FTP problem

Similar Questions

• FTP problems with the linux ftp server

  Hello

  I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:

  Cannot download the file ' / opt/log/sislog.log'.
  Check if the local and remote path exists and is read and write respectively.

  The system does not have the specified path.

  error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.

  Here is the list of the repertoire of the LUX machine:

  root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
  -rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
  -rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
  -rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
  -rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.log

  Any ideas?

  Hello

  Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.

  The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.

  See you soon,.

  Cheggers

• Active FTP problem between Checkpoint and Cisco PIX

  Hello

  I am facing a strange problem.

  Many of our customers have achieved a Checkpoint FW-1/VPN-1 4.1 SP6 (the last before NG). When they try to connect to an FTP server that is located behind a Cisco PIX firewall, they are not able to transfer data: the connection is established, the authentication to follow, but at the stage of the 'LIST' the connection 'freeze' and the user must close the FTP client.

  Users are facing this problem ONLY in Active mode: passive mode works very well. Turn passive mode FTP client isn't acceptable workaround for most of my clients.

  The problem seems to be related only to the firewall Cisco PIX and active FTP.

  Please, what is someone encountered the same problem?

  Could someone give me any help?

  Thank you in advance.

  Paolo

  Yes it is a (global) problem, even with the last checkpoint firewalls. What happens with Active FTP, it's that each command (get, list, etc.) causes another log on the client (source port) to the server on port 21. If you run netstat from the customer you can check this for yourself.

  What normally happens, with HTTP, FTP, telnet, which have are, it's that the client makes a connection to port 21, 23 etc then returns with a port source such as 1936, 1980, 3000, etc..

  Connect problem with statefull firewall is they do not allow multiple sessions control port number on a destination, as well as a source port can be bound to a destination port, in this case, 21 for FTP. I Don t see it changed, an extreme security risk any time soon, since it s, someone else might be hopping session and block this type of traffic, it's what the stateful firewall are all about and FTP servers are problably the machines more pirated on the planet.

  You´ve mentioned the workaround solution, unfortunately that s the only way, change your passive customers, I think that Unix/Linux customers have a problem with this, change your FTP server can also help, there are multiple servers that can be configured to disable Active FTP, I wouldn know exactly, I only network & firewall... maybe someone else can move on this...

• Problems with CDM - Tracert displaying a line and connection with FTP problems

  I am currently in a class of networking and server, so am pretty new to this.  I'm running a virtual PC with Windows 7 Professional 32-bit and a few problems with my command prompt.  When I use the tracert command, any URL that I use, it returns only a single line.  It also does not matter whether I run it as administrator.  Here is an example of what it returns:

  I also have problems to connect to a server by using FTP.  The mission was to connect to the FTP server of NASA and practice to transfer images on.  I am able to connect, but as soon as I use the 'ls' command that I am, it will expire or say "connection closed by remote host". I encountered this same problem on my PC at home on a regular basis as well.  I used a computer friend, followed the exact same steps and it worked very well on his own. Here's what I saw:

  Any help would be appreciated.  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• FTP problems and printer network in windows 7

  Hello Experts,

  We use an FTP server based on linux to save MS Office files on it and the PC client are Windows XP and Win7 and use MS Office 2003 + 2007 + 2010.
  There no problem at all on XP based machines regardless of the version of MS Office to connect to the FTP.
  Also, there is no problem on Win7 machines using Office 2003.
  But there is the problem where we use Office 2007 or 2010 on a Win7 based machine.

  The problem is that the option ' add/modify Ftp location' never appears in MS Office applications. If we are able to add FTP through the card reader option, he is able to open the FTP files at very slow speed, but he never recorded any file on ftp after editing or having a few new files.

  Also, there is another problem that is a little different but I put the link here, maybe he has links with the above problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-connect-to-printer-in-Windows7-due-to-print/4ca2972f-B961-4769-92f3-4fbd400669e2

  Hi Caabdul,

  Thanks for choosing Microsoft Community!

  If I understand correctly, you have problems with office 2007, 2010 on windows 7.

  Since you are using FTP server would be best for the question you have posted on the TechNet forums.

  Please post the question here:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/thread/a69f4191-6244-45E1-8674-36b2d14a6f7a

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Download via ftp problem

  Hello

  I am trying to download a 'coming soon' page for a customer, riding too one existing site, she (build in Muse). I tried the download with no public_html folder nothing helps. Downloading the files and I don't get any errors, but its existing site is still there. When I asked the designer of the current site for help, she responded with this, and I have no idea where to start!

  "index.html is not visible, because there is a redirect in .htaccess to container.php in your FTP program, you need to enable the visibility of hidden files."

  Does that mean something to someone?

  FYI: when downloading via ftp to my server on Bluehost (for other clients) I have no problem.

  Thank you!

  I'm no expert here, but I suggest to go through this .htaccess tutorial info just in case you are hesitant to ask your colleague for more precision.

• Download FTP problems

  That someone has hurt to download on your FTP servers? or just to get a glimpse into the browser, my page is suddenly empty...

  If you are using the latest version of Adobe Muse, and you have the third-party widget in your Muse, chances are that some of your widgets are not compabtible to the latest version. It's one of the reasons why your page is empty.

  If this is the case, I suggest to go back to a previous version of Muse. How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  To find the widgets that are the cause of a conflict, use a copy of your site on the new version of Muse. Remove widgets one by one and publish your site after each instance to identify the problems causing widgets. Please communicate with the developers of these widgets for your landline number. Meanwhile, continue to use the previous version of Muse. \

  Thank you

  Preran

• FTP problems

  now, I had a problem at least 3 times, and perhaps more, but I have lost track.

  If your ftp upload is interrupted for some reason any system by default apparently to reload the complete site without warning.

  I hesitate to interrupt the download for fear of more problems, but as my site has grown bigger has become a serious issue.

  I have a site with thousands of high quality images.

  the system has now been download the site during six and a half hours no end in site.

  Let me say that again in SIX AND a HALF.

  nearly 700 web pages and 3500 images.

  the changes of origin were about four pages of web and download two or three minutes.

  so, I've now lost a day full because the ftp service has no ability to function properly.

  is there a workaround when this happens?

  and before ADOBE application that I can't send you my file it is near 400 meg.

  I'm a bit late to this discussion. First of all, thank you for providing the context about your file and workflow. It is always useful to understand the impact of different decisions in terms of real-world workflow.

  The code is currently being implemented as you describe. If a download fails after you change some of the files on the server, then the next download will download all the files.

  During the Muse download generates a file named muse_manifest.xml. This file contains a list of all the files on the site as well as a "fingerprint" for each file. When a new download is made Muse grabs the file muse_manifest.xml on the server and checks the fingerprint for each newly created file against what is in the manifest file to determine whether or not the new file should be downloaded. If any file must be changed, then the existing muse_manifest.xml is removed from the server. Once the download is complete the last file which is downloaded/written is the new muse_manifest.xml.

  Although we are talking internally about how we could change this operation to better meet the needs of huge sites on slow network connections download, here a thought about how you could protect against the re-upload everything. Before you start each download Muse, use Filezilla to download the muse_manifest.xml from your site. (It's originally with the index.html file). If the FTP of Muse download is interrupted, use Filezilla to the muse_manifest.xml you copied in the back upward on the server. Which will cause the Muse of repeat the partial download. The download includes the files that have been downloaded before the previous download process was interrupted, but it will avoid Muse re - download everything.

• FTP problem, not connected.

  I am trying to ftp to a server from the window of my labtop but can't, I can ftp to other servers unix, an idea to solve this problem?
  
  
  C:\Users\arif. Gulzar > ftp orasbo2
  FTP > dir
  Not connected.
  FTP > bye
  
  C:\Users\arif. Gulzar > ftp 172.29.0.119
  FTP > dir
  Not connected.
  FTP >
  
  C:\Users\arif. Gulzar > ping orasbo2
  Ping orasbo2.internal.local [172.29.0.119] with 32 bytes of data:
  Reply from 172.29.0.119: bytes = 32 time = 60 ms TTL = 123
  Reply from 172.29.0.119: bytes = 32 time = TTL = 123 56ms
  Reply from 172.29.0.119: bytes = 32 time = 54ms TTL = 123
  Reply from 172.29.0.119: bytes = 32 time = 55ms TTL = 123
  Ping statistics for 172.29.0.119:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 54ms, Maximum = 60ms, average = 56ms

  Hello.
  It looks like on orasbo2 ftp server is not started.

  To check:
  on orasbo2 netstat - na | grep 21

  To activate it.
  Solaris 10:
  svcadm enable ftp

  Solaris 9 and below:
  Edit /etc/inetd.conf to ftp uncomment the line following and restart (kill - HUP) inetd

  Kind regards.

• FTP problem (I think?)

  Hi, I'm fairly new to Dreamweaver, but I've successfully designed and built a new large enough website which works well on the web for several months now.  I update regularly using cyberduck as my ftp.

  I just tried to download several new pages/changes to my site, but without success.  Download cyberduck fine changes.  I followed my usual way that always works. But when I go on the web to see my site, the changes are not there.  The old version of my site still seems to be on the web, not the other.  It comes despite the new site load up in cyberduck as usual.  The new changes etc. work fine when I provided in safari, Firefox from Dreamweaver, but not when load on the web?

  Can someone point me in the right direction on this?  Is this something that I did in Dreamweaver or is this a problem with my cyberduck ftp?  I'm confused!

  Thank you.

  Yes, one of the points I mentioned.  Some changes spread immediately on some servers, pages are cached and you must wait a few hours to a lot more time to make the changes take effect :-)

• Virtual FTP problem

  We have several ftp sites that are configured as virtual ftp sites. All these sites share the same ip address but have a different name from the url. They are independent sites.
  
  Example: http://recreation.townofmanchester.org shares the same address as http://schoolconstruction.townofmanchester.org (two different sites, same ip)
  
  When you create a new connection to a new site at 3.11 contribute, for example leisure, I get an error message indicating that the site already set up, when it is not really.
  
  How to overcome this problem by 3.11 to contribute. I have Setup all connections using domain names and no ip.

  When you administer the web site, click on the "Web server" tab (left side). Remove all references to the IP number that you see there.

• FTP problem with just 1 host

  I worked on a site hosted by 1and1 for about 5 years. Recently however, whenever I try to connect using dreamweaver, it shows a simple file that indicates that the site has activated frontpage extensions and I can't use FTP until the extensions are disabled.
  
  My first reaction was to check that the extensions had not been enabled (they didn't, but as a precaution, I tried enabling them and then disable - no difference made).
  
  Then I tried using a command prompt to use the Basic windows FTP tool - that works very well. I can see everything as planned. At least I have a workaround, but it's a major inconvenience to say the least.
  
  I went through all the settings in Dreamweaver that I can find about FTP and none of this makes no difference. The killer came to use another computer to connect - that too is displayed with the same message when I use Dreamweaver.
  
  1and1 swear blind that the problem is not on their end and I have a flaw in Dreamweaver. The problem is that I can't imagine what it actually is and that I could do with some help to isolate the fault. Is DW made differently than a normal ordinary ftp client? Are there hidden parameters that can be at fault?

  Annoyingly, I just managed to work around the problem by destroying the site and recreating the bunch of parameters.

  Still no idea why it happened in the first place. Still no idea what the exact nature of the problem was.

• PIX and FTp problems

  We have a PIX running 4.4 (5). When internal and to access the FTp server form the outside, time-out of random connections. We ave tried passive mode with no improvement.

  Any other ideas?

  Thank you

  Brian

  Not sure if this applies to you: bug CSCds48493

  First thought is to upgrade the operating system at least 5.x or 6.x.

  It will be useful.

  Steve

• Help! Cannot publish my site on Muse! FTP problem!

  I've been struggling for HOURS on this... any help would be appreciated!

  I'm trying to publish my site for the first time on Adobe Muse. I watched the tutorials a million times.

  My information is correct, as I type (FTP server, username, PW, etc.) and the Muse finishes publish my site however, when he pulls up to my web site, I get this error:

  'Not found '.

  The / index.html the requested URL was not found on this server.

  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand. »

  I have contacted my host and they discover that my files are transferred in the directory of the user rather than in my field.

  I think I can fix myself if I can access the directory of the host on Adobe Muse, but I don't find that information anywhere!

  Can someone tell where to find the directory of the host, or give any other suggestions? I'm so close indeed!

  You will need to contact your host for information management. The host directory is on the server no Muse.

• FTP problem. incorrect data transfer cause?

  I'm trying to load a php page sends it data on a hosted payment page. The payment Center, which in this case is Barclaycard say when they test the environment page here (that I emailed) is sending all the correct data to their hosted payment page. When I try to download the page on their servers using dreamweaver cs 5.5 it does not work and some of the data is incorrect and shows their mistakes and not the correct information on the payment page.

  is it true in this and should I be try another FTP method or script?

  Thank you

  the payment Center discovered I couldn't use a £ sign their deliverance...