installed new HD cannot know wireless?

Similar Questions

• New routers cannot connect wireless for HP 3510

  I have a new router and you have to reconfigure the connection Wireless for my HP 3510.  I go to the printer and the installation program and to reconfiqure and it States to connect to a USB cable which I am there my new SSID and password on my PC which is correct, and then when I go to then it fails to connect.  What should I do?

  Called Technology Services, it took 2.5 hours to solve the problem.  It seems as the Deskjet 3510 series (mine is actually and 3512) has a big problem with the connection to suppliers IP router which I just got.  They did fix after taking possession of my PC, the software, re - install the software and then spending a lot of time to get an IP address for the router of unistalling.

• Cannot install new hardware (wireless mouse, ipod) on my Equium M50

  Hello

  I'm a newbie here, I m having problems with my Equium M50-192 don't know when the problem started, but I can not install new hardware have tried to install a wireless mouse and a new ipod, but it will not install the drivers for the latter.

  Any help will be appreciated.

  I don't really know what the problem is here, but it will be interesting to know what exactly happens when you connect a wireless mouse. Is there a HARD drive activity or even error message?

  Can you please check the Device Manager and hardware all listed there? Is this all is well?

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Error code 0 x 80073601: cannot run or uninstall Microsoft security essentials or install new version

  cannot run or uninstall Microsoft security essentials or install new version

  Original title: what is error code ox80073601

  Hi DavidValentine,

  Check that you have removed all other anti-malware real-time products that were already installed on your PC, including free products / trial that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware bytes (paid), etc.).

  Note: If you use more than one antivirus or antispyware program at the same time, your PC may know a decrease in performance, become unstable, or restart unexpectedly. Before you install Microsoft Security Essentials, or if you want to solve problems with Microsoft Security Essentials, including the update of issues, you must first completely remove your PC Internet security programs.

  You may have to uninstall/reinstall MSE. You should be able to remove MSE of the Control Panel. Uninstall problems see:http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Recommend that you restart the computer to ensure that the uninstall is complete. You can download a new Installation of MSE file fromhttp://windows.microsoft.com/en-US/windows/security-essentials-download

  Response with more information to help you.

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M70-340 - cannot install new windows

  Hello world.

  I had the problem in my laptop. DVD-RAM (mast * one device dvd ram uj - 841 s ata) not work and now I have problem to install new windows on my system! The my laptop do not support USB boot, I can't install USB also.
  I want to know how I can buy compatible DVD RAM for my laptop.

  any suggestion or website link, please add.
  Thank you

  Hello

  Are you sure that your CD/DVD drive is faulty? I want to say have you tried to boot from the Windows disc?

  Usually, you can order a new reader service authorized in your country. Guys offers a new drive and an Exchange if you n t want to do it yourself. Just give them a call or an email, I m that you can clarify this issue with them! :)

• I have an Apple Tv 4 and I can't download netflix, I got the app, but I uninstall and when I try to install new process full of does ' t one appears a message saying cannot download app. Any suggestion on what to do?

  I have an Apple Tv 4 and I can't download netflix, I got the app, but I uninstall and when I try to install new process full of does ' t one appears a message saying cannot download app. Any suggestion on what to do?

  Have you tried a reset or reboot of the ATV?

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Cannot install new hardware.

  It is a very weird problem...

  All computers are Windows XP with SP3.

  I can't install new hardware on computers.  When I plug in a USB keyboard or USB drive, the computer detects it and adding new hardware pop-up... and every time Assistant and he told me he can't install the new hardware.

  I tried with several (work) keyboards, mouse, external hard drives, flash drives all with the same result.

  The keyboard and mouse that are currently connected to the computer very well - work however, if I unplug and plug it into another USB port, they stop working too (probably because they are recognized as new hardware for Windows at this time), until I plug them into their original USB ports.

  In the BIOS, all new and existing keyboards work fine.  I also started a live CD of Ubuntu and all existing works and new material perfectly well there too.

  I uninstalled the USB devices from Device Manager too, but there is no change.

  I connected a PS/2 keyboard, which works fine in the BIOS, but then when I get into Windows, it stops working like the rest nine.

  I tried to start safe mode, but no change is.

  And Yes, I am an administrator on the computers.

  On one of the computers I tried to do a repair of Windows by using the Windows XP CD.  I am able to boot from the CD and select start Windows repair.  However, when I get to the part of the facility where you can only select your language, NO keyboard or mouse work, and I'm totally stuck at this time.  Then I had to do a clean install of Windows on this computer, and everything's fine.  But I can't really do it to my other computer.

  I don't know what else to try.  Any suggestions are appreciated!

  Hi BatmanBob,

  • You have security software installed on the computer?
  • Do you have a group policy on the computer?

  Step 1

  You can also try to temporarily disable the security software of the computer and try to install new hardware and check if it installs. If you are able to install, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

   

  Step 2

  You can also put the computer in a clean boot state and check if any third-party application blocking installation of the equipment and try to install the drivers in a clean boot state. Access the link below and follow the steps to solve a problem by performing a clean boot in Windows XP.

  http://support.Microsoft.com/kb/310353

  You can also communicate with the system / network administrator to check if there is some group policies for installing the drivers and change it.

  If you are still having the same problem after following the steps above I suggest you to send your issuein the TechNet community, given that the computer is on a domain network. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• new hardware found box of bluetooth device will not disappear when you try to install. ultimately it cannot find driver software but comes from the habit get off my computer

  I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
  and it won't go away.  If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software.  The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?

  Hello allysoni,

  Thank you for using the Microsoft Windows Vista Forums.

  I just want to check, your Bluetooth device work?  Or it works and you are just be notified?  What brand is your Bluetooth device and what type of computer you are on?

  Have you went into Device Manager to verify that the drivers are all up to date?  Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers?  If so, right click and select "Update".  If the driver is already updated, and then select uninstall.  (You may be prompted to restart)

  If you are not prompted to restart, click again on the device and select 'Install' please let us know status.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• Cannot install Windows updates and cannot install new programs due to Error Codes: CODE C355, Code 80070652

  Original title: C355 Codes error: CODE, Code 80070652

  I'm unable to download the updates of widows and also have problems to install new programs.  The error is in the topic above and also get a screenshot that windows installs another program that must be done first when don't want to install anything.

  Hi Whitefish50m,

  (1) what programs are you trying to install?

  (2) how long have you been faced with this problem?

  Please provide the number of up-to-date Knowledge Base that you are trying to install.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can follow the steps described in the article below

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  Method 3: You can also view the steps mentioned in the link below

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows