the API, I see an event type itemClick ChartItemEvent (under events) for BarChart which seems promising.

  Then I look in the API to ChartItemEvent and note that there is a property "hitData" type HitData which seem also promising. Now I look at HitData in the API and see that there is a property "item. It's more likely that the element that is used to render the particular BarSeries I clicked on. So I think that I can easily get the related data on an itemClick event.

  I tried and it was of course the data that I expect. I can remember something painfully obvious and much simpler to obtain these data, but I think this thought process shows that with a little effort, you can get a few runs in the API that you will probably have your solution. I doubt there is anyone on this forum who knows everything there is to know about the API. Use the docs, they are your friend.

  BTW, what is the other language that you are more familiar with what you're talking about from time to time?

  TS

• !!! Need to print the javax.xml.soap.SOAPElement - please help

  Hello
  I have a webservice correctly executed in Weblogic 9.2. I wrote a stand-alone client that receives the javax.xml.soap.SOAPElement as return type of webservice. As
  SOAPElement soapElement = port.getClientPartyIdFromBrAcct("CV4009946");
  I can properly see the request and response using the TCP/IP monitor.
  
  But I need to print the entire SOAPElement as a string. Because I set the SOAPElement as XML in an HTML page to display in the browser... in a way properly shaped.
  Please let me know how I can do it.

  Hello
  I did something similar. You can add the following method:

  public String convertDocumentToString (input element) {}
  DOMSource domSource = new DOMSource (input);
  StringWriter writer = new StringWriter();
  StreamResult result = new StreamResult (writer);
  TransformerFactory tf = TransformerFactory.newInstance ();
  Transformer transformer;
  try {}
  transformer = tf.newTransformer ();
  transform. Transform (domSource, result);
  } catch (Exception e) {}
  System.out.println (e);
  }
  Return writer.toString ();
  }

  It will return your xml into a string and then call with your SOAPElement object as input.

  André

• I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  I'm currently developing the feature keys on my MacBook. In the process, he asked that I enter a code sent by message to a phone number (only the 2 last digits are revealed) that I do not have access to.   How can I fill the activation?

  See "change how the new features can be approved" here:

  OS X Yosemite: Configure iCloud keychain

  As you can see, this allows you to change the phone number.

• Thunking spooler APIs from 32 to 64 process has stopped working

  I get this error, Thunking spooler APIs from 32 to 64 process ceased to function, that when I try to print my bank statement which is in the format pdf from my Bank Web site. Otherwise I am able to print from other applications, including Microsoft Office 2000 applications. I am running Vista Home Premium 64 on a laptop Dell Inspiron very new. I already uninstalled the printer several times and that you have downloaded your uninstall cleanup utility, none of this has worked. In addition, no other threads in the forum seem to be like mine. I was able to print from this site as a first step, but are not able to since a few months now. Is this a compatibility issue with the software that is using my bank or is there another problem. My wife has a similar laptop with XP OS and I can print the declaration of his fine form.
  Thanks for any help on this matter.

  I just had the same problem a couple of days.  After uninstalling my printer drivers and reinstall, I always had the same problem.  I tried a few suggestions on these posts, but still nothing.  When I opened my printers in the Control Panel, I found three other printers listed two for quicken and Microsoft office, I deleted these (but not my original HP inkjet printer) and it worked. Hope this helps someone else.

• API from 32 to 64 process thunking spooler stopped

  problem connecting to the printer error message: need software theprinterdriver orreinstall changeport assignment.

  also: thunkingspoolerapis from 32 to 64 process hasstopped

  Hi Patico,

  I suggest that allows you to check the following solution provided by Matt H - Support Engineer if it helps:
  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/87a2fe8d-5a2c-48c1-85fe-05ec22720b1e

  Concerning
  Terminator

• Bought the plan from month to month for Adobe Illustrator CC but creative cloud shows «We have found an Adobe Illustrator CC 2015 associated with this Adobe ID...» "Could not find any help to communicate directly with Adobe!

  Hi all, I'm quite new here and I really need help!

  I have purchase a plan from month to month for Adobe Illustrator and it does not at all! Creative cloud does not recognize my subscription even after receiving an email of confirmation of purchase from them. I'm really angry that there is not anyway to email Adobe or call them (I'm in Singapore).

  I check my account on the website and it says that I can't look at my plans/subscription now for maintenance.

  Which means that anything that I can do, even if I want to terminate the program now. It is a very overwhelming experience T.T

  Thanks in advance!

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  Contact technical support during the week - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I want to install Ps creative cloud. Adobe asked me to begin to "CreativeCloudSet - Up.exe". Where is this file?

  I want to install Ps creative cloud. Adobe asked me to begin to "CreativeCloudSet - Up.exe". Where is this file?

  No problem, it would be possible to capture and share a screenshot of what you see?

• Cannot install acrobat DC because cloud adobe asking me to buy this app, because the license has expired? How can I deal with this issue

  I installed abobe creative cloud and now I'll try to install acrobat DC but cloud adobe asking me to purchase this app because my license is expired.

  We just renewed our licenses

  @

  Please see:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

  How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

  You can download it from this link and post with your serial number. You can run LR5 on both machines.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5856

• Update of a column of table from xml data

  Hello

  I have an obligation to update a particular table from xml data column. to do this, I wrote the code below but I am not able to insert. could you please a peek into that.

  create table emp3
  as
  select *From emp
  where 1=1;
  
  alter table emp3
  add (fax_response varchar2(50));
  
  /*create sequence EmailRecords_XMLFILE_SEQ
    minvalue 1
    maxvalue 999999999999999999999999999
    start with 1
    increment by 1
    nocache;*/
  
  /* create global temporary table EmailRecords_XMLFILE
    (
    ID NUMBER not null,
    xmlfile CLOB
    )
    on commit preserve rows;*/
  
  /* create global temporary table UPD_Email_Records_With_Xml
    (
    id NUMBER not null,
  
    response VARCHAR2(500)
  
    )
    on commit preserve rows; */
  
  
  

  the XML data is

  <FAX>
  <EMAILOG>
  <ID>7839</ID>
  <RESPONSE>FAX SENT</RESPONSE>
  </EMAILOG>
  <EMAILOG>
  <ID>7566</ID>
  <RESPONSE>FAX NOT SENT</RESPONSE>
  </EMAILOG>
  </FAX>
  
  
  

  CREATE OR REPLACE PROCEDURE proc_upd_email_records (
     loc_xml          IN       CLOB,
     p_err_code_out   OUT      NUMBER,
     p_err_mesg_out   OUT      VARCHAR2
  )
  IS
     loc_id   NUMBER;
  BEGIN
     loc_id := emailrecords_xmlfile_seq.NEXTVAL; --created sequence
  
  
  
     INSERT INTO emailrecords_xmlfile --created Global Temp table
                 (ID, xmlfile
                 )
          VALUES (loc_id, loc_xml
                 );
  
     COMMIT;
        insert into UPD_Email_Records_With_Xml --created Global Temp table
          (ID, RESPONSE)
          select x1.id,
  
                    x1.RESPONSE
            from EmailRecords_XMLFILE,
                 xmltable('/FAX/EMAILOGID' passing
                          xmltype.createxml(EmailRecords_XMLFILE.xmlfile)
                          columns header_no for ordinality,
                          id number path 'ID',
                          RESPONSE VARCHAR2(250) path 'RESPONSE'
  
                             ) x1
           where EmailRecords_XMLFILE.id = loc_id;
     COMMIT;
  
     UPDATE emp3 er
        SET er.fax_response = (SELECT response
                             FROM upd_email_records_with_xml pr
                            WHERE pr.ID = er.empno)
      WHERE er.empno IN (SELECT ID
                           FROM upd_email_records_with_xml);
  EXCEPTION
     WHEN NO_DATA_FOUND
     THEN
        raise_application_error
           (-20000,
            'Sorry ! The Xml File which is passed is empty. Please try with Valid Xml File. Thank you!!! '
           );
     WHEN OTHERS
     THEN
        p_err_code_out := 4;
        p_err_mesg_out := 'error in insertion=> ' || SQLERRM;
  END proc_upd_email_records;
  {code}{code}
  
  
  

  Someone suggest me a slightly easier way to insert data...

  Thank you...

  You're complicating things

  A simple MERGE statement will do.

  create or replace procedure (proc_upd_email_records)

  loc_xml in clob

  )

  is

  Start

  merge into e emp3

  a_l'_aide_de)

  Select id

  response

  from xmltable)

  "/ FAX/EMAILOG.

  by the way xmlparse (document loc_xml)

  the columns id number way "ID".

  , path of varchar2 (250) response 'RESPONSE '.

  )

  ) v

  on (e.empno = v.id)

  When matched then update

  Set e.fax_response = v.response

  ;

  end;

  /

  But there is no value added by using these temporary tables if you are not at least an intermediate XMLType column (storage preferably binary XML).

  -What is the input XML code?

  -What is the version of db?

• SOA: Not a valid SOAP Content-Type: xml/soap-env; Charset = UTF-8

  Hello

  Jdev version: 11.1.1.5.0

  I'm getting the following exception when calling one of my target BPEL services:

  Caused by: javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: not a valid SOAP Content-Type: xml/soap-env; Charset = UTF-8

  Any idea on this problem?

  Thanks in advance.

  This problem may occur in the case.

  1. when the load useful to request SOAP is incorrect.

  2. what a load of SOAP response is incorrect.

  You can join strategy journal GOSA and you will find which is the organ that is out & are coming to understand the question and soap headers.

• I bought an annual subscription from month to month with Adobe Creative Cloud. I have the applications installed on my Mac but when I downloaded Adobe Creative cloud on my PC, it's wanting to download me new applications of 2014 and there is no way to dow

  I bought an annual subscription from month to month with Adobe Creative Cloud. I have installed on my Mac apps but when I downloaded Adobe Creative cloud on my PC, it's wanting to download me new applications of 2014 and there is no way to download previous versions for my PC. What should I do? I can not even cancel my subscription because Adobe has hidden this option.

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html